TM24

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (54)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (54)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (54)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (54)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (54)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (54)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (54)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (54)
  • M Stainless Steel (54)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (54)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (54)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (54)
  • K Cast Iron (54)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (54)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (54)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (54)
  • S High-Temp Alloys (32)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (32)
  • H Hardened Materials (32)
    • H1
      Hardened Materials 44-48 HRC (32)
Applications
Applications
  • ID Thread Turning ID Thread Turning (44)
  • OD Thread Turning OD Thread Turning (10)
  • Pipe Thread Pipe Thread (2)
  • Thread Milling Thread Milling (10)
  • Threading Threading (10)
Cutting Diameter
Cutting Diameter
  • 0.449 in (1)
  • 0.453 in (1)
  • 0.531 in (1)
  • 0.535 in (1)
  • 0.591 in (1)
  • 0.595 in (1)
  • 0.63 in (4)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 11.4 mm (1)
  • 11.5 mm (1)
  • 13.5 mm (1)
  • 13.601 mm (1)
  • 15.0 mm (1)
  • 15.101 mm (1)
  • 16.0 mm (4)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 13.9 mm (1)
  • 14.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.547 in (1)
  • 0.551 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Type of Thread
Type of Thread
  • BSPT (4)
  • BSW (12)
  • M (24)
  • NPT (4)
  • NPTF (4)
  • UN (26)
Reach
Reach
  • 1.02 in (2)
  • 1.024 in (2)
  • 1.098 in (1)
  • 1.102 in (1)
  • 1.181 in (2)
  • 1.417 in (1)
  • 1.421 in (1)
Reach Min to Reach Max
Reach
Reach
  • 25.901 mm (2)
  • 26.0 mm (2)
  • 27.901 mm (1)
  • 28.0 mm (1)
  • 30.0 mm (2)
  • 36.0 mm (1)
  • 36.1 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 88.217 (2)
  • 90.0 (8)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Weldon (10)
Number of Flutes
Number of Flutes
  • 1 (8)
  • 2 (2)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 3.189 in (1)
  • 3.228 in (2)
  • 3.269 in (1)
  • 3.273 in (1)
  • 3.311 in (1)
  • 3.346 in (1)
  • 3.39 in (1)
  • 3.583 in (1)
  • 3.622 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 81.0 mm (1)
  • 82.0 mm (2)
  • 83.0 mm (1)
  • 83.101 mm (1)
  • 84.101 mm (1)
  • 85.0 mm (1)
  • 86.101 mm (1)
  • 91.0 mm (1)
  • 92.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC610M (32)
  • KC635M (32)
Hand Of Tool
Hand Of Tool
  • R (10)
Wiper Insert
Wiper Insert
  • N (44)
Front-End
Cutting Width
Cutting Width
  • 0.9 in (2)
  • 0.916 in (2)
  • 0.929 in (4)
  • 0.937 in (2)
  • 0.946 in (12)
  • 0.948 in (4)
  • 0.951 in (2)
  • 0.96 in (2)
  • 0.965 in (6)
  • 0.969 in (2)
  • 0.974 in (2)
  • 0.984 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 22.85 mm (2)
  • 23.276 mm (2)
  • 23.6 mm (4)
  • 23.8 mm (2)
  • 24.0 mm (12)
  • 24.05 mm (4)
  • 24.125 mm (2)
  • 24.35 mm (2)
  • 24.5 mm (6)
  • 24.6 mm (2)
  • 24.75 mm (2)
  • 25.0 mm (4)
Cutting Width Min to Cutting Width Max
Thread TPI
Thread TPI
  • 10.0 (10)
  • 12.0 (10)
  • 14.0 (12)
  • 16.0 (10)
  • 18.0 (16)
  • 19.0 (14)
  • 20.0 (10)
  • 24.0 (10)
  • 28.0 (10)
  • 32.0 (10)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.5 mm (10)
  • 0.75 mm (10)
  • 1.0 mm (10)
  • 1.25 mm (10)
  • 1.5 mm (10)
  • 1.75 mm (10)
  • 2.0 mm (10)
  • 2.5 mm (10)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.02 in (10)
  • 0.03 in (10)
  • 0.039 in (10)
  • 0.049 in (10)
  • 0.06 in (10)
  • 0.069 in (10)
  • 0.079 in (10)
  • 0.098 in (10)
Thread Pitch Min to Thread Pitch Max
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • TM-RECTANGLE THREAD MILL 90 (44)
Cutting Tool Material
Cutting Tool Material
  • H W (44)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (10)
Back-End Diameter
Back-End Diameter
  • 19.0 mm (5)
  • 20.0 mm (5)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.748 in (5)
  • 0.787 in (5)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?