TM711

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (19)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (19)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (19)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (19)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (19)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (19)
  • M Stainless Steel (19)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (19)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (19)
  • K Cast Iron (19)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (19)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (19)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (19)
  • N Non-Ferrous Materials (19)
    • N1
      Wrought Aluminum (19)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (19)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (19)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (19)
    • N6
      Carbon, Graphite Composites, CFRP (19)
  • S High-Temp Alloys (19)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (19)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (19)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (19)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (19)
Applications
Applications
  • Thread Milling Thread Milling (19)
  • Threading Threading (19)
Cutting Diameter
Cutting Diameter
  • 0.095 in (1)
  • 0.124 in (1)
  • 0.157 in (1)
  • 0.189 in (1)
  • 0.232 in (1)
  • 0.237 in (2)
  • 0.315 in (2)
  • 0.394 in (4)
  • 0.457 in (1)
  • 0.473 in (2)
  • 0.551 in (3)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.401 mm (1)
  • 3.151 mm (1)
  • 4.0 mm (1)
  • 4.801 mm (1)
  • 5.9 mm (1)
  • 6.0 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (4)
  • 11.601 mm (1)
  • 12.0 mm (2)
  • 14.0 mm (3)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.25 mm (1)
  • 8.725 mm (1)
  • 10.775 mm (1)
  • 12.351 mm (1)
  • 16.45 mm (1)
  • 16.825 mm (2)
  • 20.201 mm (1)
  • 20.451 mm (1)
  • 24.475 mm (1)
  • 24.701 mm (1)
  • 25.35 mm (1)
  • 28.0 mm (1)
  • 29.151 mm (1)
  • 32.15 mm (1)
  • 32.926 mm (1)
  • 36.7 mm (1)
  • 41.151 mm (2)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.246 in (1)
  • 0.345 in (1)
  • 0.424 in (1)
  • 0.486 in (1)
  • 0.648 in (1)
  • 0.662 in (2)
  • 0.795 in (1)
  • 0.805 in (1)
  • 0.964 in (1)
  • 0.972 in (1)
  • 0.998 in (1)
  • 1.102 in (1)
  • 1.149 in (1)
  • 1.266 in (1)
  • 1.296 in (1)
  • 1.445 in (1)
  • 1.62 in (2)
Cutting Length Min to Cutting Length Max
Type of Thread
Type of Thread
  • M (10)
  • MF (9)
Thread Size
Thread Size
  • M10 X 1.0 (1)
  • M10 X 1.5 (1)
  • M12 X 1.0 (1)
  • M12 X 1.5 (1)
  • M12 X 1.75 (1)
  • M14 X 1.5 (1)
  • M14 X 2.0 (1)
  • M16 X 1.5 (1)
  • M16 X 2.0 (1)
  • M18 X 1.5 (1)
  • M20 X 1.5 (1)
  • M20 X 2.5 (1)
  • M3 X 0.5 (1)
  • M4 X 0.7 (1)
  • M5 X 0.8 (1)
  • M6 X 1 (1)
  • M8 X 0.75 (1)
  • M8 X 1.0 (1)
  • M8 X 1.25 (1)
Reach
Reach
  • 0.648 in (1)
  • 0.662 in (1)
  • 0.797 in (1)
  • 0.805 in (1)
  • 0.964 in (1)
  • 0.972 in (1)
  • 0.998 in (1)
  • 1.149 in (1)
  • 1.266 in (1)
  • 1.296 in (1)
  • 1.445 in (1)
  • 1.62 in (2)
Reach Min to Reach Max
Reach
Reach
  • 16.45 mm (1)
  • 16.825 mm (1)
  • 20.25 mm (1)
  • 20.451 mm (1)
  • 24.475 mm (1)
  • 24.701 mm (1)
  • 25.35 mm (1)
  • 29.151 mm (1)
  • 32.15 mm (1)
  • 32.926 mm (1)
  • 36.7 mm (1)
  • 41.151 mm (2)
Reach Min to Reach Max
Number of Flutes
Number of Flutes
  • 3 (9)
  • 4 (10)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.655 in (1)
  • 2.165 in (3)
  • 2.48 in (3)
  • 2.757 in (2)
  • 3.15 in (4)
  • 3.543 in (6)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 42.0 mm (1)
  • 55.0 mm (3)
  • 63.0 mm (3)
  • 70.0 mm (2)
  • 80.0 mm (4)
  • 90.0 mm (6)
Over All Length [L] Min to Over All Length [L] Max
Front-End
Thread Pitch
Thread Pitch
  • 0.5 mm (1)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.8 mm (1)
  • 1.0 mm (4)
  • 1.25 mm (1)
  • 1.5 mm (6)
  • 1.75 mm (1)
  • 2.0 mm (2)
  • 2.5 mm (1)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.02 in (1)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.031 in (1)
  • 0.039 in (4)
  • 0.049 in (1)
  • 0.06 in (6)
  • 0.069 in (1)
  • 0.079 in (2)
  • 0.098 in (1)
Thread Pitch Min to Thread Pitch Max
Back-End
Back-End Diameter
Back-End Diameter
  • 4.0 mm (1)
  • 6.0 mm (6)
  • 8.0 mm (2)
  • 10.0 mm (4)
  • 12.0 mm (3)
  • 14.0 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.157 in (1)
  • 0.237 in (6)
  • 0.315 in (2)
  • 0.394 in (4)
  • 0.473 in (3)
  • 0.551 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?