KM40TS™ Adapters

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (3)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (3)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (3)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (3)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (3)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (3)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (3)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (3)
  • M Stainless Steel (3)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (3)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (3)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (3)
  • K Cast Iron (3)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (3)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (3)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (3)
  • N Non-Ferrous Materials (3)
    • N1
      Wrought Aluminum (3)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (3)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
    • N6
      Carbon, Graphite Composites, CFRP (3)
    • N7
      MMC's (3)
  • S High-Temp Alloys (3)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (3)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (3)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (3)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (3)
  • H Hardened Materials (3)
    • H1
      Hardened Materials 44-48 HRC (3)
    • H2
      Hardened Materials 48-55 HRC (3)
    • H3
      Hardened Materials 56-60 HRC (3)
    • H4
      Hardened Materials >60 HRC (3)
Applications
Applications
  • Convex Drilling Convex Drilling (3)
  • Drilling Drilling (3)
  • Inclined Entry Drilling Inclined Entry Drilling (3)
  • Inclined Exit Drilling Inclined Exit Drilling (3)
  • X-Offset Drilling X-Offset Drilling (3)
Cutting Diameter
Cutting Diameter
  • 1.063 in (1)
  • 1.143 in (1)
  • 1.22 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 27.0 mm (1)
  • 29.0 mm (1)
  • 31.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 81.0 mm (1)
  • 87.0 mm (1)
  • 93.0 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 3.189 in (1)
  • 3.426 in (1)
  • 3.661 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 3.781 in (1)
  • 4.055 in (1)
  • 4.331 in (1)
Reach Min to Reach Max
Reach
Reach
  • 96.0 mm (1)
  • 103.0 mm (1)
  • 110.0 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • KM (3)
Number of Flutes
Number of Flutes
  • 2 (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (3)
  • 3.0 (3)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 5.944 in (1)
  • 6.219 in (1)
  • 6.494 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 150.951 mm (1)
  • 157.951 mm (1)
  • 164.951 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CS5 (3)
  • KC7140 (3)
  • KC720 (3)
  • KC7215 (3)
  • KC7225 (3)
  • KC7815 (3)
  • KC7820 (3)
  • KC7935 (3)
  • KC810 (3)
  • KC990 (3)
  • KCMS35 (3)
  • KCPK10 (3)
  • KCU25 (3)
  • KCU40 (3)
  • KD1425 (3)
  • KMF (3)
  • KU40D (3)
Hand Of Tool
Hand Of Tool
  • R (3)
Drill Type
Drill Type
  • 86-01 (3)
Front-End
Adapter Front-End
Adapter Front-End
  • BORING BAR ADAPTER (16)
  • COMBI SHELL ADAPTER (2)
  • DRILL CHUCK ADAPTER (1)
  • END MILL ADAPTER (10)
  • ER COLLET CHUCK (3)
  • EXTENSION (2)
  • HYDRAULIC CHUCK (5)
  • KM MODULAR ADAPTER (1)
  • REDUCER (1)
  • SHELL MILL ADAPTER (8)
  • TAP CHUCK ADAPTER (2)
  • WHISTLE NOTCH ADAPTER (8)
Front End Type
Front End Type
  • FDA - Milling Cutter Arbor (10)
  • KMT - KM Adapter (3)
  • SWB - Tap Chuck Adapter (2)
  • SZK - Collet Taper (3)
  • ZYL - Cylindrical Adapter (41)
Insert Shape
Insert Shape
  • X-TRIGON 84 (3)
Front End Style
Front End Style
  • FDA12 Transv Drive&CutRetScr (1)
  • FDA22 Transv Drive & SHCS (7)
  • FDA23 Longit&Transv Drv&SHCS (2)
  • KMT00 All KM, except 02,05,09 (3)
  • SWB-01 WFL#...WES#(Bilz) (2)
  • SZK02 Collets 8 Degree Taper (3)
  • ZYL01 Straight Shank (7)
  • ZYL10 Weldon Shank (10)
  • ZYL13 2Deg-Whistle Notch (8)
  • ZYL22 Boring Bar Shank (16)
Gage Length
Gage Length
  • 3 in (1)
  • 1.024 in (4)
  • 1.102 in (1)
  • 1.26 in (3)
  • 1.417 in (1)
  • 1.496 in (2)
  • 1.575 in (1)
  • 1.772 in (3)
  • 1.774 in (1)
  • 1.969 in (4)
  • 2.165 in (2)
  • 2.362 in (6)
  • 2.559 in (8)
  • 2.757 in (5)
  • 2.758 in (1)
  • 2.953 in (5)
  • 3.15 in (5)
  • 3.346 in (2)
  • 3.543 in (2)
  • 3.74 in (1)
  • 3.934 in (1)
Gage Length
Gage Length
  • 65 mm (8)
  • 60 mm (6)
  • 70 mm (5)
  • 75 mm (5)
  • 80 mm (5)
  • 26 mm (4)
  • 50 mm (4)
  • 32 mm (3)
  • 45 mm (3)
  • 38 mm (2)
  • 55 mm (2)
  • 85 mm (2)
  • 90 mm (2)
  • 28 mm (1)
  • 36 mm (1)
  • 40 mm (1)
  • 95 mm (1)
  • 45.051 mm (1)
  • 70.05 mm (1)
  • 76.2 mm (1)
  • 99.9 mm (1)
Front End Size
Front End Size
  • 0.039 in (1)
  • 0.237 in (4)
  • 0.315 in (4)
  • 0.375 in (2)
  • 0.394 in (4)
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.551 in (1)
  • 0.625 in (2)
  • 0.63 in (5)
  • 0.709 in (1)
  • 0.749 in (1)
  • 0.75 in (5)
  • 0.787 in (3)
  • 0.866 in (2)
  • 0.984 in (1)
  • 1.0 in (3)
  • 1.063 in (1)
  • 1.221 in (1)
  • 1.25 in (1)
  • 1.26 in (2)
  • 1.5 in (1)
  • 1.575 in (3)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 1.0 mm (1)
  • 6.0 mm (4)
  • 8.0 mm (4)
  • 9.525 mm (2)
  • 10.0 mm (4)
  • 12.0 mm (4)
  • 12.701 mm (4)
  • 14.0 mm (1)
  • 15.875 mm (2)
  • 16.0 mm (5)
  • 18.0 mm (1)
  • 19.026 mm (1)
  • 19.05 mm (5)
  • 20.0 mm (3)
  • 22.0 mm (2)
  • 25.0 mm (1)
  • 25.401 mm (3)
  • 27.0 mm (1)
  • 31.026 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (2)
  • 38.1 mm (1)
  • 40.0 mm (3)
Front End Size Min to Front End Size Max
Back-End
Connection Type
Connection Type
  • TAPER SHANK (3)
System Size
System Size
  • KM40TS (62)
Back-End Diameter
Back-End Diameter
  • 40.0 mm (62)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.575 in (62)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?