KM50TS™ Adapters

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (15)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (15)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (15)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (15)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (15)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (15)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (15)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (15)
  • M Stainless Steel (15)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (15)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (15)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (15)
  • K Cast Iron (15)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (15)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (15)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (15)
  • N Non-Ferrous Materials (15)
    • N1
      Wrought Aluminum (15)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (15)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (15)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (15)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (15)
    • N6
      Carbon, Graphite Composites, CFRP (15)
    • N7
      MMC's (15)
  • S High-Temp Alloys (15)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (15)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (15)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (15)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (15)
  • H Hardened Materials (13)
    • H1
      Hardened Materials 44-48 HRC (13)
    • H2
      Hardened Materials 48-55 HRC (13)
    • H3
      Hardened Materials 56-60 HRC (13)
    • H4
      Hardened Materials >60 HRC (13)
Applications
Applications
  • Convex Drilling Convex Drilling (4)
  • Drilling Drilling (4)
  • Inclined Entry Drilling Inclined Entry Drilling (4)
  • Inclined Exit Drilling Inclined Exit Drilling (4)
  • X-Offset Drilling X-Offset Drilling (4)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.687 in (1)
  • 0.75 in (1)
  • 0.814 in (1)
  • 0.875 in (1)
  • 0.937 in (1)
  • 1.0 in (1)
  • 1.125 in (1)
  • 1.25 in (1)
  • 1.375 in (1)
  • 1.5 in (1)
  • 1.625 in (1)
  • 1.75 in (1)
  • 1.875 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 17.45 mm (1)
  • 19.05 mm (1)
  • 20.651 mm (1)
  • 22.225 mm (1)
  • 23.8 mm (1)
  • 25.401 mm (1)
  • 28.576 mm (1)
  • 31.75 mm (1)
  • 34.926 mm (1)
  • 38.1 mm (1)
  • 41.276 mm (1)
  • 44.45 mm (1)
  • 47.625 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 47.625 mm (1)
  • 52.401 mm (1)
  • 57.151 mm (1)
  • 61.901 mm (1)
  • 66.675 mm (1)
  • 71.45 mm (1)
  • 76.2 mm (1)
  • 85.726 mm (1)
  • 95.25 mm (1)
  • 104.775 mm (1)
  • 114.301 mm (1)
  • 123.825 mm (1)
  • 133.35 mm (1)
  • 142.875 mm (1)
  • 152.4 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.875 in (1)
  • 2.063 in (1)
  • 2.25 in (1)
  • 2.437 in (1)
  • 2.625 in (1)
  • 2.813 in (1)
  • 3.0 in (1)
  • 3.375 in (1)
  • 3.75 in (1)
  • 4.125 in (1)
  • 4.5 in (1)
  • 4.875 in (1)
  • 5.25 in (1)
  • 5.625 in (1)
  • 6.0 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.52 in (1)
  • 2.835 in (1)
  • 2.992 in (1)
  • 3.189 in (1)
  • 3.386 in (1)
  • 3.543 in (1)
  • 3.74 in (1)
  • 4.213 in (1)
  • 4.606 in (1)
  • 5.079 in (1)
  • 5.472 in (1)
  • 6.22 in (1)
  • 6.575 in (1)
  • 7.165 in (1)
  • 7.521 in (1)
Reach Min to Reach Max
Reach
Reach
  • 64.0 mm (1)
  • 72.0 mm (1)
  • 76.0 mm (1)
  • 81.0 mm (1)
  • 86.0 mm (1)
  • 90.0 mm (1)
  • 95.0 mm (1)
  • 107.0 mm (1)
  • 117.0 mm (1)
  • 129.0 mm (1)
  • 139.0 mm (1)
  • 158.0 mm (1)
  • 167.0 mm (1)
  • 182.0 mm (1)
  • 191.0 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • KM (15)
Number of Flutes
Number of Flutes
  • 2 (15)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (9)
  • 3.0 (15)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 4.906 in (1)
  • 5.094 in (1)
  • 5.281 in (1)
  • 5.469 in (1)
  • 5.656 in (1)
  • 5.844 in (1)
  • 6.008 in (1)
  • 6.508 in (1)
  • 6.883 in (1)
  • 7.37 in (1)
  • 7.758 in (1)
  • 8.496 in (1)
  • 8.871 in (1)
  • 9.443 in (1)
  • 9.818 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 124.625 mm (1)
  • 129.4 mm (1)
  • 134.15 mm (1)
  • 138.925 mm (1)
  • 143.675 mm (1)
  • 148.425 mm (1)
  • 152.6 mm (1)
  • 165.3 mm (1)
  • 174.826 mm (1)
  • 187.201 mm (1)
  • 197.05 mm (1)
  • 215.8 mm (1)
  • 225.326 mm (1)
  • 239.851 mm (1)
  • 249.375 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CS5 (15)
  • K6 (5)
  • KC7140 (15)
  • KC720 (15)
  • KC7215 (15)
  • KC7225 (15)
  • KC7815 (15)
  • KC7820 (9)
  • KC7845 (6)
  • KC7935 (15)
  • KC810 (13)
  • KC990 (15)
  • KCMS35 (12)
  • KCPK10 (15)
  • KCU25 (15)
  • KCU40 (15)
  • KD1425 (13)
  • KMF (15)
  • KU40D (15)
Hand Of Tool
Hand Of Tool
  • R (15)
Drill Type
Drill Type
  • 86-01 (15)
Front-End
Adapter Front-End
Adapter Front-End
  • BORING BAR ADAPTER (16)
  • COMBI SHELL ADAPTER (3)
  • DRILL CHUCK ADAPTER (1)
  • END MILL ADAPTER (12)
  • ER COLLET CHUCK (3)
  • EXTENSION (2)
  • HYDRAULIC CHUCK (8)
  • REDUCER (2)
  • SHELL MILL ADAPTER (9)
  • TAP CHUCK ADAPTER (2)
  • WHISTLE NOTCH ADAPTER (10)
Front End Type
Front End Type
  • FDA - Milling Cutter Arbor (12)
  • KMT - KM Adapter (4)
  • SWB - Tap Chuck Adapter (2)
  • SZK - Collet Taper (3)
  • ZYL - Cylindrical Adapter (47)
Insert Shape
Insert Shape
  • X-TRIGON 84 (15)
Front End Style
Front End Style
  • FDA13 Long&TranDrv&CutRetScr (2)
  • FDA22 Transv Drive & SHCS (9)
  • FDA23 Longit&Transv Drv&SHCS (1)
  • KMT00 All KM, except 02,05,09 (4)
  • SWB-01 WFL#...WES#(Bilz) (2)
  • SZK02 Collets 8 Degree Taper (3)
  • ZYL01 Straight Shank (9)
  • ZYL10 Weldon Shank (12)
  • ZYL13 2Deg-Whistle Notch (10)
  • ZYL22 Boring Bar Shank (16)
Gage Length
Gage Length
  • 1.024 in (3)
  • 1.102 in (1)
  • 1.26 in (3)
  • 1.575 in (3)
  • 1.655 in (1)
  • 1.772 in (2)
  • 1.969 in (4)
  • 1.971 in (1)
  • 2.165 in (4)
  • 2.362 in (7)
  • 2.559 in (6)
  • 2.757 in (9)
  • 2.953 in (2)
  • 2.955 in (1)
  • 3.15 in (8)
  • 3.346 in (6)
  • 3.543 in (2)
  • 3.74 in (1)
  • 3.938 in (2)
  • 4.134 in (1)
  • 4.366 in (1)
Gage Length
Gage Length
  • 70 mm (9)
  • 80 mm (8)
  • 60 mm (7)
  • 65 mm (6)
  • 85 mm (6)
  • 50 mm (4)
  • 55 mm (4)
  • 26 mm (3)
  • 32 mm (3)
  • 40 mm (3)
  • 100 mm (2)
  • 45 mm (2)
  • 75 mm (2)
  • 90 mm (2)
  • 105 mm (1)
  • 28 mm (1)
  • 42 mm (1)
  • 95 mm (1)
  • 50.051 mm (1)
  • 75.05 mm (1)
  • 110.9 mm (1)
Front End Size
Front End Size
  • 0.098 in (1)
  • 0.237 in (3)
  • 0.315 in (3)
  • 0.375 in (2)
  • 0.394 in (4)
  • 0.473 in (4)
  • 0.5 in (3)
  • 0.551 in (2)
  • 0.625 in (2)
  • 0.63 in (4)
  • 0.709 in (2)
  • 0.749 in (1)
  • 0.75 in (4)
  • 0.787 in (4)
  • 0.866 in (2)
  • 0.984 in (3)
  • 1.0 in (4)
  • 1.063 in (2)
  • 1.221 in (1)
  • 1.25 in (3)
  • 1.26 in (6)
  • 1.5 in (1)
  • 1.575 in (2)
  • 1.969 in (2)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 2.5 mm (1)
  • 6.0 mm (3)
  • 8.0 mm (3)
  • 9.525 mm (2)
  • 10.0 mm (4)
  • 12.0 mm (4)
  • 12.701 mm (3)
  • 14.0 mm (2)
  • 15.875 mm (2)
  • 16.0 mm (4)
  • 18.0 mm (2)
  • 19.026 mm (1)
  • 19.05 mm (4)
  • 20.0 mm (4)
  • 22.0 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (4)
  • 27.0 mm (2)
  • 31.026 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (6)
  • 38.1 mm (1)
  • 40.0 mm (2)
  • 50.0 mm (2)
Front End Size Min to Front End Size Max
Back-End
Connection Type
Connection Type
  • TAPER SHANK (15)
System Size
System Size
  • KM50 (11)
  • KM50TS (72)
Back-End Diameter
Back-End Diameter
  • 50.0 mm (83)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.969 in (83)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?