successfully added to cart
View Cart

Notifications

Mark all as read

KM80ATC™

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (52)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (52)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (52)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (52)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (52)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (52)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (52)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (52)
  • M Stainless Steel (52)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (52)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (52)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (52)
  • K Cast Iron (52)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (52)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (52)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (52)
  • N Non-Ferrous Materials (40)
    • N1
      Wrought Aluminum
      (40)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (40)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (21)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (38)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (38)
    • N6
      Carbon, Graphite Composites, CFRP
      (36)
    • N7
      MMC's
      (38)
  • S High-Temp Alloys (50)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (50)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (50)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (50)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (50)
  • H Hardened Materials (35)
    • H1
      Hardened Materials 44-48 HRC
      (35)
    • H2
      Hardened Materials 48-55 HRC
      (33)
    • H3
      Hardened Materials 56-60 HRC
      (33)
    • H4
      Hardened Materials >60 HRC
      (29)
Applications
Applications
  • Chamfer Turning Chamfer Turning (3)
  • Cut-Off Cut-Off (3)
  • Deep Grooving Deep Grooving (3)
  • Face Grooving Face Grooving (3)
  • Facing Facing (30)
  • Grooving Grooving (7)
  • ID Grooving ID Grooving (4)
  • ID Thread Turning ID Thread Turning (4)
  • Multiple Direction Cutting Multiple Direction Cutting (33)
  • OD Thread Turning OD Thread Turning (7)
  • Plunge Turning Plunge Turning (3)
  • Profiling Profiling (17)
  • TRN Boring TRN Boring (31)
  • Threading Threading (7)
  • Turning Turning (38)
Type of Thread
Type of Thread
  • 60 (7)
  • ACME (7)
  • API (7)
  • API RD (3)
  • BSW (3)
  • BUTTRESS (7)
  • M (3)
  • NPT (3)
  • STUB ACME (3)
  • UN (7)
  • UNJ (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (50)
  • Interrupted (27)
  • Lightly Interrupted Cut (50)
  • Smooth Cut (50)
  • Varying Depth of Cut (50)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (15)
  • 90.0 (13)
  • 93.0 (10)
  • 95.0 (8)
  • 107.5 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (35)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (30)
  • 2.0 (36)
  • 4.0 (39)
  • 8.0 (27)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (3)
  • 0.003 in (7)
  • 0.004 in (19)
  • 0.005 in (3)
  • 0.006 in (7)
  • 0.007 in (7)
  • 0.008 in (17)
  • 0.01 in (7)
  • 0.011 in (3)
  • 0.012 in (3)
  • 0.014 in (13)
  • 0.016 in (21)
  • 0.017 in (3)
  • 0.019 in (7)
  • 0.02 in (3)
  • 0.023 in (7)
  • 0.031 in (32)
  • 0.035 in (7)
  • 0.039 in (3)
  • 0.047 in (32)
  • 0.049 in (3)
  • 0.06 in (3)
  • 0.062 in (5)
  • 0.063 in (44)
  • 0.069 in (3)
  • 0.078 in (3)
  • 0.079 in (7)
  • 0.089 in (7)
  • 0.094 in (18)
  • 0.095 in (30)
  • 0.098 in (4)
  • 0.125 in (4)
  • 0.126 in (12)
  • 0.157 in (5)
  • 0.197 in (4)
  • 0.237 in (4)
  • 0.394 in (2)
  • 0.492 in (2)
  • 0.63 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (3)
  • 0.076 mm (7)
  • 0.1 mm (19)
  • 0.125 mm (3)
  • 0.151 mm (7)
  • 0.176 mm (7)
  • 0.2 mm (17)
  • 0.225 mm (3)
  • 0.25 mm (7)
  • 0.275 mm (3)
  • 0.301 mm (3)
  • 0.325 mm (7)
  • 0.351 mm (13)
  • 0.4 mm (21)
  • 0.426 mm (3)
  • 0.45 mm (7)
  • 0.476 mm (1)
  • 0.5 mm (3)
  • 0.576 mm (7)
  • 0.775 mm (3)
  • 0.8 mm (29)
  • 0.9 mm (7)
  • 1.0 mm (3)
  • 1.201 mm (32)
  • 1.25 mm (3)
  • 1.5 mm (3)
  • 1.576 mm (5)
  • 1.6 mm (44)
  • 1.75 mm (3)
  • 1.975 mm (3)
  • 2.0 mm (7)
  • 2.25 mm (7)
  • 2.375 mm (18)
  • 2.401 mm (30)
  • 2.5 mm (4)
  • 3.176 mm (4)
  • 3.2 mm (12)
  • 4.0 mm (5)
  • 5.0 mm (4)
  • 6.0 mm (4)
  • 10.0 mm (2)
  • 12.5 mm (2)
  • 16.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (24)
  • CL4 (21)
  • CM2 (23)
  • CM3 (21)
  • CPX (29)
  • K090 (29)
  • K10M (29)
  • K10P (24)
  • K20K (29)
  • K25P (27)
  • K313 (38)
  • K420 (39)
  • K68 (38)
  • KC210 (25)
  • KC250 (24)
  • KC5010 (48)
  • KC5025 (36)
  • KC5410 (36)
  • KC5510 (29)
  • KC720 (24)
  • KC730 (32)
  • KC7310 (29)
  • KC8050 (41)
  • KC810 (38)
  • KC850 (48)
  • KC9010 (31)
  • KC9025 (39)
  • KC910 (32)
  • KC9105 (24)
  • KC9110 (52)
  • KC9120 (42)
  • KC9125 (45)
  • KC9140 (39)
  • KC9145 (39)
  • KC9215 (29)
  • KC9225 (29)
  • KC9240 (43)
  • KC9240NEW (38)
  • KC9245 (29)
  • KC9315 (31)
  • KC9320 (36)
  • KC9325 (29)
  • KC935 (41)
  • KC950 (41)
  • KC990 (34)
  • KCK05 (29)
  • KCK05B (29)
  • KCK15 (29)
  • KCK15B (31)
  • KCK20 (40)
  • KCK20B (43)
  • KCM15 (29)
  • KCM15B (24)
  • KCM25 (36)
  • KCM25B (34)
  • KCM35 (29)
  • KCM35B (21)
  • KCP05B (21)
  • KCP10 (45)
  • KCP10B (45)
  • KCP25 (45)
  • KCP25B (50)
  • KCP30 (41)
  • KCP30B (37)
  • KCP40 (37)
  • KCP40B (37)
  • KCPK05 (33)
  • KCS10B (29)
  • KCU10 (48)
  • KCU25 (38)
  • KT175 (21)
  • KT315 (23)
  • KU10T (23)
  • KU30T (36)
  • KY1320 (24)
  • KY1615 (26)
  • KY3000 (36)
  • KY3400 (21)
  • KY3500 (29)
  • KY4400 (24)
  • KYHK15B (24)
  • KYK35 (29)
  • NL250 (29)
  • NL300 (35)
  • NL920 (25)
  • SP0819 (27)
  • SP3019 (27)
  • SPADAP (21)
  • TN30P (23)
  • TN7015 (30)
  • TN7025 (30)
  • TN7110 (22)
  • TN7115 (30)
  • TN7125 (26)
  • TN8025 (28)
  • WK20CT (22)
  • WM25CT (25)
  • WP15CT (32)
  • WP25CT (32)
  • WP35CT (32)
Hand Of Tool
Hand Of Tool
  • L (17)
  • N (2)
  • R (16)
Wiper Insert
Wiper Insert
  • N (52)
  • Y (25)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (3)
  • 41.301 mm (1)
  • 47.6 mm (1)
  • 57.2 mm (2)
  • 88.9 mm (1)
  • 106.0 mm (31)
  • 139.701 mm (1)
  • 174.601 mm (1)
  • 209.601 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (3)
  • 1.627 in (1)
  • 1.874 in (1)
  • 2.253 in (2)
  • 3.5 in (1)
  • 4.173 in (31)
  • 5.5 in (1)
  • 6.875 in (1)
  • 8.252 in (2)
  • 8.752 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (7)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (4)
  • E (13)
  • S (18)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (26)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
  • 2.757 in (31)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (31)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Adapter Front-End
Adapter Front-End
  • BORING BAR ADAPTER (5)
  • CARTRIDGE MOUNT (4)
  • DRILL SHANK 2 FLATS (5)
  • END MILL ADAPTER (4)
  • ER COLLET CHUCK (2)
  • EXTENSION (2)
  • REDUCER (5)
  • SHELL MILL ADAPTER (12)
  • SHRINK FIT ADAPTER (16)
  • SQUARE SHANK ADAPTER (10)
  • WHISTLE DRIVE ADAPTER (3)
  • WHISTLE NOTCH ADAPTER (11)
Clamp Style
Clamp Style
  • D (16)
  • M (23)
  • N (7)
  • P (6)
Cutting Width
Cutting Width
  • 0.039 in (3)
  • 0.047 in (3)
  • 0.06 in (3)
  • 0.062 in (3)
  • 0.069 in (3)
  • 0.073 in (3)
  • 0.078 in (3)
  • 0.079 in (3)
  • 0.088 in (3)
  • 0.089 in (3)
  • 0.095 in (3)
  • 0.097 in (3)
  • 0.098 in (3)
  • 0.105 in (3)
  • 0.108 in (3)
  • 0.11 in (3)
  • 0.119 in (7)
  • 0.122 in (3)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (3)
  • 0.131 in (1)
  • 0.138 in (7)
  • 0.143 in (3)
  • 0.156 in (3)
  • 0.157 in (7)
  • 0.167 in (7)
  • 0.169 in (3)
  • 0.177 in (7)
  • 0.178 in (3)
  • 0.181 in (1)
  • 0.185 in (5)
  • 0.188 in (7)
  • 0.189 in (7)
  • 0.192 in (1)
  • 0.193 in (1)
  • 0.195 in (3)
  • 0.197 in (4)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.219 in (4)
  • 0.237 in (4)
  • 0.25 in (4)
  • 0.255 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (3)
  • 1.201 mm (3)
  • 1.5 mm (3)
  • 1.576 mm (3)
  • 1.75 mm (3)
  • 1.826 mm (3)
  • 1.975 mm (3)
  • 2.0 mm (3)
  • 2.2 mm (3)
  • 2.225 mm (3)
  • 2.25 mm (3)
  • 2.401 mm (3)
  • 2.475 mm (3)
  • 2.5 mm (3)
  • 2.676 mm (3)
  • 2.75 mm (3)
  • 2.801 mm (3)
  • 3.0 mm (7)
  • 3.1 mm (3)
  • 3.176 mm (7)
  • 3.2 mm (7)
  • 3.25 mm (3)
  • 3.325 mm (1)
  • 3.5 mm (7)
  • 3.6 mm (3)
  • 3.95 mm (3)
  • 3.975 mm (1)
  • 4.0 mm (7)
  • 4.25 mm (7)
  • 4.3 mm (3)
  • 4.5 mm (7)
  • 4.525 mm (3)
  • 4.601 mm (1)
  • 4.7 mm (5)
  • 4.775 mm (7)
  • 4.801 mm (7)
  • 4.875 mm (1)
  • 4.9 mm (1)
  • 4.95 mm (3)
  • 5.0 mm (4)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.575 mm (4)
  • 6.0 mm (4)
  • 6.351 mm (4)
  • 6.476 mm (4)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • FDA - Milling Cutter Arbor (9)
  • KMT - KM Adapter (7)
  • MCS - Modular Cartridge System (4)
  • SPK-Holding Arbor-Spindle Head (3)
  • SZK - Collet Taper (2)
  • VKT - Square Shank (10)
  • ZYL - Cylindrical Adapter (44)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (15)
  • D-DIAMOND/RHOMBIC 55 (12)
  • R-ROUND (6)
  • S-SQUARE 90 (10)
  • TN-TOP NOTCH (7)
  • V-DIAMOND/RHOMBIC 35 (2)
Front End Style
Front End Style
  • FDA12 Transv Drive&CutRetScr (1)
  • FDA22 Transv Drive & SHCS (7)
  • FDA42TranDrvw/CtrScrwORBoltCir (1)
  • KMT00 All KM, except 02,05,09 (7)
  • MCS01 Modular Deep Grooving (4)
  • SPK02 Bolt Circ Dia 101.6 mm (3)
  • SZK02 Collets 8 Degree Taper (2)
  • VKT01 Std Design (10)
  • ZYL01 Straight Shank (16)
  • ZYL10 Weldon Shank (4)
  • ZYL13 2Deg-Whistle Notch (11)
  • ZYL22 Boring Bar Shank (5)
  • ZYL56 2Plain Clamp Surf w/Pcs (5)
  • ZYL63 2Deg Surf w/Cyl.w/drive (3)
Insert Size
Insert Size
  • 3 (3)
  • 4 (4)
Gage Length
Gage Length
  • 5 in (1)
  • 1.48 in (2)
  • 1.575 in (5)
  • 1.693 in (2)
  • 1.772 in (5)
  • 1.846 in (2)
  • 2.165 in (2)
  • 2.25 in (1)
  • 2.362 in (2)
  • 2.5 in (2)
  • 2.559 in (3)
  • 2.618 in (2)
  • 2.757 in (1)
  • 2.953 in (1)
  • 3.15 in (4)
  • 3.346 in (4)
  • 3.5 in (1)
  • 3.543 in (4)
  • 3.74 in (4)
  • 3.819 in (1)
  • 3.938 in (5)
  • 4.134 in (7)
  • 4.331 in (1)
  • 4.5 in (2)
  • 4.529 in (2)
  • 4.724 in (3)
  • 4.921 in (1)
  • 5.118 in (3)
  • 5.5 in (1)
  • 5.513 in (1)
  • 6.299 in (2)
  • 6.5 in (1)
  • 8.5 in (1)
Gage Length
Gage Length
  • 105 mm (7)
  • 100 mm (5)
  • 40 mm (5)
  • 45 mm (5)
  • 80 mm (4)
  • 85 mm (4)
  • 90 mm (4)
  • 95 mm (4)
  • 120 mm (3)
  • 130 mm (3)
  • 65 mm (3)
  • 115 mm (2)
  • 160 mm (2)
  • 43 mm (2)
  • 55 mm (2)
  • 60 mm (2)
  • 110 mm (1)
  • 125 mm (1)
  • 127 mm (1)
  • 140 mm (1)
  • 70 mm (1)
  • 75 mm (1)
  • 97 mm (1)
  • 37.6 mm (2)
  • 46.901 mm (2)
  • 57.151 mm (1)
  • 63.5 mm (2)
  • 66.5 mm (2)
  • 88.9 mm (1)
  • 114.301 mm (2)
  • 139.701 mm (1)
  • 165.101 mm (1)
  • 215.9 mm (1)
Front End Size
Front End Size
  • 0.01 in (1)
  • 0.014 in (2)
  • 0.015 in (1)
  • 0.016 in (1)
  • 0.019 in (3)
  • 0.02 in (1)
  • 0.022 in (1)
  • 0.023 in (1)
  • 0.025 in (4)
  • 0.028 in (1)
  • 0.03 in (2)
  • 0.031 in (2)
  • 0.038 in (1)
  • 0.039 in (5)
  • 0.042 in (1)
  • 0.049 in (9)
  • 0.06 in (5)
  • 0.062 in (5)
  • 0.078 in (4)
  • 0.079 in (5)
  • 0.093 in (1)
  • 0.097 in (3)
  • 0.098 in (2)
  • 0.124 in (2)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 6.0 mm (1)
  • 7.95 mm (1)
  • 8.0 mm (1)
  • 9.525 mm (1)
  • 10.0 mm (1)
  • 11.125 mm (1)
  • 12.0 mm (2)
  • 12.701 mm (1)
  • 14.0 mm (1)
  • 14.3 mm (1)
  • 15.875 mm (2)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (1)
  • 25.401 mm (5)
  • 27.0 mm (1)
  • 31.701 mm (2)
  • 31.75 mm (3)
  • 32.0 mm (4)
  • 38.1 mm (5)
  • 40.0 mm (5)
  • 50.0 mm (4)
  • 50.801 mm (5)
  • 60.0 mm (1)
  • 63.0 mm (3)
  • 63.5 mm (2)
  • 80.0 mm (2)
Front End Size Min to Front End Size Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (18)
  • B L (19)
  • C A (31)
  • C N (36)
  • D P (21)
  • H T (25)
  • H W (52)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (35)
System Size
System Size
  • KM80 (5)
  • KM80ATC (109)
Back-End Diameter
Back-End Diameter
  • 80.0 mm (52)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 3.15 in (52)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
2220287 KM80ATCDDUNL15KC04 KM80ATCDDUNL15KC04 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150408/DN..432 2.23 4.91
    List price:
    $621.86 /each.
    Your price::
    Qty
    2036382 KM80ATCDDUNL15KC06 KM80ATCDDUNL15KC06 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN..442 2.23 4.91
      List price:
      $628.08 /each.
      Your price::
      Qty
      2220286 KM80ATCDDUNR15KC04 KM80ATCDDUNR15KC04 70.0000 2.756 53.0000 2.087 106.0000 4.173 DN..150408/DN..432 2.23 4.91
        List price:
        $621.86 /each.
        Your price::
        Qty
        2036381 KM80ATCDDUNR15KC06 KM80ATCDDUNR15KC06 70.0000 2.756 53.0000 2.086 106.0000 4.173 DN..150608/DN..442 2.23 4.91
          List price:
          $628.08 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          KM80ATC™ Cutting Units

          (3 Products)
          • Shank - KM-ATCShank - KM-ATC
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
          2398753 KM80ATCNSL3 KM80ATCNSL3 70.0000 2.755 53.0000 2.086 NG3L 2.16 4.77
            List price:
            $606.71 /each.
            Your price::
            Qty
            2044321 KM80ATCNSL4 KM80ATCNSL4 70.0000 2.755 53.0000 2.086 NG4L 2.17 4.77