A2™ • Single-Ended Cut-Off
If your machining operations depend on accurate single-ended cut-off tools, you can immediately improve your processes with A2 cut-off tools. These solid carbide tools are optimal for high-speed applications with cast iron, non-ferrous metals, and other tough workpiece materials. When you use cut-off tools from Kennametal's A2 line, you achieve consistency while reducing downtime with inferior tools. If you have questions about our A2 line or need a specialty tool, our design team is ready to assist.
- P Steel (149)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(149)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(149)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(149)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(149)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(149)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(149)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(149)
- M Stainless Steel (150)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(150)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(150)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(150)
- K Cast Iron (141)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(141)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(141)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(141)
- N Non-Ferrous Materials (141)
- N1Wrought Aluminum (141)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(140)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (141)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (140)
- N6Carbon, Graphite Composites, CFRP (140)
- S High-Temp Alloys (141)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(141)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(141)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(141)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(141)
- Cut-Off (150)
- Heavily Interrupted Cut (141)
- Lightly Interrupted Cut (141)
- Smooth Cut (150)
- 90.0 (35)
- Cutoff Support Blade A1-A3 (35)
- 1.0 (150)
- 2.953 in(2)
- 3.386 in(7)
- 3.396 in(2)
- 3.551 in(2)
- 3.553 in(1)
- 3.946 in(1)
- 4.331 in(12)
- 4.339 in(2)
- 4.341 in(11)
- 4.343 in(1)
- 4.931 in(4)
- 5.315 in(3)
- 5.913 in(3)
- 5.915 in(4)
- 5.917 in(2)
- 10.242 in(1)
- 75.0 mm(2)
- 86.0 mm(7)
- 86.25 mm(2)
- 90.2 mm(2)
- 90.25 mm(1)
- 100.2 mm(1)
- 110.0 mm(12)
- 110.2 mm(2)
- 110.25 mm(11)
- 110.301 mm(1)
- 125.25 mm(4)
- 135.0 mm(3)
- 150.201 mm(3)
- 150.25 mm(4)
- 150.3 mm(2)
- 260.151 mm(1)
- 0.004 in(20)
- 0.006 in(11)
- 0.008 in(69)
- 0.012 in(49)
- 0.016 in(11)
- 0.1 mm(20)
- 0.151 mm(11)
- 0.2 mm(69)
- 0.301 mm(49)
- 0.4 mm(11)
- 0.0 mm(115)
- 0.0 in(115)
- KC5025 (84)
- KCU25 (91)
- KMF (31)
- KT315 (37)
- L (7)
- N (21)
- R (7)
- N (150)
- 1.25 mm(2)
- 0.049 in(2)
- 1.181 in(3)
- 1.339 in(1)
- 1.496 in(1)
- 1.655 in(9)
- 2.598 in(4)
- 30.0 mm(3)
- 34.0 mm(1)
- 38.0 mm(1)
- 42.0 mm(9)
- 66.0 mm(4)
- E (35)
- NEUTRAL (ZERO) (13)
- POSITIVE-ZERO (20)
- Y (35)
- 0.055 in(4)
- 0.061 in(5)
- 0.063 in(17)
- 0.088 in(38)
- 0.119 in(40)
- 0.12 in(13)
- 0.122 in(13)
- 0.157 in(17)
- 0.159 in(11)
- 0.197 in(10)
- 0.237 in(7)
- 0.315 in(5)
- 1.401 mm(4)
- 1.55 mm(5)
- 1.6 mm(17)
- 2.2 mm(38)
- 3.0 mm(40)
- 3.051 mm(13)
- 3.1 mm(13)
- 4.0 mm(17)
- 4.05 mm(11)
- 5.0 mm(10)
- 6.0 mm(7)
- 8.0 mm(5)
- PRISMATIC (150)
- 0.591 in(2)
- 0.63 in(1)
- 0.669 in(1)
- 0.748 in(1)
- 0.787 in(1)
- 0.828 in(9)
- 0.984 in(3)
- 1.299 in(4)
- 1.575 in(6)
- 1.969 in(3)
- 2.362 in(3)
- 4.724 in(1)
- 15.0 mm(2)
- 16.0 mm(1)
- 17.0 mm(1)
- 19.0 mm(1)
- 20.0 mm(1)
- 21.0 mm(9)
- 25.0 mm(3)
- 33.0 mm(4)
- 40.0 mm(6)
- 50.0 mm(3)
- 60.0 mm(3)
- 120.0 mm(1)
- PRISMATIC (115)
- 1 (16)
- 1B (2)
- 2 (29)
- 3 (33)
- 4 (18)
- 5 (8)
- 6 (5)
- 8 (4)
- H T (37)
- H W (141)
- CUTOFF BLADE (35)
- 0.748 in(2)
- 1.024 in(16)
- 1.26 in(16)
- 2.066 in(1)
- 19.0 mm(2)
- 26.0 mm(16)
- 32.0 mm(16)
- 52.475 mm(1)
- 0.07 in(3)
- 0.072 in(5)
- 0.095 in(7)
- 0.134 in(2)
- 0.174 in(2)
- 0.213 in(2)
- 0.276 in(1)
- 0.313 in(13)
- 1.776 mm(3)
- 1.8 mm(5)
- 2.401 mm(7)
- 3.401 mm(2)
- 4.4 mm(2)
- 5.4 mm(2)
- 7.0 mm(1)
- 7.95 mm(13)