A2 Cut-Off Blades

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (35)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (35)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (35)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (35)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (35)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (35)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (35)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (35)
  • M Stainless Steel (35)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (35)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (35)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (35)
  • K Cast Iron (35)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (35)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (35)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (35)
  • N Non-Ferrous Materials (35)
    • N1
      Wrought Aluminum (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (35)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (35)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (35)
    • N6
      Carbon, Graphite Composites, CFRP (35)
  • S High-Temp Alloys (35)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (35)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (35)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (35)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (35)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (35)
  • Lightly Interrupted Cut (35)
  • Smooth Cut (35)
  • Varying Depth of Cut (35)
Over All Length [L]
Over All Length [L]
  • 3.396 in (2)
  • 3.551 in (2)
  • 3.553 in (1)
  • 3.946 in (1)
  • 4.331 in (1)
  • 4.339 in (2)
  • 4.341 in (11)
  • 4.343 in (1)
  • 4.931 in (4)
  • 5.913 in (3)
  • 5.915 in (4)
  • 5.917 in (2)
  • 10.242 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 86.25 mm (2)
  • 90.2 mm (2)
  • 90.25 mm (1)
  • 100.2 mm (1)
  • 110.0 mm (1)
  • 110.2 mm (2)
  • 110.25 mm (11)
  • 110.301 mm (1)
  • 125.25 mm (4)
  • 150.201 mm (3)
  • 150.25 mm (4)
  • 150.3 mm (2)
  • 260.151 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (14)
  • 0.006 in (5)
  • 0.008 in (25)
  • 0.012 in (29)
  • 0.016 in (5)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (14)
  • 0.151 mm (5)
  • 0.2 mm (25)
  • 0.301 mm (29)
  • 0.4 mm (5)
Corner Radius Min to Corner Radius Max
Application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC5025 (35)
  • KCU25 (35)
  • KMF (30)
  • KT315 (28)
Hand Of Tool
Hand Of Tool
  • L (7)
  • N (21)
  • R (7)
F Dimension
F Dimension
  • 1.25 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.049 in (2)
F Dimension Min to F Dimension Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 1.181 in (3)
  • 1.339 in (1)
  • 1.496 in (1)
  • 1.655 in (9)
  • 2.598 in (4)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 30.0 mm (3)
  • 34.0 mm (1)
  • 38.0 mm (1)
  • 42.0 mm (9)
  • 66.0 mm (4)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (13)
  • POSITIVE-ZERO (20)
Front-End
Cutting Width
Cutting Width
  • 0.055 in (2)
  • 0.061 in (3)
  • 0.063 in (3)
  • 0.088 in (9)
  • 0.119 in (11)
  • 0.12 in (11)
  • 0.122 in (11)
  • 0.157 in (5)
  • 0.159 in (5)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.315 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.401 mm (2)
  • 1.55 mm (3)
  • 1.6 mm (3)
  • 2.2 mm (9)
  • 3.0 mm (11)
  • 3.051 mm (11)
  • 3.1 mm (11)
  • 4.0 mm (5)
  • 4.05 mm (5)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 8.0 mm (1)
Cutting Width Min to Cutting Width Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.591 in (2)
  • 0.63 in (1)
  • 0.669 in (1)
  • 0.748 in (1)
  • 0.787 in (1)
  • 0.828 in (9)
  • 0.984 in (3)
  • 1.299 in (4)
  • 1.575 in (6)
  • 1.969 in (3)
  • 2.362 in (3)
  • 4.724 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 15.0 mm (2)
  • 16.0 mm (1)
  • 17.0 mm (1)
  • 19.0 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (9)
  • 25.0 mm (3)
  • 33.0 mm (4)
  • 40.0 mm (6)
  • 50.0 mm (3)
  • 60.0 mm (3)
  • 120.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • H T (28)
  • H W (35)
Back-End
Shank Height
Shank Height
  • 0.748 in (2)
  • 1.024 in (16)
  • 1.26 in (16)
  • 2.066 in (1)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 19.0 mm (2)
  • 26.0 mm (16)
  • 32.0 mm (16)
  • 52.475 mm (1)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.07 in (3)
  • 0.072 in (5)
  • 0.095 in (7)
  • 0.134 in (2)
  • 0.174 in (2)
  • 0.213 in (2)
  • 0.276 in (1)
  • 0.313 in (13)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 1.776 mm (3)
  • 1.8 mm (5)
  • 2.401 mm (7)
  • 3.401 mm (2)
  • 4.4 mm (2)
  • 5.4 mm (2)
  • 7.0 mm (1)
  • 7.95 mm (13)
Shank Width Min to Shank Width Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?