Toolholders

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (189)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(189)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(189)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(189)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(189)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(189)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(189)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(189)
    • M Stainless Steel (189)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(189)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(189)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(189)
    • K Cast Iron (189)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(189)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(189)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(189)
    • N Non-Ferrous Materials (189)
      • N1
        Wrought Aluminum (189)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(189)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(90)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (189)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (189)
      • N6
        Carbon, Graphite Composites, CFRP (189)
      • N7
        MMC's (90)
    • S High-Temp Alloys (189)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(189)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(189)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(189)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(189)
    • H Hardened Materials (180)
      • H1
        Hardened Materials 44-48 HRC(180)
      • H2
        Hardened Materials 48-55 HRC(180)
      • H3
        Hardened Materials 56-60 HRC(120)
      • H4
        Hardened Materials >60 HRC(120)
    Select First Choice
    • BR (8)
    • CN (60)
    • DE (60)
    • GB (29)
    • IN (2)
    • SG (14)
    • US (97)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (69)
    • Cut-OffCut-Off (92)
    • Deep GroovingDeep Grooving (69)
    • FacingFacing (69)
    • GroovingGrooving (189)
    • Multiple Direction CuttingMultiple Direction Cutting (178)
    • ProfilingProfiling (189)
    • TurningTurning (189)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (189)
    • Lightly Interrupted Cut (189)
    • Smooth Cut (189)
    • Varying Depth of Cut (189)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (164)
    • 92.25 (25)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Toolholder (137)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (120)
    • 2.0 (189)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 4.5 in(23)
    • 4.921 in(54)
    • 4.933 in(5)
    • 5.0 in(18)
    • 5.906 in(32)
    • 5.917 in(4)
    • 6.0 in(42)
    • 6.694 in(10)
    • 7.0 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 114.301 mm(23)
    • 125.0 mm(54)
    • 125.301 mm(5)
    • 127.0 mm(18)
    • 150.0 mm(32)
    • 150.3 mm(4)
    • 152.4 mm(42)
    • 170.0 mm(10)
    • 177.8 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.006 in(9)
    • 0.008 in(108)
    • 0.016 in(136)
    • 0.031 in(100)
    • 0.034 in(28)
    • 0.039 in(44)
    • 0.041 in(44)
    • 0.047 in(46)
    • 0.048 in(12)
    • 0.06 in(36)
    • 0.063 in(36)
    • 0.079 in(28)
    • 0.08 in(28)
    • 0.094 in(28)
    • 0.098 in(26)
    • 0.099 in(26)
    • 0.119 in(30)
    • 0.12 in(30)
    • 0.125 in(30)
    • 0.156 in(12)
    • 0.157 in(12)
    • 0.158 in(12)
    • 0.187 in(4)
    • 0.188 in(4)
    • 0.197 in(4)
    • 0.198 in(4)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.151 mm(9)
    • 0.2 mm(108)
    • 0.4 mm(136)
    • 0.8 mm(100)
    • 0.851 mm(28)
    • 1.0 mm(44)
    • 1.05 mm(44)
    • 1.201 mm(46)
    • 1.225 mm(12)
    • 1.5 mm(36)
    • 1.526 mm(36)
    • 1.6 mm(36)
    • 2.0 mm(28)
    • 2.025 mm(28)
    • 2.375 mm(28)
    • 2.5 mm(26)
    • 2.526 mm(26)
    • 3.0 mm(30)
    • 3.026 mm(30)
    • 3.176 mm(30)
    • 3.975 mm(12)
    • 4.0 mm(12)
    • 4.025 mm(12)
    • 4.75 mm(4)
    • 4.775 mm(4)
    • 5.0 mm(4)
    • 5.025 mm(4)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K1025 (70)
    • K313 (180)
    • KB1630 (120)
    • KB5625 (120)
    • KBH20 (120)
    • KC5010 (180)
    • KC5025 (189)
    • KC9110 (180)
    • KC9125 (180)
    • KCK20 (136)
    • KCP10 (180)
    • KCP25 (180)
    • KCU10 (180)
    • KCU10B (180)
    • KCU25 (189)
    • KCU25B (189)
    • KD1405 (90)
    • KMS (62)
    • KT315 (164)
    • KU10 (180)
    • KU30T (120)
    • KY3500 (136)
    • KYS30 (68)
    • SP88F8 (30)
    Hand Of Tool
    Hand Of Tool
    • L (89)
    • R (100)
    F Dimension
    F Dimension
    • 12.101 mm(2)
    • 12.175 mm(2)
    • 12.226 mm(1)
    • 12.75 mm(2)
    • 12.8 mm(2)
    • 12.851 mm(2)
    • 15.925 mm(1)
    • 15.976 mm(4)
    • 16.026 mm(1)
    • 16.1 mm(1)
    • 16.2 mm(5)
    • 16.225 mm(2)
    • 19.026 mm(1)
    • 19.075 mm(8)
    • 19.1 mm(1)
    • 19.125 mm(6)
    • 19.225 mm(3)
    • 20.05 mm(6)
    • 20.1 mm(16)
    • 20.201 mm(15)
    • 20.3 mm(2)
    • 25.05 mm(4)
    • 25.1 mm(8)
    • 25.201 mm(10)
    • 25.3 mm(2)
    • 25.326 mm(2)
    • 25.425 mm(4)
    • 25.475 mm(7)
    • 25.5 mm(1)
    • 25.576 mm(3)
    • 25.701 mm(3)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.477 in(2)
    • 0.48 in(2)
    • 0.481 in(1)
    • 0.502 in(2)
    • 0.504 in(2)
    • 0.506 in(2)
    • 0.627 in(1)
    • 0.629 in(4)
    • 0.631 in(1)
    • 0.634 in(1)
    • 0.638 in(5)
    • 0.639 in(2)
    • 0.749 in(1)
    • 0.751 in(8)
    • 0.752 in(1)
    • 0.753 in(6)
    • 0.757 in(3)
    • 0.789 in(6)
    • 0.791 in(16)
    • 0.795 in(15)
    • 0.799 in(2)
    • 0.986 in(4)
    • 0.988 in(8)
    • 0.992 in(10)
    • 0.996 in(2)
    • 0.997 in(2)
    • 1.002 in(4)
    • 1.004 in(8)
    • 1.008 in(3)
    • 1.012 in(3)
    F Dimension MintoF Dimension Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 1.063 in(9)
    • 1.102 in(7)
    • 1.339 in(7)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 27.0 mm(9)
    • 28.0 mm(7)
    • 34.0 mm(7)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (18)
    • POSITIVE-ZERO (146)
    Front-End
    Cutting Width
    Cutting Width
    • 0.06 in(9)
    • 0.079 in(44)
    • 0.084 in(44)
    • 0.119 in(36)
    • 0.12 in(36)
    • 0.122 in(36)
    • 0.123 in(36)
    • 0.125 in(36)
    • 0.13 in(36)
    • 0.157 in(28)
    • 0.161 in(28)
    • 0.162 in(28)
    • 0.187 in(28)
    • 0.193 in(28)
    • 0.197 in(26)
    • 0.199 in(26)
    • 0.201 in(26)
    • 0.202 in(26)
    • 0.237 in(30)
    • 0.239 in(30)
    • 0.241 in(30)
    • 0.25 in(30)
    • 0.256 in(30)
    • 0.312 in(12)
    • 0.313 in(12)
    • 0.315 in(12)
    • 0.317 in(12)
    • 0.319 in(12)
    • 0.32 in(12)
    • 0.375 in(4)
    • 0.382 in(4)
    • 0.394 in(4)
    • 0.396 in(4)
    • 0.399 in(4)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 1.5 mm(9)
    • 2.0 mm(44)
    • 2.125 mm(44)
    • 3.0 mm(36)
    • 3.051 mm(36)
    • 3.1 mm(36)
    • 3.125 mm(36)
    • 3.176 mm(36)
    • 3.301 mm(36)
    • 4.0 mm(28)
    • 4.101 mm(28)
    • 4.125 mm(28)
    • 4.75 mm(28)
    • 4.9 mm(28)
    • 5.0 mm(26)
    • 5.051 mm(26)
    • 5.101 mm(26)
    • 5.125 mm(26)
    • 6.0 mm(30)
    • 6.051 mm(30)
    • 6.125 mm(30)
    • 6.351 mm(30)
    • 6.5 mm(30)
    • 7.926 mm(12)
    • 7.95 mm(12)
    • 8.0 mm(12)
    • 8.05 mm(12)
    • 8.1 mm(12)
    • 8.125 mm(12)
    • 9.525 mm(4)
    • 9.701 mm(4)
    • 10.0 mm(4)
    • 10.05 mm(4)
    • 10.125 mm(4)
    Cutting Width MintoCutting Width Max
    Insert Size
    Insert Size
    • 10 (4)
    • 2 (36)
    • 3 (30)
    • 4 (28)
    • 5 (26)
    • 6 (29)
    • 8 (13)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 in(29)
    • 0.315 in(10)
    • 0.394 in(6)
    • 0.531 in(9)
    • 0.551 in(35)
    • 0.572 in(4)
    • 0.669 in(41)
    • 0.69 in(3)
    • 0.748 in(6)
    • 0.787 in(22)
    • 0.866 in(4)
    • 0.946 in(8)
    • 1.024 in(12)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0 mm(29)
    • 8.0 mm(10)
    • 10.0 mm(6)
    • 13.5 mm(9)
    • 14.0 mm(35)
    • 14.5 mm(4)
    • 17.0 mm(41)
    • 17.5 mm(3)
    • 19.0 mm(6)
    • 20.0 mm(22)
    • 22.0 mm(4)
    • 24.0 mm(8)
    • 26.0 mm(12)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (120)
    • B L (120)
    • C N (136)
    • D P (90)
    • H T (164)
    • H W (189)
    Back-End
    Shank Height
    Shank Height
    • 0.473 in(5)
    • 0.5 in(6)
    • 0.625 in(9)
    • 0.63 in(9)
    • 0.75 in(27)
    • 0.787 in(45)
    • 0.984 in(36)
    • 1.0 in(32)
    • 1.25 in(9)
    • 1.26 in(10)
    • 1.5 in(1)
    Shank Height MintoShank Height Max
    Shank Height
    Shank Height
    • 12.0 mm(5)
    • 12.701 mm(6)
    • 15.875 mm(9)
    • 16.0 mm(9)
    • 19.05 mm(27)
    • 20.0 mm(45)
    • 25.0 mm(36)
    • 25.401 mm(32)
    • 31.75 mm(9)
    • 32.0 mm(10)
    • 38.1 mm(1)
    Shank Height MintoShank Height Max
    Shank Width
    Shank Width
    • 0.473 in(5)
    • 0.5 in(6)
    • 0.625 in(9)
    • 0.63 in(10)
    • 0.742 in(1)
    • 0.75 in(26)
    • 0.787 in(44)
    • 0.984 in(46)
    • 1.0 in(32)
    • 1.25 in(9)
    • 1.5 in(1)
    Shank Width MintoShank Width Max
    Shank Width
    Shank Width
    • 12.0 mm(5)
    • 12.701 mm(6)
    • 15.875 mm(9)
    • 16.0 mm(10)
    • 18.85 mm(1)
    • 19.05 mm(26)
    • 20.0 mm(44)
    • 25.0 mm(46)
    • 25.401 mm(32)
    • 31.75 mm(9)
    • 38.1 mm(1)
    Shank Width MintoShank Width Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?