Beyond Evolution Integral Holders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (320)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(320)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(320)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(320)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(320)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(320)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(320)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(320)
- M Stainless Steel (320)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(320)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(320)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(320)
- K Cast Iron (320)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(320)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(320)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(320)
- N Non-Ferrous Materials (320)
- N1Wrought Aluminum (320)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(320)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (320)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (320)
- N6Carbon, Graphite Composites, CFRP (320)
- S High-Temp Alloys (320)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(320)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(320)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(320)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(320)
- H Hardened Materials (296)
- H1Hardened Materials 44-48 HRC(296)
- H2Hardened Materials 48-55 HRC(296)
Select First Choice
- BR (8)
- CN (102)
- DE (102)
- GB (48)
- SG (24)
- US (173)
Applications
Applications
- Cut-Off (312)
- Deep Grooving (36)
- Facing (8)
- Grooving (220)
- Multiple Direction Cutting (76)
- Plunge Turning (76)
- Profiling (8)
- Turning (48)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (320)
- Lightly Interrupted Cut (320)
- Smooth Cut (320)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (8)
- 90.0 (312)
to
Over All Length [L]
Over All Length [L]
- 4.5 in(86)
- 4.921 in(88)
- 5.906 in(44)
- 6.0 in(68)
- 6.694 in(22)
- 7.0 in(6)
- 7.875 in(6)
to
Over All Length [L]
Over All Length [L]
- 114.301 mm(86)
- 125.0 mm(88)
- 150.0 mm(44)
- 152.4 mm(68)
- 170.0 mm(22)
- 177.8 mm(6)
- 200.0 mm(6)
to
Corner Radius
Corner Radius
- 0.0 in(24)
- 0.006 in(24)
- 0.008 in(228)
- 0.012 in(68)
- 0.016 in(192)
- 0.031 in(132)
- 0.039 in(72)
- 0.041 in(72)
- 0.046 in(16)
- 0.047 in(96)
- 0.06 in(60)
- 0.061 in(60)
- 0.063 in(60)
- 0.065 in(60)
- 0.079 in(48)
- 0.081 in(48)
- 0.094 in(48)
- 0.096 in(48)
- 0.098 in(36)
- 0.1 in(36)
- 0.119 in(32)
- 0.12 in(32)
- 0.125 in(32)
- 0.128 in(32)
- 0.156 in(16)
- 0.157 in(16)
- 0.158 in(16)
- 0.159 in(16)
to
Corner Radius
Corner Radius
- 0.0 mm(24)
- 0.151 mm(24)
- 0.2 mm(228)
- 0.301 mm(68)
- 0.4 mm(192)
- 0.8 mm(132)
- 1.0 mm(72)
- 1.05 mm(72)
- 1.175 mm(16)
- 1.201 mm(96)
- 1.5 mm(60)
- 1.55 mm(60)
- 1.6 mm(60)
- 1.651 mm(60)
- 2.0 mm(48)
- 2.051 mm(48)
- 2.375 mm(48)
- 2.45 mm(48)
- 2.5 mm(36)
- 2.551 mm(36)
- 3.0 mm(32)
- 3.051 mm(32)
- 3.176 mm(32)
- 3.25 mm(32)
- 3.95 mm(16)
- 4.0 mm(16)
- 4.025 mm(16)
- 4.05 mm(16)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (296)
- KCK20B (296)
- KCM35B (240)
- KCP10B (296)
- KCP25B (296)
- KCS10B (216)
- KCU10 (296)
- KCU10B (296)
- KCU25 (320)
- KCU25B (320)
Hand Of Tool
Hand Of Tool
- L (160)
- R (160)
F Dimension
F Dimension
- 9.525 mm(6)
- 10.0 mm(6)
- 12.0 mm(18)
- 12.025 mm(2)
- 12.101 mm(2)
- 12.15 mm(2)
- 12.701 mm(18)
- 12.726 mm(2)
- 12.8 mm(2)
- 12.851 mm(2)
- 15.875 mm(8)
- 15.976 mm(2)
- 16.0 mm(8)
- 16.026 mm(4)
- 16.1 mm(2)
- 16.151 mm(4)
- 19.05 mm(8)
- 19.075 mm(10)
- 19.125 mm(20)
- 19.225 mm(4)
- 20.0 mm(8)
- 20.05 mm(10)
- 20.1 mm(20)
- 20.201 mm(4)
- 25.05 mm(12)
- 25.1 mm(24)
- 25.201 mm(4)
- 25.35 mm(2)
- 25.425 mm(12)
- 25.475 mm(24)
- 25.576 mm(4)
- 25.701 mm(2)
- 26.0 mm(2)
- 31.0 mm(2)
- 31.5 mm(3)
- 31.75 mm(1)
- 31.826 mm(12)
- 31.925 mm(4)
- 32.051 mm(4)
- 32.075 mm(12)
- 32.176 mm(4)
- 32.301 mm(4)
- 32.4 mm(2)
- 32.65 mm(2)
- 38.275 mm(2)
- 38.401 mm(2)
- 38.75 mm(2)
- 40.176 mm(2)
- 40.301 mm(2)
- 40.651 mm(2)
to
F Dimension
F Dimension
- 0.375 in(6)
- 0.394 in(6)
- 0.473 in(18)
- 0.474 in(2)
- 0.477 in(2)
- 0.479 in(2)
- 0.5 in(18)
- 0.501 in(2)
- 0.504 in(2)
- 0.506 in(2)
- 0.625 in(8)
- 0.629 in(2)
- 0.63 in(8)
- 0.631 in(4)
- 0.634 in(2)
- 0.636 in(4)
- 0.75 in(8)
- 0.751 in(10)
- 0.753 in(20)
- 0.757 in(4)
- 0.787 in(8)
- 0.789 in(10)
- 0.791 in(20)
- 0.795 in(4)
- 0.986 in(12)
- 0.988 in(24)
- 0.992 in(4)
- 0.998 in(2)
- 1.002 in(12)
- 1.004 in(24)
- 1.008 in(4)
- 1.012 in(2)
- 1.024 in(2)
- 1.22 in(2)
- 1.24 in(3)
- 1.25 in(1)
- 1.254 in(12)
- 1.258 in(4)
- 1.262 in(4)
- 1.264 in(12)
- 1.268 in(4)
- 1.272 in(4)
- 1.276 in(2)
- 1.285 in(2)
- 1.508 in(2)
- 1.512 in(2)
- 1.526 in(2)
- 1.582 in(2)
- 1.587 in(2)
- 1.6 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.787 in(28)
- 1.024 in(8)
- 1.26 in(40)
- 1.655 in(24)
- 2.047 in(20)
- 2.441 in(29)
- 2.52 in(11)
- 3.228 in(4)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(28)
- 26.0 mm(8)
- 32.0 mm(40)
- 42.0 mm(24)
- 52.0 mm(20)
- 62.0 mm(29)
- 64.0 mm(11)
- 82.0 mm(4)
to
Cutting Direction
Cutting Direction
- B (8)
- E (312)
Rake Angle Style
Rake Angle Style
- POSITIVE-ZERO (40)
Front-End
Clamp Style
Clamp Style
- C (54)
- S (38)
- Y (228)
Cutting Width
Cutting Width
- 0.055 in(24)
- 0.063 in(24)
- 0.079 in(72)
- 0.084 in(72)
- 0.094 in(72)
- 0.095 in(72)
- 0.098 in(72)
- 0.119 in(60)
- 0.123 in(60)
- 0.125 in(60)
- 0.13 in(60)
- 0.157 in(48)
- 0.161 in(60)
- 0.162 in(48)
- 0.187 in(48)
- 0.188 in(48)
- 0.192 in(48)
- 0.197 in(36)
- 0.202 in(36)
- 0.237 in(32)
- 0.241 in(32)
- 0.25 in(32)
- 0.255 in(32)
- 0.276 in(32)
- 0.281 in(32)
- 0.289 in(32)
- 0.312 in(16)
- 0.315 in(16)
- 0.317 in(16)
- 0.32 in(16)
- 0.375 in(8)
- 0.38 in(8)
- 0.394 in(8)
- 0.399 in(8)
to
Cutting Width
Cutting Width
- 1.401 mm(24)
- 1.6 mm(24)
- 2.0 mm(72)
- 2.125 mm(72)
- 2.375 mm(72)
- 2.401 mm(72)
- 2.5 mm(72)
- 3.0 mm(60)
- 3.125 mm(60)
- 3.176 mm(60)
- 3.301 mm(60)
- 4.0 mm(48)
- 4.101 mm(60)
- 4.125 mm(48)
- 4.75 mm(48)
- 4.775 mm(48)
- 4.875 mm(48)
- 5.0 mm(36)
- 5.125 mm(36)
- 6.0 mm(32)
- 6.125 mm(32)
- 6.351 mm(32)
- 6.476 mm(32)
- 7.0 mm(32)
- 7.125 mm(32)
- 7.325 mm(32)
- 7.926 mm(16)
- 8.0 mm(16)
- 8.05 mm(16)
- 8.125 mm(16)
- 9.525 mm(8)
- 9.65 mm(8)
- 10.0 mm(8)
- 10.125 mm(8)
to
Insert Size
Insert Size
- 10 (8)
- 2 (48)
- 3 (40)
- 4 (48)
- 5 (36)
- 6 (32)
- 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.394 in(28)
- 0.512 in(8)
- 0.63 in(136)
- 0.866 in(24)
- 1.024 in(68)
- 1.26 in(32)
- 1.575 in(16)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 10.0 mm(28)
- 13.0 mm(8)
- 16.0 mm(136)
- 22.0 mm(24)
- 26.0 mm(68)
- 32.0 mm(32)
- 40.0 mm(16)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B L (288)
- H W (320)
Back-End
Shank Height
Shank Height
- 0.375 in(6)
- 0.394 in(6)
- 0.473 in(24)
- 0.5 in(24)
- 0.625 in(14)
- 0.63 in(14)
- 0.75 in(42)
- 0.787 in(44)
- 0.984 in(44)
- 1.0 in(46)
- 1.25 in(22)
- 1.26 in(22)
- 1.5 in(6)
- 1.575 in(6)
to
Shank Height
Shank Height
- 9.525 mm(6)
- 10.0 mm(6)
- 12.0 mm(24)
- 12.701 mm(24)
- 15.875 mm(14)
- 16.0 mm(14)
- 19.05 mm(42)
- 20.0 mm(44)
- 25.0 mm(44)
- 25.401 mm(46)
- 31.75 mm(22)
- 32.0 mm(22)
- 38.1 mm(6)
- 40.0 mm(6)
to
Shank Width
Shank Width
- 0.375 in(6)
- 0.394 in(6)
- 0.473 in(24)
- 0.5 in(24)
- 0.625 in(14)
- 0.63 in(14)
- 0.75 in(42)
- 0.787 in(44)
- 0.984 in(44)
- 1.0 in(46)
- 1.25 in(22)
- 1.26 in(22)
- 1.5 in(6)
- 1.575 in(6)
to
Shank Width
Shank Width
- 9.525 mm(6)
- 10.0 mm(6)
- 12.0 mm(24)
- 12.701 mm(24)
- 15.875 mm(14)
- 16.0 mm(14)
- 19.05 mm(42)
- 20.0 mm(44)
- 25.0 mm(44)
- 25.401 mm(46)
- 31.75 mm(22)
- 32.0 mm(22)
- 38.1 mm(6)
- 40.0 mm(6)
to
No filters matching ""