Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

Beyond Evolution

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (823)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (823)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (823)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (823)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (823)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (823)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (823)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (823)
  • M Stainless Steel (662)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (662)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (662)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (662)
  • K Cast Iron (823)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (823)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (823)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (823)
  • N Non-Ferrous Materials (691)
    • N1
      Wrought Aluminum
      (691)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (662)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (691)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (662)
    • N6
      Carbon, Graphite Composites, CFRP
      (662)
  • S High-Temp Alloys (691)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (691)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (691)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (691)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (691)
  • H Hardened Materials (529)
    • H1
      Hardened Materials 44-48 HRC
      (529)
    • H2
      Hardened Materials 48-55 HRC
      (529)
Select First Choice
  • BR (14)
  • CN (180)
  • DE (190)
  • GB (94)
  • IN (20)
  • SG (72)
  • US (250)
Applications
Applications
  • Back Boring Back Boring (143)
  • CRT Profiling CRT Profiling (2)
  • Cut-Off Cut-Off (436)
  • Deep Grooving Deep Grooving (38)
  • Face Grooving Face Grooving (300)
  • Facing Facing (279)
  • Grooving Grooving (671)
  • ID Facing ID Facing (268)
  • ID Grooving ID Grooving (364)
  • Multiple Direction Cutting Multiple Direction Cutting (91)
  • Plunge Turning Plunge Turning (384)
  • Profiling Profiling (112)
  • Turning Turning (319)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (625)
  • Lightly Interrupted Cut (721)
  • Smooth Cut (852)
  • Varying Depth of Cut (721)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (8)
  • 90.0 (441)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (52)
  • Cutoff Support Blade A1-A3 (43)
  • Toolholder (320)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (818)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (26)
  • 0.006 in (26)
  • 0.008 in (398)
  • 0.012 in (87)
  • 0.016 in (364)
  • 0.031 in (263)
  • 0.039 in (104)
  • 0.041 in (109)
  • 0.046 in (22)
  • 0.047 in (171)
  • 0.06 in (95)
  • 0.061 in (101)
  • 0.063 in (98)
  • 0.065 in (99)
  • 0.079 in (76)
  • 0.081 in (82)
  • 0.094 in (79)
  • 0.096 in (81)
  • 0.098 in (50)
  • 0.1 in (56)
  • 0.119 in (43)
  • 0.12 in (49)
  • 0.125 in (48)
  • 0.128 in (45)
  • 0.156 in (27)
  • 0.157 in (23)
  • 0.158 in (25)
  • 0.159 in (29)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (26)
  • 0.151 mm (26)
  • 0.2 mm (398)
  • 0.301 mm (87)
  • 0.4 mm (364)
  • 0.8 mm (263)
  • 1.0 mm (104)
  • 1.05 mm (109)
  • 1.175 mm (22)
  • 1.201 mm (171)
  • 1.5 mm (95)
  • 1.55 mm (101)
  • 1.6 mm (98)
  • 1.651 mm (99)
  • 2.0 mm (76)
  • 2.051 mm (82)
  • 2.375 mm (79)
  • 2.45 mm (81)
  • 2.5 mm (50)
  • 2.551 mm (56)
  • 3.0 mm (43)
  • 3.051 mm (49)
  • 3.176 mm (48)
  • 3.25 mm (45)
  • 3.95 mm (27)
  • 4.0 mm (23)
  • 4.025 mm (25)
  • 4.05 mm (29)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (437)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (437)
Corner Chamfer Min to Corner Chamfer Max
Application
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (176)
  • Lightly Interrupted Cut (272)
  • Smooth Cut (403)
  • Varying Depth of Cut (272)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (452)
  • KCK20B (458)
  • KCM35B (340)
  • KCP10B (481)
  • KCP25B (491)
  • KCU10 (529)
  • KCU25 (556)
Hand Of Tool
Hand Of Tool
  • L (194)
  • N (24)
  • N - Neutral (3)
  • R (194)
Wiper Insert
Wiper Insert
  • N (818)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 20.0 mm (12)
  • 25.0 mm (10)
  • 25.401 mm (2)
  • 31.75 mm (6)
  • 32.0 mm (6)
  • 38.1 mm (4)
  • 40.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.787 in (12)
  • 0.984 in (10)
  • 1.0 in (2)
  • 1.25 in (6)
  • 1.26 in (6)
  • 1.5 in (4)
  • 1.575 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (28)
  • 1.024 in (8)
  • 1.26 in (40)
  • 1.655 in (24)
  • 2.047 in (24)
  • 2.441 in (29)
  • 2.52 in (11)
  • 2.598 in (8)
  • 3.15 in (4)
  • 3.228 in (4)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (28)
  • 26.0 mm (8)
  • 32.0 mm (40)
  • 42.0 mm (24)
  • 52.0 mm (24)
  • 62.0 mm (29)
  • 64.0 mm (11)
  • 66.0 mm (8)
  • 80.0 mm (4)
  • 82.0 mm (4)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (376)
  • S (31)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (34)
  • NEUTRAL (ZERO) (18)
  • POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
  • 0.946 in (4)
  • 1.0 in (4)
  • 1.25 in (6)
  • 1.26 in (4)
  • 1.5 in (6)
  • 1.575 in (4)
  • 1.586 in (2)
  • 1.587 in (2)
  • 1.969 in (2)
  • 1.98 in (4)
  • 2.0 in (7)
  • 2.496 in (2)
  • 2.5 in (1)
  • 2.52 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (4)
  • 25.401 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (4)
  • 38.1 mm (6)
  • 40.0 mm (4)
  • 40.276 mm (2)
  • 40.301 mm (2)
  • 50.0 mm (2)
  • 50.301 mm (4)
  • 50.801 mm (7)
  • 63.401 mm (2)
  • 63.5 mm (1)
  • 64.0 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (28)
Front-End
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (76)
  • SQUARE SHANK ADAPTER (20)
Clamp Style
Clamp Style
  • C (54)
  • S (38)
  • Y (337)
Cutting Width
Cutting Width
  • 0.055 in (26)
  • 0.063 in (49)
  • 0.079 in (107)
  • 0.084 in (118)
  • 0.094 in (107)
  • 0.095 in (110)
  • 0.098 in (110)
  • 0.119 in (101)
  • 0.123 in (117)
  • 0.125 in (114)
  • 0.13 in (117)
  • 0.157 in (82)
  • 0.161 in (92)
  • 0.162 in (100)
  • 0.187 in (93)
  • 0.188 in (73)
  • 0.192 in (98)
  • 0.197 in (56)
  • 0.202 in (74)
  • 0.237 in (49)
  • 0.241 in (65)
  • 0.25 in (63)
  • 0.255 in (57)
  • 0.276 in (43)
  • 0.281 in (44)
  • 0.289 in (40)
  • 0.312 in (33)
  • 0.315 in (29)
  • 0.317 in (32)
  • 0.32 in (45)
  • 0.375 in (12)
  • 0.38 in (8)
  • 0.394 in (11)
  • 0.399 in (16)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.401 mm (26)
  • 1.6 mm (49)
  • 2.0 mm (107)
  • 2.125 mm (118)
  • 2.375 mm (107)
  • 2.401 mm (110)
  • 2.5 mm (110)
  • 3.0 mm (101)
  • 3.125 mm (117)
  • 3.176 mm (114)
  • 3.301 mm (117)
  • 4.0 mm (82)
  • 4.101 mm (92)
  • 4.125 mm (100)
  • 4.75 mm (93)
  • 4.775 mm (73)
  • 4.875 mm (98)
  • 5.0 mm (56)
  • 5.125 mm (74)
  • 6.0 mm (49)
  • 6.125 mm (65)
  • 6.351 mm (63)
  • 6.476 mm (57)
  • 7.0 mm (43)
  • 7.125 mm (44)
  • 7.325 mm (40)
  • 7.926 mm (33)
  • 8.0 mm (29)
  • 8.05 mm (32)
  • 8.125 mm (45)
  • 9.525 mm (12)
  • 9.65 mm (8)
  • 10.0 mm (11)
  • 10.125 mm (16)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (76)
  • VKT - Square Shank (20)
Insert Shape
Insert Shape
  • PRISMATIC (852)
Cartridge Size
Cartridge Size
  • 50 (28)
  • 65 (6)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (76)
  • VKT01 Std Design (20)
Insert Size
Insert Size
  • 10 (8)
  • 1F (12)
  • 2 (64)
  • 3 (56)
  • 4 (56)
  • 5 (36)
  • 6 (32)
  • 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.197 in (8)
  • 0.276 in (24)
  • 0.394 in (40)
  • 0.433 in (1)
  • 0.473 in (18)
  • 0.512 in (8)
  • 0.551 in (2)
  • 0.591 in (1)
  • 0.63 in (150)
  • 0.669 in (1)
  • 0.787 in (1)
  • 0.866 in (26)
  • 1.024 in (78)
  • 1.26 in (36)
  • 1.299 in (10)
  • 1.575 in (24)
  • 1.969 in (2)
  • 2.362 in (5)
  • 4.724 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.0 mm (8)
  • 7.0 mm (24)
  • 10.0 mm (40)
  • 11.0 mm (1)
  • 12.0 mm (18)
  • 13.0 mm (8)
  • 14.0 mm (2)
  • 15.0 mm (1)
  • 16.0 mm (150)
  • 17.0 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (26)
  • 26.0 mm (78)
  • 32.0 mm (36)
  • 33.0 mm (10)
  • 40.0 mm (24)
  • 50.0 mm (2)
  • 60.0 mm (5)
  • 120.0 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (4)
  • 7 in (2)
  • 0.866 in (12)
  • 1.102 in (2)
  • 1.299 in (2)
  • 1.496 in (2)
  • 1.693 in (2)
  • 1.85 in (6)
  • 1.891 in (6)
  • 1.929 in (4)
  • 2.106 in (4)
  • 2.185 in (2)
  • 2.244 in (6)
  • 2.283 in (6)
  • 2.303 in (6)
  • 2.382 in (2)
  • 2.5 in (12)
  • 2.579 in (2)
  • 2.618 in (4)
  • 2.697 in (4)
  • 2.894 in (4)
  • 5.439 in (2)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (6)
  • 5.533 in (4)
  • 5.906 in (2)
  • 6.226 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.534 in (2)
  • 6.694 in (2)
Gage Length
Gage Length
  • 22 mm (12)
  • 47 mm (6)
  • 48 mm (6)
  • 57 mm (6)
  • 58 mm (6)
  • 49 mm (4)
  • 150 mm (2)
  • 170 mm (2)
  • 28 mm (2)
  • 33 mm (2)
  • 38 mm (2)
  • 43 mm (2)
  • 53.5 mm (4)
  • 55.5 mm (2)
  • 58.5 mm (6)
  • 60.5 mm (2)
  • 63.5 mm (12)
  • 65.5 mm (2)
  • 66.5 mm (4)
  • 68.5 mm (4)
  • 73.5 mm (4)
  • 138.15 mm (2)
  • 138.75 mm (2)
  • 139.25 mm (2)
  • 139.9 mm (6)
  • 140.4 mm (6)
  • 140.55 mm (4)
  • 152.4 mm (4)
  • 158.15 mm (2)
  • 158.75 mm (2)
  • 159.25 mm (2)
  • 165.951 mm (2)
  • 177.8 mm (2)
Insert Geometry
Shape
Shape
  • PRISMATIC (403)
Insert Seat Size
Insert Seat Size
  • 10 (15)
  • 1F (8)
  • 2 (42)
  • 3 (81)
  • 4 (81)
  • 5 (36)
  • 6 (81)
  • 8 (59)
Cutting Tool Material
Cutting Tool Material
  • H W (852)
Back-End
Connection Type
Connection Type
  • BORING BAR (52)
  • CUTOFF BLADE (40)
  • Cutoff Blade (3)
  • SQUARE SHANK (320)
System Size
System Size
  • KM40TS (4)
  • KM4X63 (4)
  • KM50TS (8)
  • KM63TS (8)
  • KM63XMZ (8)
  • KM80ATC (8)
  • KM80TS (8)
  • PSC40 (4)
  • PSC50 (8)
  • PSC63 (8)
  • PSC80 (8)
  • VDI30 (10)
  • VDI40 (10)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (4)
  • 12.701 mm (4)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 19.05 mm (6)
  • 20.0 mm (6)
  • 25.0 mm (6)
  • 25.401 mm (6)
  • 31.701 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.75 in (6)
  • 0.787 in (6)
  • 0.984 in (6)
  • 1.0 in (6)
  • 1.248 in (1)
  • 1.25 in (3)
  • 1.26 in (4)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Grooving and Cut-Off

Grooving, and Cut-Off • Square Shank
(38 Products)
  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving
  • Cut-OffCut-Off
  • Through Coolant: GroovingThrough Coolant: Grooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [H1] Cutting Height [H1] Cutting Height [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [FS] Secondary F Dimension [FS] Secondary F Dimension [LH] Head Length [LH] Head Length [CS] Coolant Supply Size Clamp Screw ID Drive Size
6179928 EVSCFL1212K0310C EVSCFL1212K0310C   3 10.0000 .3940 20.0000 .7870 12.0000 .4720 12.0000 .4720 12.0000 .4720 16.7500 .6590 125.0000 4.921 10.5000 .4130 21.5000 .8460 M8X1 T15
    List price:
    $180.41 /each.
    Your price::
    6179932 EVSCFL1616K0216 EVSCFL1616K0216   2 16.0000 .6300 32.0000 1.260 16.0000 .6300 16.0000 .6300 16.0000 .6300 20.5000 .8070 125.0000 4.921 15.0000 .5910 26.5000 1.043   T20
      List price:
      $128.85 /each.
      Your price::
      6179933 EVSCFL1616K0316C EVSCFL1616K0316C   3 16.0000 .6300 32.0000 1.260 16.0000 .6300 16.0000 .6300 16.0000 .6300 20.7500 .8170 125.0000 4.921 14.5000 .5710 27.5000 1.083 M8X1 T20
        List price:
        $180.41 /each.
        Your price::
        6179936 EVSCFL2020K0216 EVSCFL2020K0216   2 16.0000 .6300 32.0000 1.260 20.0000 .7870 20.0000 .7870 20.0000 .7870 24.5000 .9650 125.0000 4.921 19.0000 .7480 26.5000 1.043   T20
          List price:
          $143.18 /each.
          Your price::
          6179766 EVSCFR1212K1B10 EVSCFR1212K1B10   1B 10.0000 .3940 20.0000 .7870 12.0000 .4720 12.0000 .4720 12.0000 .4720 16.0000 .6300 125.0000 4.921 11.3000 .4450 20.5000 .8070   T15
            List price:
            $128.85 /each.
            Your price::
            6179767 EVSCFR1212K1B13 EVSCFR1212K1B13   1B 13.0000 .5120 26.0000 1.024 12.0000 .4720 12.0000 .4720 12.0000 .4720 16.0000 .6300 125.0000 4.921 11.3000 .4450 23.5000 .9250   T15
              List price:
              $128.85 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance

              ORIGINAL PRODUCT

              Grooving and Cut-Off

              Grooving, and Cut-Off • Blades with and without reinforcement
              (10 Products)
              • Through Coolant: GroovingThrough Coolant: Grooving
              • Cut-OffCut-Off
              • O.D. Deep GroovingO.D. Deep Grooving
              • GroovingGrooving
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [H] Shank Height [H] Shank Height [W1] Blade Width [W1] Blade Width [H1] Cutting Height [H1] Cutting Height [L1] Tool Length [L1] Tool Length [B] Shank Width [B] Shank Width [CD] Cutting Depth [CD] Cutting Depth
              6513521 EVBSN26J0340C EVBSN26J0340C   3 26.0000 1.022     21.4500 .8445 110.2500 4.340 2.4000 .0945 40.0000 1.574
                List price:
                $187.96 /each.
                Your price::
                6513524 EVBSN26J0440C EVBSN26J0440C   4 26.0000 1.022     21.4500 .8445 110.2510 4.340 3.4000 .1339 40.0000 1.500
                  List price:
                  $187.96 /each.
                  Your price::
                  6513525 EVBSN26M0440C EVBSN26M0440C   4 26.0000 1.022     21.4500 .8445 150.2510 5.915 3.4000 .1339 40.0000 1.500
                    List price:
                    $191.72 /each.
                    Your price::
                    6513450 EVBSN32M0233C EVBSN32M0233C   2 32.0000 1.258 1.6500 .0650 25.0500 .9862 150.2500 5.915 2.4000 .0945 33.0000 1.299
                      List price:
                      $206.74 /each.
                      Your price::
                      6513526 EVBSN32M0450C EVBSN32M0450C   4 32.0000 1.258     25.0500 .9862 150.2510 5.915 3.4000 .1339 50.0000 1.968
                        List price:
                        $206.74 /each.
                        Your price::
                        6513529 EVBSN32M0660C EVBSN32M0660C   6 32.0000 1.258     25.0500 .9862