Beyond Evolution Integral Holders

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (320)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (320)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (320)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (320)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (320)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (320)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (320)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (320)
  • M Stainless Steel (320)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (320)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (320)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (320)
  • K Cast Iron (320)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (320)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (320)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (320)
  • N Non-Ferrous Materials (320)
    • N1
      Wrought Aluminum (320)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (320)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (320)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (320)
    • N6
      Carbon, Graphite Composites, CFRP (320)
  • S High-Temp Alloys (320)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (320)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (320)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (320)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (320)
  • H Hardened Materials (296)
    • H1
      Hardened Materials 44-48 HRC (296)
    • H2
      Hardened Materials 48-55 HRC (296)
Select First Choice
  • BR (8)
  • CN (102)
  • DE (102)
  • GB (48)
  • SG (24)
  • US (173)
Applications
Applications
  • Cut-Off Cut-Off (312)
  • Deep Grooving Deep Grooving (36)
  • Facing Facing (8)
  • Grooving Grooving (220)
  • Multiple Direction Cutting Multiple Direction Cutting (76)
  • Plunge Turning Plunge Turning (76)
  • Profiling Profiling (8)
  • Turning Turning (48)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (320)
  • Lightly Interrupted Cut (320)
  • Smooth Cut (320)
  • Varying Depth of Cut (320)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (8)
  • 90.0 (312)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 4.5 in (86)
  • 4.921 in (88)
  • 5.906 in (44)
  • 6.0 in (68)
  • 6.694 in (22)
  • 7.0 in (6)
  • 7.875 in (6)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 114.301 mm (86)
  • 125.0 mm (88)
  • 150.0 mm (44)
  • 152.4 mm (68)
  • 170.0 mm (22)
  • 177.8 mm (6)
  • 200.0 mm (6)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (24)
  • 0.006 in (24)
  • 0.008 in (228)
  • 0.012 in (68)
  • 0.016 in (192)
  • 0.031 in (132)
  • 0.039 in (72)
  • 0.041 in (72)
  • 0.046 in (16)
  • 0.047 in (96)
  • 0.06 in (60)
  • 0.061 in (60)
  • 0.063 in (60)
  • 0.065 in (60)
  • 0.079 in (48)
  • 0.081 in (48)
  • 0.094 in (48)
  • 0.096 in (48)
  • 0.098 in (36)
  • 0.1 in (36)
  • 0.119 in (32)
  • 0.12 in (32)
  • 0.125 in (32)
  • 0.128 in (32)
  • 0.156 in (16)
  • 0.157 in (16)
  • 0.158 in (16)
  • 0.159 in (16)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (24)
  • 0.151 mm (24)
  • 0.2 mm (228)
  • 0.301 mm (68)
  • 0.4 mm (192)
  • 0.8 mm (132)
  • 1.0 mm (72)
  • 1.05 mm (72)
  • 1.175 mm (16)
  • 1.201 mm (96)
  • 1.5 mm (60)
  • 1.55 mm (60)
  • 1.6 mm (60)
  • 1.651 mm (60)
  • 2.0 mm (48)
  • 2.051 mm (48)
  • 2.375 mm (48)
  • 2.45 mm (48)
  • 2.5 mm (36)
  • 2.551 mm (36)
  • 3.0 mm (32)
  • 3.051 mm (32)
  • 3.176 mm (32)
  • 3.25 mm (32)
  • 3.95 mm (16)
  • 4.0 mm (16)
  • 4.025 mm (16)
  • 4.05 mm (16)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (296)
  • KCK20B (296)
  • KCM35B (240)
  • KCP10B (296)
  • KCP25B (296)
  • KCU10 (296)
  • KCU10B (296)
  • KCU25 (320)
  • KCU25B (320)
Hand Of Tool
Hand Of Tool
  • L (160)
  • R (160)
F Dimension
F Dimension
  • 9.525 mm (6)
  • 10.0 mm (6)
  • 12.0 mm (18)
  • 12.025 mm (2)
  • 12.101 mm (2)
  • 12.15 mm (2)
  • 12.701 mm (18)
  • 12.726 mm (2)
  • 12.8 mm (2)
  • 12.851 mm (2)
  • 15.875 mm (8)
  • 15.976 mm (2)
  • 16.0 mm (8)
  • 16.026 mm (4)
  • 16.1 mm (2)
  • 16.151 mm (4)
  • 19.05 mm (8)
  • 19.075 mm (10)
  • 19.125 mm (20)
  • 19.225 mm (4)
  • 20.0 mm (8)
  • 20.05 mm (10)
  • 20.1 mm (20)
  • 20.201 mm (4)
  • 25.05 mm (12)
  • 25.1 mm (24)
  • 25.201 mm (4)
  • 25.35 mm (2)
  • 25.425 mm (12)
  • 25.475 mm (24)
  • 25.576 mm (4)
  • 25.701 mm (2)
  • 26.0 mm (2)
  • 31.0 mm (2)
  • 31.5 mm (3)
  • 31.75 mm (1)
  • 31.826 mm (12)
  • 31.925 mm (4)
  • 32.051 mm (4)
  • 32.075 mm (12)
  • 32.176 mm (4)
  • 32.301 mm (4)
  • 32.4 mm (2)
  • 32.65 mm (2)
  • 38.275 mm (2)
  • 38.401 mm (2)
  • 38.75 mm (2)
  • 40.176 mm (2)
  • 40.301 mm (2)
  • 40.651 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.375 in (6)
  • 0.394 in (6)
  • 0.473 in (18)
  • 0.474 in (2)
  • 0.477 in (2)
  • 0.479 in (2)
  • 0.5 in (18)
  • 0.501 in (2)
  • 0.504 in (2)
  • 0.506 in (2)
  • 0.625 in (8)
  • 0.629 in (2)
  • 0.63 in (8)
  • 0.631 in (4)
  • 0.634 in (2)
  • 0.636 in (4)
  • 0.75 in (8)
  • 0.751 in (10)
  • 0.753 in (20)
  • 0.757 in (4)
  • 0.787 in (8)
  • 0.789 in (10)
  • 0.791 in (20)
  • 0.795 in (4)
  • 0.986 in (12)
  • 0.988 in (24)
  • 0.992 in (4)
  • 0.998 in (2)
  • 1.002 in (12)
  • 1.004 in (24)
  • 1.008 in (4)
  • 1.012 in (2)
  • 1.024 in (2)
  • 1.22 in (2)
  • 1.24 in (3)
  • 1.25 in (1)
  • 1.254 in (12)
  • 1.258 in (4)
  • 1.262 in (4)
  • 1.264 in (12)
  • 1.268 in (4)
  • 1.272 in (4)
  • 1.276 in (2)
  • 1.285 in (2)
  • 1.508 in (2)
  • 1.512 in (2)
  • 1.526 in (2)
  • 1.582 in (2)
  • 1.587 in (2)
  • 1.6 in (2)
F Dimension Min to F Dimension Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 0.787 in (28)
  • 1.024 in (8)
  • 1.26 in (40)
  • 1.655 in (24)
  • 2.047 in (20)
  • 2.441 in (29)
  • 2.52 in (11)
  • 3.228 in (4)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 20.0 mm (28)
  • 26.0 mm (8)
  • 32.0 mm (40)
  • 42.0 mm (24)
  • 52.0 mm (20)
  • 62.0 mm (29)
  • 64.0 mm (11)
  • 82.0 mm (4)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (312)
Rake Angle Style
Rake Angle Style
  • POSITIVE-ZERO (40)
Front-End
Clamp Style
Clamp Style
  • C (54)
  • S (38)
  • Y (228)
Cutting Width
Cutting Width
  • 0.055 in (24)
  • 0.063 in (24)
  • 0.079 in (72)
  • 0.084 in (72)
  • 0.094 in (72)
  • 0.095 in (72)
  • 0.098 in (72)
  • 0.119 in (60)
  • 0.123 in (60)
  • 0.125 in (60)
  • 0.13 in (60)
  • 0.157 in (48)
  • 0.161 in (60)
  • 0.162 in (48)
  • 0.187 in (48)
  • 0.188 in (48)
  • 0.192 in (48)
  • 0.197 in (36)
  • 0.202 in (36)
  • 0.237 in (32)
  • 0.241 in (32)
  • 0.25 in (32)
  • 0.255 in (32)
  • 0.276 in (32)
  • 0.281 in (32)
  • 0.289 in (32)
  • 0.312 in (16)
  • 0.315 in (16)
  • 0.317 in (16)
  • 0.32 in (16)
  • 0.375 in (8)
  • 0.38 in (8)
  • 0.394 in (8)
  • 0.399 in (8)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.401 mm (24)
  • 1.6 mm (24)
  • 2.0 mm (72)
  • 2.125 mm (72)
  • 2.375 mm (72)
  • 2.401 mm (72)
  • 2.5 mm (72)
  • 3.0 mm (60)
  • 3.125 mm (60)
  • 3.176 mm (60)
  • 3.301 mm (60)
  • 4.0 mm (48)
  • 4.101 mm (60)
  • 4.125 mm (48)
  • 4.75 mm (48)
  • 4.775 mm (48)
  • 4.875 mm (48)
  • 5.0 mm (36)
  • 5.125 mm (36)
  • 6.0 mm (32)
  • 6.125 mm (32)
  • 6.351 mm (32)
  • 6.476 mm (32)
  • 7.0 mm (32)
  • 7.125 mm (32)
  • 7.325 mm (32)
  • 7.926 mm (16)
  • 8.0 mm (16)
  • 8.05 mm (16)
  • 8.125 mm (16)
  • 9.525 mm (8)
  • 9.65 mm (8)
  • 10.0 mm (8)
  • 10.125 mm (8)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 10 (8)
  • 2 (48)
  • 3 (40)
  • 4 (48)
  • 5 (36)
  • 6 (32)
  • 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.394 in (28)
  • 0.512 in (8)
  • 0.63 in (136)
  • 0.866 in (24)
  • 1.024 in (68)
  • 1.26 in (32)
  • 1.575 in (16)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 10.0 mm (28)
  • 13.0 mm (8)
  • 16.0 mm (136)
  • 22.0 mm (24)
  • 26.0 mm (68)
  • 32.0 mm (32)
  • 40.0 mm (16)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Back-End
Shank Height
Shank Height
  • 0.375 in (6)
  • 0.394 in (6)
  • 0.473 in (24)
  • 0.5 in (24)
  • 0.625 in (14)
  • 0.63 in (14)
  • 0.75 in (42)
  • 0.787 in (44)
  • 0.984 in (44)
  • 1.0 in (46)
  • 1.25 in (22)
  • 1.26 in (22)
  • 1.5 in (6)
  • 1.575 in (6)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 9.525 mm (6)
  • 10.0 mm (6)
  • 12.0 mm (24)
  • 12.701 mm (24)
  • 15.875 mm (14)
  • 16.0 mm (14)
  • 19.05 mm (42)
  • 20.0 mm (44)
  • 25.0 mm (44)
  • 25.401 mm (46)
  • 31.75 mm (22)
  • 32.0 mm (22)
  • 38.1 mm (6)
  • 40.0 mm (6)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.375 in (6)
  • 0.394 in (6)
  • 0.473 in (24)
  • 0.5 in (24)
  • 0.625 in (14)
  • 0.63 in (14)
  • 0.75 in (42)
  • 0.787 in (44)
  • 0.984 in (44)
  • 1.0 in (46)
  • 1.25 in (22)
  • 1.26 in (22)
  • 1.5 in (6)
  • 1.575 in (6)
Shank Width Min