Fix-Perfect™

If you are looking for world-class metalworking solutions that boost productivity and consistency, there is no substitute for Kennametal Fix Perfect tools. These tools feature state-of-the-art design, durable construction, and strong materials, helping you achieve success through all applications. Fix-Perfect is also optimal for producing true I.D. and O.D. cuts.

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (15)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(15)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(15)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(15)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(15)
    • M Stainless Steel (10)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(10)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(10)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(10)
    • K Cast Iron (15)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(15)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(15)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(15)
    • N Non-Ferrous Materials (7)
      • N1
        Wrought Aluminum (7)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(7)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (7)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (7)
      • N6
        Carbon, Graphite Composites, CFRP (7)
      • N7
        MMC's (7)
    • S High-Temp Alloys (10)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(10)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(10)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(10)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(10)
    • H Hardened Materials (4)
      • H1
        Hardened Materials 44-48 HRC(4)
      • H2
        Hardened Materials 48-55 HRC(4)
      • H3
        Hardened Materials 56-60 HRC(3)
    • C CFRP Materials (7)
      • C1
        CFRP, CFRP / CFRP (7)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (7)
    Applications
    Applications
    • FacingFacing (15)
    • Multiple Direction CuttingMultiple Direction Cutting (15)
    • ProfilingProfiling (6)
    • TurningTurning (15)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (12)
    • Lightly Interrupted Cut (15)
    • Smooth Cut (15)
    • Varying Depth of Cut (15)
    Over All Length [L]
    Over All Length [L]
    • 5.906 in(6)
    • 6.694 in(6)
    • 9.843 in(3)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 150.0 mm(6)
    • 170.0 mm(6)
    • 250.0 mm(3)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.157 in(1)
    • 0.197 in(2)
    • 0.237 in(3)
    • 0.313 in(3)
    • 0.315 in(3)
    • 0.394 in(3)
    • 0.492 in(3)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 4.0 mm(1)
    • 5.0 mm(2)
    • 6.0 mm(3)
    • 7.95 mm(3)
    • 8.0 mm(3)
    • 10.0 mm(3)
    • 12.5 mm(3)
    Corner Radius MintoCorner Radius Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (8)
    • AC5 (6)
    • CG4 (3)
    • CL4 (5)
    • CM3 (12)
    • CM5 (11)
    • CPX (6)
    • GX (3)
    • K313 (7)
    • K420 (5)
    • K68 (7)
    • KC5010 (10)
    • KC5025 (7)
    • KC5410 (4)
    • KC730 (7)
    • KC732 (4)
    • KC8050 (12)
    • KC810 (1)
    • KC850 (7)
    • KC910 (4)
    • KC9110 (14)
    • KC9125 (14)
    • KC9240 (9)
    • KC9240NEW (9)
    • KC9315 (12)
    • KC9320 (3)
    • KCD25 (1)
    • KCK15 (6)
    • KCK15B (9)
    • KCK20 (7)
    • KCK20B (7)
    • KCM25 (7)
    • KCM25B (3)
    • KCP10 (13)
    • KCP10B (13)
    • KCP25 (14)
    • KCP25B (15)
    • KCP25C (15)
    • KCP30 (11)
    • KCP30B (7)
    • KCPK05 (9)
    • KCS10 (10)
    • KCS10B (7)
    • KCU10 (10)
    • KCU10B (7)
    • KCU25 (10)
    • KCU25B (4)
    • KM1 (3)
    • KY1615 (11)
    • MC2 (6)
    • NL300 (3)
    • NL920 (3)
    • TN7035 (3)
    Hand Of Tool
    Hand Of Tool
    • L (4)
    • N (6)
    • R (5)
    F Dimension
    F Dimension
    • 16.5 mm(1)
    • 17.5 mm(1)
    • 18.5 mm(1)
    • 20.5 mm(1)
    • 26.0 mm(1)
    • 30.0 mm(1)
    • 32.0 mm(4)
    • 32.5 mm(1)
    • 40.0 mm(2)
    • 50.0 mm(2)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.65 in(1)
    • 0.69 in(1)
    • 0.728 in(1)
    • 0.807 in(1)
    • 1.024 in(1)
    • 1.181 in(1)
    • 1.26 in(4)
    • 1.28 in(1)
    • 1.575 in(2)
    • 1.969 in(2)
    F Dimension MintoF Dimension Max
    Cutting Direction
    Cutting Direction
    • B (14)
    • S (1)
    Front-End
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.63 in(1)
    • 0.946 in(2)
    • 1.26 in(1)
    • 1.299 in(1)
    • 3.071 in(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 16.0 mm(1)
    • 24.0 mm(2)
    • 32.0 mm(1)
    • 33.0 mm(1)
    • 78.0 mm(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • C A (11)
    • H T (11)
    • H W (15)
    Back-End
    Shank Height
    Shank Height
    • 0.984 in(6)
    • 1.26 in(6)
    • 1.575 in(3)
    Shank Height MintoShank Height Max
    Shank Height
    Shank Height
    • 25.0 mm(6)
    • 32.0 mm(6)
    • 40.0 mm(3)
    Shank Height MintoShank Height Max
    Shank Width
    Shank Width
    • 0.984 in(9)
    • 1.26 in(3)
    • 1.575 in(3)
    Shank Width MintoShank Width Max
    Shank Width
    Shank Width
    • 25.0 mm(9)
    • 32.0 mm(3)
    • 40.0 mm(3)
    Shank Width MintoShank Width Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?