KM™ Quick Change Tools

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (152)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (152)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (152)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (152)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (152)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (152)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (152)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (152)
  • M Stainless Steel (147)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (147)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (147)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (147)
  • K Cast Iron (152)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (152)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (152)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (152)
  • N Non-Ferrous Materials (145)
    • N1
      Wrought Aluminum (145)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (145)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (73)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (145)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (145)
    • N6
      Carbon, Graphite Composites, CFRP (145)
    • N7
      MMC's (105)
  • S High-Temp Alloys (146)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (146)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (146)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (146)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (145)
  • H Hardened Materials (144)
    • H1
      Hardened Materials 44-48 HRC (144)
    • H2
      Hardened Materials 48-55 HRC (144)
    • H3
      Hardened Materials 56-60 HRC (95)
    • H4
      Hardened Materials >60 HRC (88)
  • C CFRP Materials (145)
    • C1
      CFRP, CFRP / CFRP (145)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (105)
Applications
Applications
  • Facing Facing (134)
  • Multiple Direction Cutting Multiple Direction Cutting (106)
  • Profiling Profiling (26)
  • TRN Boring TRN Boring (100)
  • Turning Turning (152)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (147)
  • Lightly Interrupted Cut (152)
  • Smooth Cut (152)
  • Varying Depth of Cut (152)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (17)
  • 63.0 (8)
  • 75.0 (33)
  • 90.0 (13)
  • 93.0 (35)
  • 95.0 (37)
  • 107.5 (9)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (52)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (2)
  • 1.0 (69)
  • 2.0 (82)
  • 3.0 (17)
  • 4.0 (123)
  • 6.0 (23)
  • 8.0 (75)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.379 in (9)
  • 1.575 in (33)
  • 1.772 in (2)
  • 1.969 in (32)
  • 2.362 in (60)
  • 2.757 in (14)
  • 3.15 in (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 35.0 mm (9)
  • 40.0 mm (33)
  • 45.0 mm (2)
  • 50.0 mm (32)
  • 60.0 mm (60)
  • 70.0 mm (14)
  • 80.0 mm (2)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (77)
  • 0.008 in (59)
  • 0.014 in (26)
  • 0.016 in (117)
  • 0.024 in (6)
  • 0.031 in (144)
  • -0.039 in (2)
  • 0.047 in (144)
  • 0.062 in (17)
  • 0.063 in (117)
  • 0.094 in (11)
  • 0.095 in (68)
  • 0.125 in (2)
  • 0.126 in (23)
  • 0.157 in (9)
  • 0.394 in (1)
  • 0.492 in (3)
  • 0.63 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (77)
  • 0.2 mm (59)
  • 0.351 mm (26)
  • 0.4 mm (117)
  • 0.601 mm (6)
  • 0.8 mm (144)
  • -1.0 mm (2)
  • 1.201 mm (144)
  • 1.576 mm (17)
  • 1.6 mm (117)
  • 2.375 mm (11)
  • 2.401 mm (68)
  • 3.176 mm (2)
  • 3.2 mm (23)
  • 4.0 mm (9)
  • 10.0 mm (1)
  • 12.5 mm (3)
  • 16.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (88)
  • 241 (17)
  • CG4 (1)
  • CL4 (86)
  • CM2 (91)
  • CM3 (88)
  • CM4 (54)
  • CM5 (1)
  • CPX (98)
  • CW2 (51)
  • CW2015 (88)
  • CW5025 (103)
  • GX (54)
  • HK1500 (90)
  • HT2 (65)
  • HTX (25)
  • K060 (44)
  • K090 (110)
  • K1 (34)
  • K10M (109)
  • K10P (102)
  • K10U (79)
  • K15U (78)
  • K20K (121)
  • K21 (61)
  • K25M (116)
  • K25P (105)
  • K313 (144)
  • K35P (80)
  • K420 (86)
  • K45 (46)
  • K68 (111)
  • KB1340 (58)
  • KB1345 (25)
  • KB1610 (50)
  • KB1625 (44)
  • KB1630 (25)
  • KB5610 (23)
  • KB5625 (44)
  • KB5630 (17)
  • KB9610 (76)
  • KB9640 (64)
  • KBH10 (76)
  • KBH10B (51)
  • KBH20 (76)
  • KBH20B (51)
  • KBK35 (17)
  • KC210 (79)
  • KC250 (64)
  • KC5010 (146)
  • KC5025 (143)
  • KC5410 (104)
  • KC5510 (143)
  • KC5525 (80)
  • KC710 (17)
  • KC720 (71)
  • KC722 (17)
  • KC730 (108)
  • KC7310 (142)
  • KC732 (62)
  • KC8050 (147)
  • KC810 (138)
  • KC850 (141)
  • KC9010 (146)
  • KC9025 (146)
  • KC910 (116)
  • KC9105 (133)
  • KC9110 (149)
  • KC9120 (139)
  • KC9125 (149)
  • KC9125RR (19)
  • KC9140 (146)
  • KC9145 (108)
  • KC9210 (26)
  • KC9215 (143)
  • KC9225 (144)
  • KC9240 (148)
  • KC9240NEW (147)
  • KC9245 (143)
  • KC9315 (145)
  • KC9320 (142)
  • KC9325 (143)
  • KC935 (145)
  • KC950 (116)
  • KC990 (144)
  • KCK05 (143)
  • KCK05B (125)
  • KCK15 (143)
  • KCK15B (144)
  • KCK20 (144)
  • KCK20B (145)
  • KCM15 (143)
  • KCM15B (134)
  • KCM25 (145)
  • KCM25B (144)
  • KCM35 (121)
  • KCM35B (118)
  • KCP05 (117)
  • KCP05B (106)
  • KCP10 (149)
  • KCP10B (146)
  • KCP25 (149)
  • KCP25B (150)
  • KCP25C (152)
  • KCP30 (147)
  • KCP30B (123)
  • KCP40 (117)
  • KCP40B (123)
  • KCPK05 (137)
  • KCS10 (18)
  • KCS10B (135)
  • KCU10 (146)
  • KCU10B (145)
  • KCU25 (144)
  • KCU25B (143)
  • KD050 (46)
  • KD081 (46)
  • KD100 (17)
  • KD120 (46)
  • KD1400 (31)
  • KD1405 (17)
  • KD1425 (31)
  • KM1 (56)
  • KMF (17)
  • KS15 (17)
  • KT1120 (12)
  • KT125 (72)
  • KT150 (45)
  • KT175 (72)
  • KT315 (107)
  • KT325 (73)
  • KT5020 (8)
  • KTP10 (105)
  • KTP25S (57)
  • KU10T (106)
  • KU30T (143)
  • KY1310 (71)
  • KY1320 (105)
  • KY1540 (44)
  • KY1615 (91)
  • KY2000 (60)
  • KY2100 (36)
  • KY3000 (109)
  • KY3400 (88)
  • KY3500 (114)
  • KY4000 (46)
  • KY4300 (33)
  • KY4400 (94)
  • KYHK15B (94)
  • KYK10 (50)
  • KYK25 (79)
  • KYK35 (114)
  • KYS25 (42)
  • KYS30 (48)
  • MC2 (1)
  • NL200 (43)
  • NL250 (137)
  • NL300 (112)
  • NL400 (39)
  • NL920 (112)
  • P25 (38)
  • PB100 (17)
  • PB170 (17)
  • PB250 (17)
  • PB300 (17)
  • PS5 (65)
  • SP0819 (95)
  • SP0A00 (19)
  • SP0NTA (1)
  • SP3019 (77)
  • SP4019 (66)
  • SP61EJ (19)
  • SPADAP (16)
  • SPN4W2 (9)
  • SPSREJ (11)
  • THM (61)
  • THM-X (63)
  • THMF-X (44)
  • TN10P (124)
  • TN10U (79)
  • TN15M (109)
  • TN15U (78)
  • TN2000 (100)
  • TN20K (122)
  • TN20P (144)
  • TN30M (131)
  • TN30P (116)
  • TN4000 (100)
  • TN5015 (136)
  • TN5020 (125)
  • TN5105 (100)
  • TN5120 (125)
  • TN6010 (43)
  • TN6025 (76)
  • TN7005 (71)
  • TN7010 (138)
  • TN7015 (140)
  • TN7025 (140)
  • TN7035 (117)
  • TN7105 (85)
  • TN7110 (117)
  • TN7115 (128)
  • TN7125 (140)
  • TN7135 (117)
  • TN8025 (132)
  • TTI15 (65)
  • TTM (2)
  • TTM09 (38)
  • TTR (39)
  • TTR-X (9)
  • TTS (85)
  • TTX (53)
  • W00342 (10)
  • WBH10C (68)
  • WBH10P (17)
  • WBH10U (50)
  • WBH20P (76)
  • WBH25P (44)
  • WBH25U (70)
  • WBH30P (17)
  • WBK40U (58)
  • WBK45U (51)
  • WDN00U (17)
  • WDN25U (31)
  • WK05CT (143)
  • WK15CT (93)
  • WK20CT (144)
  • WM15CT (143)
  • WM25CT (145)
  • WM35CT (143)
  • WP05CT (23)
  • WP15CT (146)
  • WP20TT (22)
  • WP25CT (146)
  • WP35CT (145)
  • WS10PT (132)
  • WS25PT (143)
  • WU10HT (134)
  • WU10PT (104)
  • WU25PT (104)
  • X00511 (17)
  • X00580 (17)
  • X00581 (17)
  • X00582 (17)
  • X00583 (17)
  • X00584 (17)
  • X00585 (17)
  • X00586 (17)
  • X00591 (17)
  • X00592 (17)
  • X00593 (17)
  • X00594 (17)
  • X00596 (17)
  • X00597 (17)
  • X00599 (17)
Hand Of Tool
Hand Of Tool
  • L (19)
  • N (10)
  • R (23)
Wiper Insert
Wiper Insert
  • N (152)
  • Y (74)
F Dimension
F Dimension
  • 0.0 mm (16)
  • 10.0 mm (1)
  • 12.5 mm (1)
  • 24.0 mm (2)
  • 27.0 mm (8)
  • 30.0 mm (4)
  • 35.0 mm (4)
  • 43.0 mm (9)
  • 48.0 mm (1)
  • 53.0 mm (4)
  • 59.0 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.0 in (16)
  • 0.394 in (1)
  • 0.492 in (1)
  • 0.946 in (2)
  • 1.063 in (8)
  • 1.181 in (4)
  • 1.379 in (4)
  • 1.693 in (9)
  • 1.891 in (1)
  • 2.087 in (4)
  • 2.323 in (2)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • -1.0 mm (2)
  • 40.0 mm (4)
  • 44.0 mm (3)
  • 50.0 mm (18)
  • 60.0 mm (2)
  • 63.0 mm (16)
  • 74.0 mm (4)
  • 80.0 mm (35)
  • 90.0 mm (2)
  • 94.0 mm (2)
  • 100.0 mm (10)
  • 104.0 mm (2)
  • 118.0 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • -0.039 in (2)
  • 1.575 in (4)
  • 1.732 in (3)
  • 1.969 in (18)
  • 2.362 in (2)
  • 2.48 in (16)
  • 2.914 in (4)
  • 3.15 in (35)
  • 3.543 in (2)
  • 3.701 in (2)
  • 3.938 in (10)
  • 4.094 in (2)
  • 4.646 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • -0.039 in (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • -1.0 mm (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (3)
  • S (49)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (38)
  • NEGATIVE-ZERO (8)
  • NEUTRAL (ZERO) (4)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (9)
  • 1.575 in (25)
  • 1.969 in (20)
  • 2.362 in (39)
  • 2.757 in (7)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (9)
  • 40.0 mm (25)
  • 50.0 mm (20)
  • 60.0 mm (39)
  • 70.0 mm (7)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (2)
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (34)
  • D-DIAMOND/RHOMBIC 55 (50)
  • R-ROUND (6)
  • S-SQUARE 90 (39)
  • T-TRIANGLE 60 (11)
  • W-TRIGON 80 (12)
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.581 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 40.151 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (100)
  • B L (78)
  • C A (117)
  • C N (121)
  • D P (57)
  • H T (108)
  • H W (152)
Back-End
Connection Type
Connection Type
  • TAPER SHANK (52)
System Size
System Size
  • KM40TS (8)
  • KM50TS (12)
  • KM63TS (23)
  • KM80TS (9)
Back-End Diameter
Back-End Diameter
  • 32.0 mm (9)
  • 40.0 mm (35)
  • 50.0 mm (32)
  • 63.0 mm (60)
  • 80.0 mm (16)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.26 in (9)
  • 1.575 in (35)
  • 1.969 in (32)
  • 2.48 in (60)
  • 3.15 in (16)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""