Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Need Help? Contact an Expert site stretcher close
Read More

ISO holders with through coolant direct the coolant where it is needed. Coolant nozzles point the coolant to the cutting zone where the chip is being formed. This controls and manages heat more efficiently, providing maximum tool life and process safety. The through coolant toolholders are available as Kenlever™, Screw-On, and Kenloc™ clamping styles.

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (48)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (48)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (48)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (48)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (48)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (48)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (48)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (48)
  • M Stainless Steel (48)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (48)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (48)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (48)
  • K Cast Iron (48)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (48)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (48)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (48)
  • N Non-Ferrous Materials (48)
    • N1
      Wrought Aluminum
      (48)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (48)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (32)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (48)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (48)
    • N6
      Carbon, Graphite Composites, CFRP
      (40)
    • N7
      MMC's
      (48)
  • S High-Temp Alloys (48)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (48)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (48)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (48)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (48)
  • H Hardened Materials (40)
    • H1
      Hardened Materials 44-48 HRC
      (40)
    • H2
      Hardened Materials 48-55 HRC
      (40)
    • H3
      Hardened Materials 56-60 HRC
      (40)
    • H4
      Hardened Materials >60 HRC
      (40)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (48)
  • Interrupted (24)
  • Lightly Interrupted Cut (48)
  • Smooth Cut (48)
  • Varying Depth of Cut (48)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (4)
  • 93.0 (28)
  • 95.0 (16)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (32)
  • 2.0 (32)
  • 3.0 (8)
  • 4.0 (24)
  • 6.0 (12)
  • 8.0 (12)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.001 in (8)
  • 0.002 in (16)
  • 0.004 in (40)
  • 0.008 in (40)
  • 0.014 in (4)
  • 0.016 in (48)
  • 0.024 in (4)
  • 0.031 in (48)
  • 0.047 in (44)
  • 0.062 in (4)
  • 0.063 in (24)
  • 0.095 in (8)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (8)
  • 0.05 mm (16)
  • 0.1 mm (40)
  • 0.2 mm (40)
  • 0.351 mm (4)
  • 0.4 mm (48)
  • 0.601 mm (4)
  • 0.8 mm (48)
  • 1.201 mm (44)
  • 1.576 mm (4)
  • 1.6 mm (24)
  • 2.401 mm (8)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (20)
  • 241 (4)
  • CL4 (16)
  • CM2 (20)
  • CM3 (16)
  • CM4 (12)
  • CPX (16)
  • CW2 (12)
  • GH1 (4)
  • GX (8)
  • HT2 (28)
  • HTX (24)
  • K060 (12)
  • K090 (20)
  • K1 (4)
  • K1010P (4)
  • K10M (40)
  • K10P (32)
  • K10U (40)
  • K15U (40)
  • K20K (36)
  • K21 (12)
  • K25M (40)
  • K25P (32)
  • K313 (48)
  • K35P (16)
  • K420 (16)
  • K45 (16)
  • K68 (36)
  • KB1340 (12)
  • KB1345 (16)
  • KB1610 (32)
  • KB1625 (24)
  • KB1630 (16)
  • KB5610 (24)
  • KB5625 (28)
  • KB5630 (20)
  • KB9610 (36)
  • KB9640 (16)
  • KBH10 (40)
  • KBH10B (16)
  • KBH20 (40)
  • KBH20B (16)
  • KBK35 (4)
  • KC210 (12)
  • KC250 (8)
  • KC5010 (48)
  • KC5020P (12)
  • KC5025 (48)
  • KC5410 (40)
  • KC5510 (32)
  • KC5525 (20)
  • KC710 (4)
  • KC720 (36)
  • KC722 (4)
  • KC725M (8)
  • KC730 (44)
  • KC7310 (32)
  • KC732 (36)
  • KC8050 (48)
  • KC810 (44)
  • KC850 (44)
  • KC9010 (40)
  • KC9025 (48)
  • KC910 (40)
  • KC9105 (48)
  • KC9110 (48)
  • KC9120 (36)
  • KC9125 (48)
  • KC9125RR (4)
  • KC9140 (32)
  • KC9145 (20)
  • KC915M (4)
  • KC9210 (4)
  • KC9215 (32)
  • KC9225 (48)
  • KC9240 (48)
  • KC9240NEW (48)
  • KC9245 (32)
  • KC9315 (48)
  • KC9320 (48)
  • KC9325 (40)
  • KC935 (48)
  • KC950 (36)
  • KC990 (40)
  • KCD25 (16)
  • KCK05 (48)
  • KCK05B (44)
  • KCK15 (44)
  • KCK15B (44)
  • KCK20 (48)
  • KCK20B (48)
  • KCM15 (48)
  • KCM15B (44)
  • KCM25 (48)
  • KCM25B (48)
  • KCM35 (40)
  • KCM35B (32)
  • KCP05 (48)
  • KCP05B (40)
  • KCP10 (48)
  • KCP10B (48)
  • KCP15 (4)
  • KCP25 (48)
  • KCP25B (48)
  • KCP25C (44)
  • KCP30 (48)
  • KCP30B (28)
  • KCP40 (20)
  • KCP40B (32)
  • KCPK05 (28)
  • KCS10 (20)
  • KCS10B (40)
  • KCU10 (48)
  • KCU25 (48)
  • KD050 (24)
  • KD081 (24)
  • KD100 (12)
  • KD120 (16)
  • KD1400 (32)
  • KD1405 (12)
  • KD1425 (32)
  • KM1 (12)
  • KMF (4)
  • KS15 (4)
  • KT1120 (8)
  • KT125 (24)
  • KT150 (16)
  • KT175 (36)
  • KT315 (48)
  • KT325 (32)
  • KT5020 (8)
  • KTP10 (16)
  • KU10 (16)
  • KU10T (48)
  • KU30T (48)
  • KY1310 (16)
  • KY1320 (24)
  • KY1540 (8)
  • KY1615 (20)
  • KY2000 (12)
  • KY2100 (8)
  • KY3000 (20)
  • KY3400 (16)
  • KY3500 (24)
  • KY4000 (12)
  • KY4300 (4)
  • KY4400 (24)
  • KYHK15B (24)
  • KYK10 (16)
  • KYK25 (16)
  • KYK35 (24)
  • KYS25 (8)
  • KYS30 (12)
  • NL200 (8)
  • NL250 (28)
  • NL300 (16)
  • NL400 (8)
  • NL920 (28)
  • P25 (8)
  • PS5 (12)
  • SP0819 (16)
  • SP3019 (20)
  • SP4019 (20)
  • SP4036 (4)
  • SP4093 (4)
  • SP61EJ (4)
  • TN7035 (4)
  • X00511 (4)
  • X00580 (4)
  • X00581 (4)
  • X00582 (4)
  • X00583 (4)
  • X00584 (4)
  • X00585 (4)
  • X00586 (4)
  • X00591 (4)
  • X00592 (4)
  • X00593 (4)
  • X00594 (4)
  • X00596 (4)
  • X00597 (4)
  • X00599 (4)
Hand Of Tool
Hand Of Tool
  • L (24)
  • R (24)
Wiper Insert
Wiper Insert
  • N (48)
  • Y (36)
F Dimension
F Dimension
  • 25.0 mm (22)
  • 32.0 mm (26)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.984 in (22)
  • 1.26 in (26)
F Dimension Min to F Dimension Max
Cutting Direction
Cutting Direction
  • B (16)
  • S (32)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (28)
  • NEGATIVE-ZERO (4)
  • NEUTRAL (ZERO) (16)
Front-End
Clamp Style
Clamp Style
  • M (8)
  • P (24)
  • S (16)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
  • D-DIAMOND/RHOMBIC 55 (12)
  • S-SQUARE 90 (4)
  • T-TRIANGLE 60 (4)
  • V-DIAMOND/RHOMBIC 35 (12)
  • W-TRIGON 80 (8)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (36)
  • B L (40)
  • C A (24)
  • C N (24)
  • D P (36)
  • H T (48)
  • H W (48)
Back-End
Shank Height
Shank Height
  • 0.787 in (24)
  • 0.984 in (24)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 20.0 mm (24)
  • 25.0 mm (24)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.787 in (22)
  • 0.984 in (26)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 20.0 mm (22)
  • 25.0 mm (26)
Shank Width Min to Shank Width Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • ProfilingProfiling
  • FacingFacing
  • TurningTurning
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [CS] Coolant Supply Size Gage Insert
6475064 PCLNL2020X12C PCLNL2020X12C 20.0000 .7874 20.0000 .7874 25.0000 .9843 97.0000 3.818 34.0000 1.338 31.5000 1.240 G1/8 CNMA120408
    List price:
    $288.07 /each
    Your price:
    Qty
    6475065 PCLNL2525X12C PCLNL2525X12C 25.0000 .9843 25.0000 .9843 32.0000 1.259 109.0000 4.291 34.0000 1.338 36.5000 1.437 G1/8 CNMA120408
      List price:
      $307.48 /each
      Your price:
      Qty
      6475062 PCLNR2020X12C PCLNR2020X12C 20.0000 .7874 20.0000 .7874 25.0000 .9843 97.0000 3.818 34.0000 1.338 31.5000 1.240 G1/8 CNMA120408
        List price:
        $288.07 /each
        Your price:
        Qty
        6475063 PCLNR2525X12C PCLNR2525X12C 25.0000 .9843 25.0000 .9843 32.0000 1.259 109.0000 4.291 34.0000 1.338 36.5000 1.437 G1/8 CNMA120408
          List price:
          $307.48 /each
          Your price:
          Qty
          List price:
          Discount: %
          Your price:
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          • TurningTurning
          • ProfilingProfiling
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [CS] Coolant Supply Size Gage Insert
          6475070 PDJNL2020X11C PDJNL2020X11C 20.0000 .7874 20.0000 .7874 25.0000 .9843 96.0000 3.779 33.0000 1.299 31.5000 1.240 G1/8 DNMA110408
            List price:
            $288.07 /each
            Your price:
            Qty
            6475111 PDJNL2020X15C PDJNL2020X15C 20.0000 .7874 20.0000 .7874 25.0000 .9843 104.0000 4.094 41.0000 1.614 31.5000 1.240 G1/8 DNMA150608
              List price:
              $288.07 /each
              Your price:
              Qty
              6475112 PDJNL2525X11C PDJNL2525X11C 25.0000 .9843 25.0000 .9843 32.0000 1.259 108.0000 4.252 33.0000 1.299 36.5000 1.437 G1/8 DNMA110408
                List price:
                $307.48 /each
                Your price:
                Qty
                6475113 PDJNL2525X15C PDJNL2525X15C 25.0000 .9843 25.0000 .9843 32.0000 1.259 116.0000 4.566 41.0000 1.614 36.5000 1.437 G1/8 DNMA150608
                  List price:
                  $307.48 /each
                  Your price:
                  Qty
                  6475067 PDJNR2020X15C PDJNR2020X15C 20.0000 .7874 20.0000 .7874 25.0000 .9843 104.0000 4.094 41.0000 1.614 31.5000 1.240 G1/8 DNMA150608
                    List price:
                    $288.07 /each
                    Your price:
                    Qty
                    6475069 PDJNR2525X15C PDJNR2525X15C 25.0000 .9843 25.0000 .9843 32.0000 1.259 116.0000 4.566 41.0000 1.614 36.5000 1.437 G1/8 DNMA150608
                      List price:
                      $307.48 /each
                      Your price:
                      Qty
                      List price:
                      Discount: %
                      Your price:
                      Replacement This item is no longer available
                      Replacement Product Please contact customer service for assistance
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      • ProfilingProfiling
                      • TurningTurning
                      • FacingFacing
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [FA] F A Dimension [FA] F A Dimension [L1A] L1 A Dimension [L1A] L1 A Dimension [CS] Coolant Supply Size Gage Insert
                      6475116 PSSNL2020X12C PSSNL2020X12C 20.0000 .7874 20.0000 .7874 25.0000 .9840 97.0000 3.818 34.0000 1.338 31.0000 1.220 8.7000 .3400 8.7000 .3400 G1/8 SNMA120408
                        List price:
                        $288.07 /each
                        Your price:
                        Qty
                        6475117 PSSNL2525X12C PSSNL2525X12C 25.0000 .9843 25.0000 .9843 32.0000 1.259 109.0000 4.291 34.0000 1.338 36.0000 1.417 8.7000 .3400 8.7000 .3400 G1/8 SNMA120408
                          List price:
                          $307.48 /each
                          Your price:
                          Qty
                          6475114 PSSNR2020X12C PSSNR2020X12C 20.0000 .7870 20.0000 .7870 25.0000 .9840 97.0000 3.818 34.0000 1.339 31.0000 1.220 8.7000 .3400 8.7000 .3400 G1/8 SNMA120408
                            List price:
                            $288.07 /each
                            Your price:
                            Qty
                            6475115 PSSNR2525X12C PSSNR2525X12C 25.0000 .9843 25.0000 .9843 32.0000 1.259 109.0000 4.291 34.0000 1.338 36.0000 1.417 8.7000 .3400 8.7000 .3400 G1/8 SNMA120408
                              List price:
                              $307.48 /each
                              Your price:
                              Qty
                              List price:
                              Discount: %
                              Your price:
                              Replacement This item is no longer available
                              Replacement Product Please contact customer service for assistance
                              Qty

                              Sold in pkg. of

                              ORIGINAL PRODUCT

                              • TurningTurning
                              • ProfilingProfiling
                              • FacingFacing
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [CS] Coolant Supply Size Gage Insert
                              6475133 PWLNL2020X08C PWLNL2020X08C 20.0000 .7874 20.0000 .7874 25.0000 .9843 97.0000 3.818 34.0000 1.338 31.0000 1.220 G1/8 WNMA080408
                                List price:
                                $288.07 /each
                                Your price:
                                Qty
                                6475134 PWLNL2525X06C PWLNL2525X06C 25.0000 .9843 25.0000 .9843 32.0000 1.259 105.0000 4.133 30.0000 1.181 36.0000 1.417 G1/8 WNMA060408
                                  List price:
                                  $307.48 /each
                                  Your price:
                                  Qty
                                  6475135 PWLNL2525X08C PWLNL2525X08C 25.0000 .9843 25.0000 .9843 32.0000 1.259 109.0000 4.291 34.0000 1.338 36.0000 1.417 G1/8 WNMA080408
                                    List price:
                                    $307.48 /each
                                    Your price:
                                    Qty
                                    6475118 PWLNR2020X06C PWLNR2020X06C 20.0000 .7874 20.0000 .7874 25.0000 .9843 93.0000 3.661 30.0000 1.181 31.0000 1.220 G1/8 WNMA060408
                                      List price:
                                      $288.07 /each
                                      Your price:
                                      Qty
                                      6475119 PWLNR2020X08C PWLNR2020X08C 20.0000 .7874 20.0000 .7874 25.0000 .9843 97.0000 3.818 34.0000 1.338 31.0000 1.220 G1/8 WNMA080408
                                        List price:
                                        $288.07 /each
                                        Your price:
                                        Qty
                                        6475131 PWLNR2525X08C PWLNR2525X08C 25.0000 .9843 25.0000 .9843 32.0000 1.259 109.0000 4.291 34.0000 1.339 36.0000 1.417 G1/8 WNMA080408
                                          List price:
                                          $307.48 /each
                                          Your price:
                                          Qty
                                          List price:
                                          Discount: %
                                          Your price:
                                          Replacement This item is no longer available
                                          Replacement Product Please contact customer service for assistance
                                          Qty

                                          Sold in pkg. of

                                          ORIGINAL PRODUCT

                                          • TurningTurning
                                          • ProfilingProfiling
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [CS] Coolant Supply Size Gage Insert
                                          6475142 MTJNL2020X16C MTJNL2020X16C 20.0000 .7874 20.0000 .7874 25.0000 .9843 95.0000 3.740 32.0000 1.259 31.6000 1.244 G1/8 TNMA160408
                                            List price:
                                            $315.40 /each
                                            Your price:
                                            Qty
                                            6475143 MTJNL2525X16C MTJNL2525X16C 25.0000 .9843 25.0000 .9843 32.0000 1.259 107.0000 4.212 32.0000 1.259 36.6000 1.440 G1/8 TNMA160408
                                              List price:
                                              $339.17 /each
                                              Your price:
                                              Qty
                                              6475140 MTJNR2020X16C MTJNR2020X16C 20.0000 .7874 20.0000 .7874 25.0000 .9843 95.0000 3.740 32.0000 1.259 31.6000 1.244 G1/8 TNMA160408
                                                List price:
                                                $315.40 /each
                                                Your price:
                                                Qty
                                                6475141 MTJNR2525X16C MTJNR2525X16C 25.0000 .9843 25.0000 .9843 32.0000 1.259 107.0000 4.212 32.0000 1.259 36.6000 1.440 G1/8 TNMA160408
                                                  List price:
                                                  $339.17 /each
                                                  Your price:
                                                  Qty
                                                  List price:
                                                  Discount: %
                                                  Your price:
                                                  Replacement This item is no longer available
                                                  Replacement Product Please contact customer service for assistance
                                                  Qty

                                                  Sold in pkg. of

                                                  ORIGINAL PRODUCT

                                                  • TurningTurning
                                                  • ProfilingProfiling
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [CS] Coolant Supply Size Gage Insert
                                                  6475138 MVJNL2025X16C MVJNL2025X16C 20.0000 .7874 25.0000 .9843 32.0000 1.259 109.0000 4.291 46.0000 1.811 37.5000 1.476 G1/8 VNMA160408
                                                    List price:
                                                    $345.35 /each
                                                    Your price:
                                                    Qty
                                                    6475139 MVJNL2525X16C MVJNL2525X16C 25.0000 .9843 25.0000 .9843 32.0000 1.259 121.0000 4.763 46.0000 1.811 42.5000 1.673 G1/8 VNMA160408
                                                      List price:
                                                      $368.25 /each
                                                      Your price:
                                                      Qty
                                                      6475136 MVJNR2025X16C MVJNR2025X16C 20.0000 .7874 25.0000 .9843 32.0000 1.259 109.0000 4.291 46.0000 1.811 37.5000 1.476 G1/8 VNMA160408
                                                        List price:
                                                        $345.35 /each
                                                        Your price:
                                                        Qty
                                                        6475137 MVJNR2525X16C MVJNR2525X16C 25.0000 .9843 25.0000 .9843 32.0000 1.259 121.0000 4.763 46.0000 1.811 42.5000 1.673 G1/8 VNMA160408
                                                          List price:
                                                          $368.25 /each
                                                          Your price:
                                                          Qty
                                                          List price:
                                                          Discount: %
                                                          Your price:
                                                          Replacement This item is no longer available
                                                          Replacement Product Please contact customer service for assistance
                                                          Qty

                                                          Sold in pkg. of

                                                          ORIGINAL PRODUCT

                                                          • FacingFacing
                                                          • ProfilingProfiling
                                                          • TurningTurning
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [CS] Coolant Supply Size Gage Insert
                                                          6475146 SCLCL2020X09C SCLCL2020X09C 20.0000 .7874 20.0000 .7874 25.0000 .9843 87.5000 3.444 24.5000 .9646 26.0000 1.023 G1/8 CCMT09T308
                                                            List price:
                                                            $261.27 /each
                                                            Your price:
                                                            Qty
                                                            6475147 SCLCL2525X09C SCLCL2525X09C 25.0000 .9843 25.0000 .9843 32.0000 1.259 99.5000 3.917 24.5000 .9646 31.0000 1.220 G1/8 CCMT09T308
                                                              List price:
                                                              $281.51 /each
                                                              Your price:
                                                              Qty
                                                              6475144 SCLCR2020X09C SCLCR2020X09C 20.0000 .7874 20.0000 .7874 25.0000 .9843 87.5000 3.444 24.5000 .9646 26.0000 1.023 G1/8 CCMT09T308
                                                                List price:
                                                                $261.27 /each
                                                                Your price:
                                                                Qty
                                                                6475145 SCLCR2525X09C SCLCR2525X09C 25.0000 .9843 25.0000 .9843 32.0000 1.259 99.5000 3.917 24.5000 .9646 31.0000 1.220 G1/8 CCMT09T308
                                                                  List price:
                                                                  $281.51 /each
                                                                  Your price:
                                                                  Qty
                                                                  List price:
                                                                  Discount: %
                                                                  Your price:
                                                                  Replacement This item is no longer available
                                                                  Replacement Product Please contact customer service for assistance
                                                                  Qty

                                                                  Sold in pkg. of

                                                                  ORIGINAL PRODUCT

                                                                  • TurningTurning
                                                                  • ProfilingProfiling
                                                                  View Products
                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [CS] Coolant Supply Size Gage Insert
                                                                  6475150 SDJCL2020X11C SDJCL2020X11C 20.0000 .7874 20.0000 .7874 25.0000 .9843 93.5000 3.681 30.5000 1.200 26.0000 1.023 G1/8 DCMT11T308
                                                                    List price:
                                                                    $261.27 /each
                                                                    Your price:
                                                                    Qty
                                                                    6475151 SDJCL2525X11C SDJCL2525X11C 25.0000 .9843 25.0000 .9843 32.0000 1.259 105.5000 4.153 30.5000 1.200 31.0000 1.220 G1/8 DCMT11T308
                                                                      List price:
                                                                      $281.51 /each
                                                                      Your price:
                                                                      Qty
                                                                      6475148 SDJCR2020X11C SDJCR2020X11C 20.0000 .7874 20.0000 .7874 25.0000 .9843 93.5000 3.681 30.5000 1.200 26.0000 1.023 G1/8 DCMT11T308
                                                                        List price:
                                                                        $261.27 /each
                                                                        Your price:
                                                                        Qty
                                                                        6475149 SDJCR2525X11C SDJCR2525X11C 25.0000 .9843 25.0000 .9843 32.0000 1.259 105.5000 4.153 30.5000 1.200 31.0000 1.220 G1/8 DCMT11T308
                                                                          List price:
                                                                          $281.51 /each
                                                                          Your price:
                                                                          Qty
                                                                          List price:
                                                                          Discount: %
                                                                          Your price:
                                                                          Replacement This item is no longer available
                                                                          Replacement Product Please contact customer service for assistance
                                                                          Qty

                                                                          Sold in pkg. of

                                                                          ORIGINAL PRODUCT

                                                                          • ProfilingProfiling
                                                                          • TurningTurning
                                                                          View Products
                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [H2] Head Height [H2] Head Height [CS] Coolant Supply Size Gage Insert
                                                                          6475157 SVJBL2020X16C SVJBL2020X16C 20.0000 .7874 20.0000 .7874 25.0000 .9843 103.0000 4.055 40.0000 1.574 26.0000 1.023 G1/8 VBMT160408
                                                                            List price:
                                                                            $261.27 /each
                                                                            Your price:
                                                                            Qty
                                                                            6475159 SVJBL2525X16C SVJBL2525X16C 25.0000 .9843 25.0000 .9843 32.0000 1.259 115.0000 4.527 40.0000 1.574 31.0000 1.220 G1/8 VBMT160408
                                                                              List price:
                                                                              $281.51 /each
                                                                              Your price:
                                                                              Qty
                                                                              6475152 SVJBR2020X11C SVJBR2020X11C 20.0000 .7874 20.0000 .7874 25.0000 .9843 98.0000 3.858 35.0000 1.378 27.0000 1.063 G1/8 VBMT110304