V-Bottom Round Toolholders
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (13)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (13)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (13)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (13)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (13)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (13)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (13)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (13)
-
-
M Stainless Steel (13)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (13)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (13)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (13)
-
-
N Non-Ferrous Materials (13)
-
N1Wrought Aluminum (13)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (13)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100 (13)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (13)
-
N7MMC's (13)
-
-
S High-Temp Alloys (13)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (13)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (13)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (13)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (13)
-
Applications
Applications
-
Facing (17)
-
Multiple Direction Cutting (17)
-
Profiling (14)
-
Turning (17)
Cutting Condition
Cutting Condition
-
Lightly Interrupted Cut (13)
-
Smooth Cut (13)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
-
45.0 (6)
-
90.0 (11)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
-
1.0 (13)
to
Over All Length [L]
Over All Length [L]
-
5.955 in (3)
-
6.0 in (10)
-
6.742 in (4)
to
Over All Length [L]
Over All Length [L]
-
151.25 mm (3)
-
152.4 mm (10)
-
171.25 mm (4)
to
Corner Radius
Corner Radius
-
0.125 in (4)
-
0.188 in (4)
-
0.25 in (5)
to
Corner Radius
Corner Radius
-
3.176 mm (4)
-
4.775 mm (4)
-
6.351 mm (5)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
-
K313 (13)
-
KC5010 (13)
-
KC5510 (4)
-
KC732 (5)
-
KCS10 (13)
-
KCS10B (13)
-
KY1525 (9)
-
KY1540 (9)
-
KY2000 (4)
-
KY2100 (9)
-
KY3000 (5)
-
KY3400 (5)
-
KY4300 (13)
-
KYS25 (9)
-
KYS30 (9)
Hand Of Tool
Hand Of Tool
-
L (3)
-
N (8)
-
R (6)
Wiper Insert
Wiper Insert
-
N (13)
F Dimension
F Dimension
-
12.5 mm (2)
-
12.601 mm (2)
-
15.775 mm (2)
-
16.0 mm (2)
-
25.401 mm (1)
-
31.75 mm (2)
-
32.0 mm (1)
-
38.1 mm (3)
-
40.0 mm (2)
to
F Dimension
F Dimension
-
0.492 in (2)
-
0.496 in (2)
-
0.621 in (2)
-
0.63 in (2)
-
1.0 in (1)
-
1.25 in (2)
-
1.26 in (1)
-
1.5 in (3)
-
1.575 in (2)
to
Cutting Direction
Cutting Direction
-
E (11)
-
S (6)
Front-End
Maximum Cutting Depth
Maximum Cutting Depth
-
0.25 in (3)
-
0.276 in (1)
-
0.315 in (2)
-
0.748 in (1)
-
0.75 in (2)
-
1.131 in (1)
-
1.143 in (1)
-
1.496 in (2)
-
1.5 in (4)
to
Maximum Cutting Depth
Maximum Cutting Depth
-
6.351 mm (3)
-
7.0 mm (1)
-
8.0 mm (2)
-
19.0 mm (1)
-
19.05 mm (2)
-
28.701 mm (1)
-
29.0 mm (1)
-
38.0 mm (2)
-
38.1 mm (4)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
-
C A (13)
-
C N (9)
-
H W (13)
Back-End
Shank Height
Shank Height
-
0.984 in (3)
-
1.0 in (5)
-
1.25 in (5)
-
1.26 in (4)
to
Shank Height
Shank Height
-
25.0 mm (3)
-
25.401 mm (5)
-
31.75 mm (5)
-
32.0 mm (4)
to
Shank Width
Shank Width
-
0.984 in (3)
-
1.0 in (5)
-
1.25 in (5)
-
1.26 in (4)
to
Shank Width
Shank Width
-
25.0 mm (3)
-
25.401 mm (5)
-
31.75 mm (5)
-
32.0 mm (4)
to
No filters matching ""
