Kenloc™ • M-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (80)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(80)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(80)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(80)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(80)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(80)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(80)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(80)
- M Stainless Steel (80)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(80)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(80)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(80)
- K Cast Iron (80)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(80)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(80)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(80)
- N Non-Ferrous Materials (80)
- N1Wrought Aluminum (80)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(80)
- N3High-Silicon Aluminum Alloys Si >12.2%(47)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (80)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (80)
- N6Carbon, Graphite Composites, CFRP (80)
- N7MMC's (75)
- S High-Temp Alloys (80)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(80)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(80)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(80)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(80)
- H Hardened Materials (79)
- H1Hardened Materials 44-48 HRC(79)
- H2Hardened Materials 48-55 HRC(79)
- H3Hardened Materials 56-60 HRC(72)
- H4Hardened Materials >60 HRC(51)
- C CFRP Materials (80)
- C1CFRP, CFRP / CFRP (80)
- C2CFRP / Aluminium CFRP / Non-Ferrous (75)
Applications
Applications
Multiple Direction Cutting (71)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (80)
- Lightly Interrupted Cut (80)
- Smooth Cut (80)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 62.5 (1)
- 75.0 (9)
- 90.0 (8)
- 93.0 (28)
- 95.0 (32)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (47)
- 2.0 (62)
- 3.0 (11)
- 4.0 (68)
- 6.0 (12)
- 8.0 (39)
to
Over All Length [L]
Over All Length [L]
- 1.365 in(1)
- 1.625 in(79)
to
Over All Length [L]
Over All Length [L]
- 34.676 mm(1)
- 41.276 mm(79)
to
Corner Radius
Corner Radius
- 0.004 in(45)
- 0.008 in(51)
- 0.014 in(1)
- 0.016 in(71)
- 0.024 in(6)
- 0.031 in(80)
- 0.047 in(80)
- 0.063 in(62)
- 0.094 in(9)
- 0.095 in(20)
- 0.125 in(2)
- 0.126 in(2)
- 0.157 in(3)
to
Corner Radius
Corner Radius
- 0.1 mm(45)
- 0.2 mm(51)
- 0.351 mm(1)
- 0.4 mm(71)
- 0.601 mm(6)
- 0.8 mm(80)
- 1.201 mm(80)
- 1.6 mm(62)
- 2.375 mm(9)
- 2.401 mm(20)
- 3.176 mm(2)
- 3.2 mm(2)
- 4.0 mm(3)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K060 (18)
- K090 (9)
- K1 (3)
- K313 (75)
- K68 (69)
- KB1340 (25)
- KB1345 (32)
- KB1610 (50)
- KB1630 (41)
- KB5610 (38)
- KB5630 (38)
- KBH10 (51)
- KBH10B (42)
- KBH20 (51)
- KBH20B (42)
- KBK35 (14)
- KC5010 (80)
- KC5025 (80)
- KC5410 (68)
- KC730 (71)
- KC850 (75)
- KC9125 (11)
- KCK05 (65)
- KCK05B (30)
- KCK15 (73)
- KCK15B (73)
- KCK20 (75)
- KCK20B (73)
- KCM15 (70)
- KCM15B (73)
- KCM25 (76)
- KCM25B (76)
- KCM35 (71)
- KCM35B (41)
- KCP05 (55)
- KCP05B (58)
- KCP10 (80)
- KCP10B (80)
- KCP25 (80)
- KCP25B (80)
- KCP25C (80)
- KCP30 (80)
- KCP30B (62)
- KCP40 (66)
- KCP40B (71)
- KCPK05 (73)
- KCS10 (18)
- KCS10B (77)
- KCU10 (80)
- KCU10B (80)
- KCU25 (80)
- KCU25B (80)
- KD1400 (41)
- KD1405 (38)
- KD1425 (47)
- KS15 (18)
- KT315 (56)
- KT325 (18)
- KTP10 (56)
- KTP25S (48)
- KY1540 (18)
- KY1615 (11)
- KY3500 (69)
- KY4300 (44)
- KY4400 (68)
- KYHK15B (72)
- KYK10 (35)
- KYK25 (57)
- KYS25 (21)
- KYS30 (38)
- X00580 (18)
- X00581 (18)
- X00582 (18)
- X00583 (18)
- X00584 (18)
- X00585 (18)
- X00586 (18)
- X00591 (18)
- X00592 (18)
- X00593 (18)
- X00594 (18)
- X00596 (18)
- X00597 (18)
- X00599 (18)
Hand Of Tool
Hand Of Tool
- L (28)
- R (52)
Wiper Insert
Wiper Insert
- N (80)
- Y (43)
F Dimension
F Dimension
- 16.25 mm(3)
- 19.05 mm(2)
- 19.425 mm(5)
- 22.0 mm(1)
- 22.6 mm(10)
- 25.401 mm(4)
- 25.776 mm(4)
- 27.0 mm(1)
- 28.576 mm(7)
- 31.75 mm(2)
- 32.525 mm(12)
- 33.65 mm(3)
- 34.926 mm(4)
- 35.0 mm(3)
- 38.875 mm(11)
- 38.901 mm(1)
- 44.45 mm(7)
to
F Dimension
F Dimension
- 0.64 in(3)
- 0.75 in(2)
- 0.765 in(5)
- 0.866 in(1)
- 0.89 in(10)
- 1.0 in(4)
- 1.016 in(4)
- 1.063 in(1)
- 1.125 in(7)
- 1.25 in(2)
- 1.281 in(12)
- 1.325 in(3)
- 1.375 in(4)
- 1.379 in(3)
- 1.532 in(12)
- 1.75 in(7)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 30.475 mm(3)
- 33.025 mm(2)
- 37.35 mm(5)
- 40.0 mm(1)
- 43.301 mm(4)
- 44.7 mm(10)
- 50.0 mm(1)
- 50.801 mm(7)
- 51.051 mm(4)
- 57.151 mm(2)
- 60.95 mm(12)
- 63.0 mm(3)
- 63.5 mm(5)
- 67.3 mm(2)
- 76.95 mm(12)
- 82.551 mm(7)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2 in(3)
- 1.3 in(2)
- 1.47 in(5)
- 1.575 in(1)
- 1.705 in(4)
- 1.76 in(10)
- 1.969 in(1)
- 2.0 in(7)
- 2.011 in(4)
- 2.25 in(2)
- 2.4 in(12)
- 2.48 in(3)
- 2.5 in(5)
- 2.65 in(2)
- 3.031 in(12)
- 3.25 in(7)
to
Cutting Direction
Cutting Direction
- B (32)
- E (48)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (73)
- NEGATIVE-ZERO (7)
Maximum Bore Depth
Maximum Bore Depth
- 4.0 in(5)
- 4.992 in(1)
- 5.0 in(8)
- 5.039 in(1)
- 6.0 in(17)
- 6.299 in(1)
- 7.0 in(6)
- 7.875 in(3)
- 8.0 in(19)
- 10.0 in(19)
to
Maximum Bore Depth
Maximum Bore Depth
- 101.601 mm(5)
- 126.801 mm(1)
- 127.0 mm(8)
- 128.0 mm(1)
- 152.4 mm(17)
- 160.0 mm(1)
- 177.8 mm(6)
- 200.0 mm(3)
- 203.201 mm(19)
- 254.0 mm(19)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (33)
- D-DIAMOND/RHOMBIC 55 (16)
- S-SQUARE 90 (6)
- T-TRIANGLE 60 (5)
- V-DIAMOND/RHOMBIC 35 (13)
- W-TRIGON 80 (7)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (54)
- B L (51)
- C A (72)
- C N (69)
- D P (48)
- H T (56)
- H W (80)
Back-End
Back-End Diameter
Back-End Diameter
- 25.401 mm(5)
- 31.701 mm(1)
- 31.75 mm(8)
- 32.0 mm(1)
- 38.1 mm(17)
- 40.0 mm(1)
- 44.45 mm(6)
- 50.0 mm(3)
- 50.801 mm(19)
- 63.5 mm(19)
to
Back-End Diameter
Back-End Diameter
- 1.0 in(5)
- 1.248 in(1)
- 1.25 in(8)
- 1.26 in(1)
- 1.5 in(17)
- 1.575 in(1)
- 1.75 in(6)
- 1.969 in(3)
- 2.0 in(19)
- 2.5 in(19)
to
No filters matching ""
