Heavy Metal Boring Bars

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (35)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (35)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (35)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (35)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (35)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (35)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (35)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (35)
  • M Stainless Steel (35)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (35)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (35)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (35)
  • K Cast Iron (35)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (35)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (35)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (35)
  • N Non-Ferrous Materials (35)
    • N1
      Wrought Aluminum (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (35)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (34)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (35)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (35)
    • N6
      Carbon, Graphite Composites, CFRP (35)
    • N7
      MMC's (35)
  • S High-Temp Alloys (35)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (35)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (35)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (35)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (35)
  • H Hardened Materials (34)
    • H1
      Hardened Materials 44-48 HRC (34)
    • H2
      Hardened Materials 48-55 HRC (34)
    • H3
      Hardened Materials 56-60 HRC (34)
    • H4
      Hardened Materials >60 HRC (34)
  • C CFRP Materials (35)
    • C1
      CFRP, CFRP / CFRP (35)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (35)
Applications
Applications
  • Multiple Direction Cutting Multiple Direction Cutting (35)
  • Profiling Profiling (33)
  • TRN Boring TRN Boring (35)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (35)
  • Lightly Interrupted Cut (35)
  • Smooth Cut (35)
  • Varying Depth of Cut (35)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (10)
  • 93.0 (7)
  • 95.0 (18)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (34)
  • 2.0 (29)
  • 3.0 (6)
  • 4.0 (22)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 4.852 in (1)
  • 4.912 in (1)
  • 5.875 in (1)
  • 5.995 in (2)
  • 6.059 in (6)
  • 7.133 in (3)
  • 7.212 in (1)
  • 7.928 in (5)
  • 7.96 in (4)
  • 7.974 in (2)
  • 7.992 in (3)
  • 8.012 in (2)
  • 8.05 in (1)
  • 8.083 in (1)
  • 9.941 in (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 123.25 mm (1)
  • 124.75 mm (1)
  • 149.201 mm (1)
  • 152.275 mm (2)
  • 153.9 mm (6)
  • 181.175 mm (3)
  • 183.175 mm (1)
  • 201.375 mm (5)
  • 202.175 mm (4)
  • 202.55 mm (2)
  • 203.0 mm (3)
  • 203.5 mm (2)
  • 204.476 mm (1)
  • 205.3 mm (1)
  • 252.5 mm (2)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (33)
  • 0.008 in (35)
  • 0.016 in (35)
  • 0.031 in (35)
  • 0.047 in (11)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (33)
  • 0.2 mm (35)
  • 0.4 mm (35)
  • 0.8 mm (35)
  • 1.201 mm (11)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (35)
  • K68 (35)
  • KB1345 (5)
  • KB1610 (27)
  • KB1625 (2)
  • KB1630 (14)
  • KB5610 (26)
  • KB5625 (12)
  • KB5630 (13)
  • KB9610 (21)
  • KBH20 (18)
  • KC250 (17)
  • KC5010 (35)
  • KC5025 (35)
  • KC5410 (35)
  • KC710 (13)
  • KC720 (35)
  • KC730 (35)
  • KC7310 (13)
  • KC732 (34)
  • KC8050 (35)
  • KC810 (35)
  • KC850 (35)
  • KC9010 (29)
  • KC9025 (35)
  • KC910 (35)
  • KC9105 (29)
  • KC9110 (35)
  • KC9120 (28)
  • KC9125 (35)
  • KC9225 (35)
  • KC9240 (35)
  • KC9240NEW (34)
  • KC9315 (35)
  • KC9320 (29)
  • KC9325 (28)
  • KC935 (35)
  • KC950 (29)
  • KC990 (34)
  • KCD25 (34)
  • KCK05 (35)
  • KCK05B (1)
  • KCK15 (29)
  • KCK15B (28)
  • KCK20 (35)
  • KCK20B (34)
  • KCM15 (35)
  • KCM15B (23)
  • KCM25 (35)
  • KCM25B (28)
  • KCM35 (11)
  • KCP05 (35)
  • KCP10 (35)
  • KCP10B (35)
  • KCP25 (35)
  • KCP25B (35)
  • KCP25C (35)
  • KCP30 (30)
  • KCPK05 (13)
  • KCS10 (35)
  • KCS10B (34)
  • KCU10 (35)
  • KCU10B (35)
  • KCU25 (35)
  • KCU25B (35)
  • KD050 (23)
  • KD100 (29)
  • KD105 (22)
  • KD120 (23)
  • KD1400 (34)
  • KD1405 (29)
  • KD1425 (34)
  • KT125 (17)
  • KT150 (17)
  • KT175 (34)
  • KT315 (35)
  • KTP10 (35)
  • KU10 (27)
  • KU10T (34)
  • KU30T (28)
  • SPMQMA (4)
Hand Of Tool
Hand Of Tool
  • L (9)
  • R (26)
Wiper Insert
Wiper Insert
  • N (35)
  • Y (25)
F Dimension
F Dimension
  • 5.551 mm (2)
  • 6.0 mm (2)
  • 6.351 mm (4)
  • 7.0 mm (1)
  • 7.926 mm (4)
  • 9.0 mm (4)
  • 9.525 mm (2)
  • 10.3 mm (5)
  • 11.0 mm (2)
  • 11.101 mm (1)
  • 12.701 mm (5)
  • 14.275 mm (1)
  • 16.25 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.219 in (2)
  • 0.237 in (2)
  • 0.25 in (4)
  • 0.276 in (1)
  • 0.312 in (4)
  • 0.354 in (4)
  • 0.375 in (2)
  • 0.406 in (5)
  • 0.433 in (2)
  • 0.437 in (1)
  • 0.5 in (5)
  • 0.562 in (1)
  • 0.64 in (2)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 10.55 mm (2)
  • 11.0 mm (2)
  • 12.201 mm (4)
  • 13.0 mm (1)
  • 15.25 mm (6)
  • 16.0 mm (4)
  • 18.55 mm (1)
  • 19.55 mm (5)
  • 20.0 mm (2)
  • 21.6 mm (1)
  • 23.625 mm (4)
  • 24.901 mm (1)
  • 30.475 mm (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.416 in (2)
  • 0.433 in (2)
  • 0.48 in (4)
  • 0.512 in (1)
  • 0.6 in (6)
  • 0.63 in (4)
  • 0.73 in (1)
  • 0.77 in (5)
  • 0.787 in (2)
  • 0.85 in (1)
  • 0.93 in (4)
  • 0.98 in (1)
  • 1.2 in (2)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (18)
  • E (17)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (28)
  • NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
  • 1.563 in (2)
  • 1.575 in (2)
  • 1.875 in (6)
  • 1.969 in (1)
  • 2.362 in (4)
  • 2.5 in (5)
  • 3.125 in (6)
  • 3.15 in (2)
  • 3.75 in (5)
  • 5.0 in (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 39.7 mm (2)
  • 40.0 mm (2)
  • 47.625 mm (6)
  • 50.0 mm (1)
  • 60.0 mm (4)
  • 63.5 mm (5)
  • 79.375 mm (6)
  • 80.0 mm (2)
  • 95.25 mm (5)
  • 127.0 mm (2)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (22)
  • D-DIAMOND/RHOMBIC 55 (7)
  • T-TRIANGLE 60 (6)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (28)
  • B L (34)
  • D P (34)
  • H T (35)
  • H W (35)
Back-End
Back-End Diameter
Back-End Diameter
  • 7.95 mm (2)
  • 8.0 mm (2)
  • 9.525 mm (6)
  • 10.0 mm (1)
  • 12.0 mm (4)
  • 12.701 mm (5)
  • 15.875 mm (6)
  • 16.0 mm (2)
  • 19.05 mm (5)
  • 25.401 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.313 in (2)
  • 0.315 in (2)
  • 0.375 in (6)
  • 0.394 in (1)
  • 0.473 in (4)
  • 0.5 in (5)
  • 0.625 in (6)
  • 0.63 in (2)
  • 0.75 in (5)
  • 1.0 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?