Kenlever™ • P-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (75)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(75)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(75)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(75)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(75)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(75)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(75)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(75)
- M Stainless Steel (75)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(75)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(75)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(75)
- K Cast Iron (75)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(75)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(75)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(75)
- N Non-Ferrous Materials (75)
- N1Wrought Aluminum (75)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(75)
- N3High-Silicon Aluminum Alloys Si >12.2%(50)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (75)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (75)
- N6Carbon, Graphite Composites, CFRP (75)
- N7MMC's (60)
- S High-Temp Alloys (75)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(75)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(75)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(75)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(75)
- H Hardened Materials (60)
- H1Hardened Materials 44-48 HRC(60)
- H2Hardened Materials 48-55 HRC(60)
- H3Hardened Materials 56-60 HRC(60)
- H4Hardened Materials >60 HRC(57)
- C CFRP Materials (75)
- C1CFRP, CFRP / CFRP (75)
- C2CFRP / Aluminium CFRP / Non-Ferrous (60)
Select First Choice
- CN (24)
- DE (24)
- GB (14)
Applications
Applications
Facing (45)
Multiple Direction Cutting (74)
Profiling (56)
TRN Boring (57)
Turning (45)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (75)
- Lightly Interrupted Cut (75)
- Smooth Cut (75)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 75.0 (1)
- 90.0 (5)
- 93.0 (10)
- 95.0 (59)
to
Connection Style
Connection Style
- Boring Bar Shank (30)
- KM (44)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (56)
- 2.0 (42)
- 3.0 (21)
- 4.0 (45)
- 6.0 (30)
- 8.0 (33)
to
Over All Length [L]
Over All Length [L]
- 2.757 in(2)
- 3.543 in(14)
- 3.938 in(1)
- 4.331 in(2)
- 4.921 in(8)
- 5.513 in(13)
- 6.694 in(5)
- 7.875 in(5)
- 9.843 in(5)
- 11.811 in(8)
- 13.781 in(7)
- 15.749 in(5)
to
Over All Length [L]
Over All Length [L]
- 70.0 mm(2)
- 90.0 mm(14)
- 100.0 mm(1)
- 110.0 mm(2)
- 125.0 mm(8)
- 140.0 mm(13)
- 170.0 mm(5)
- 200.0 mm(5)
- 250.0 mm(5)
- 300.0 mm(8)
- 350.0 mm(7)
- 400.0 mm(5)
to
Corner Radius
Corner Radius
- 0.004 in(53)
- 0.008 in(54)
- 0.014 in(6)
- 0.016 in(75)
- 0.024 in(18)
- 0.031 in(75)
- 0.047 in(71)
- 0.063 in(60)
- 0.094 in(3)
- 0.095 in(3)
to
Corner Radius
Corner Radius
- 0.1 mm(53)
- 0.2 mm(54)
- 0.351 mm(6)
- 0.4 mm(75)
- 0.601 mm(18)
- 0.8 mm(75)
- 1.201 mm(71)
- 1.6 mm(60)
- 2.375 mm(3)
- 2.401 mm(3)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (24)
- CW5025 (36)
- K060 (29)
- K090 (1)
- K313 (60)
- K68 (42)
- KB1340 (34)
- KB1345 (32)
- KB1610 (51)
- KB1630 (32)
- KB5610 (29)
- KB5630 (29)
- KBH10 (57)
- KBH10B (38)
- KBH20 (57)
- KBH20B (38)
- KBK35 (29)
- KC5010 (73)
- KC5025 (71)
- KC5410 (59)
- KC730 (56)
- KC850 (62)
- KC9125 (18)
- KCK05 (73)
- KCK05B (51)
- KCK15 (71)
- KCK15B (71)
- KCK20 (64)
- KCK20B (71)
- KCM15 (71)
- KCM15B (73)
- KCM25 (73)
- KCM25B (71)
- KCM35 (60)
- KCM35B (67)
- KCP05 (61)
- KCP05B (68)
- KCP10 (73)
- KCP10B (73)
- KCP25 (75)
- KCP25B (73)
- KCP25C (75)
- KCP30 (73)
- KCP30B (61)
- KCP40 (60)
- KCP40B (62)
- KCPK05 (64)
- KCS10 (29)
- KCS10B (64)
- KCU10 (75)
- KCU10B (75)
- KCU25 (71)
- KCU25B (71)
- KD1400 (32)
- KD1405 (29)
- KD1425 (50)
- KS15 (29)
- KT315 (70)
- KT325 (29)
- KTP10 (68)
- KTP25S (56)
- KY1540 (29)
- KY3500 (60)
- KY4300 (32)
- KY4400 (60)
- KYHK15B (60)
- KYK10 (33)
- KYK25 (51)
- KYS25 (30)
- KYS30 (48)
- PB100 (18)
- THM (18)
- THM-X (24)
- THMF-X (18)
- TN10P (38)
- TN10U (36)
- TN15M (36)
- TN15U (18)
- TN2000 (39)
- TN20K (36)
- TN20P (45)
- TN30M (39)
- TN30P (36)
- TN4000 (39)
- TN6010 (24)
- TTS (18)
- WBH10P (18)
- WBH10U (18)
- WBH20P (36)
- WBH30P (18)
- WDN00U (18)
- WDN25U (30)
- WK05CT (43)
- WK15CT (39)
- WK20CT (43)
- WM15CT (43)
- WM25CT (43)
- WM35CT (43)
- WP05CT (30)
- WP15CT (43)
- WP25CT (43)
- WP35CT (36)
- WS10PT (43)
- WS25PT (43)
- WU10HT (43)
- WU10PT (43)
- WU25PT (43)
- X00580 (29)
- X00581 (29)
- X00582 (29)
- X00583 (29)
- X00584 (29)
- X00585 (29)
- X00586 (29)
- X00591 (29)
- X00592 (29)
- X00593 (29)
- X00594 (29)
- X00596 (29)
- X00597 (29)
- X00599 (29)
Hand Of Tool
Hand Of Tool
- L (33)
- R (41)
Wiper Insert
Wiper Insert
- N (75)
- Y (65)
F Dimension
F Dimension
- 11.0 mm(3)
- 13.0 mm(3)
- 17.0 mm(30)
- 22.0 mm(19)
- 27.0 mm(15)
- 35.0 mm(4)
to
F Dimension
F Dimension
- 0.433 in(3)
- 0.512 in(3)
- 0.669 in(30)
- 0.866 in(19)
- 1.063 in(15)
- 1.379 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 20.0 mm(1)
- 25.0 mm(3)
- 27.0 mm(2)
- 32.0 mm(31)
- 40.0 mm(18)
- 50.0 mm(16)
- 63.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.787 in(1)
- 0.984 in(3)
- 1.063 in(2)
- 1.26 in(31)
- 1.575 in(18)
- 1.969 in(16)
- 2.48 in(4)
to
Cutting Direction
Cutting Direction
- B (58)
- E (16)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (74)
Maximum Bore Depth
Maximum Bore Depth
- 2.169 in(2)
- 2.52 in(3)
- 2.77 in(1)
- 2.955 in(1)
- 2.993 in(2)
- 3.044 in(8)
- 3.132 in(1)
- 3.15 in(5)
- 3.473 in(4)
- 3.476 in(2)
- 3.485 in(2)
- 3.789 in(2)
- 3.938 in(8)
- 4.412 in(6)
- 4.464 in(1)
- 4.612 in(4)
- 4.621 in(1)
- 4.738 in(2)
- 5.039 in(9)
- 5.883 in(4)
- 6.299 in(7)
to
Maximum Bore Depth
Maximum Bore Depth
- 55.1 mm(2)
- 64.0 mm(3)
- 70.351 mm(1)
- 75.05 mm(1)
- 76.025 mm(2)
- 77.325 mm(8)
- 79.551 mm(1)
- 80.0 mm(5)
- 88.226 mm(4)
- 88.301 mm(2)
- 88.525 mm(2)
- 96.25 mm(2)
- 100.0 mm(8)
- 112.075 mm(6)
- 113.375 mm(1)
- 117.15 mm(4)
- 117.375 mm(1)
- 120.351 mm(2)
- 128.0 mm(9)
- 149.4 mm(4)
- 160.0 mm(7)
to
Boring Bar Material
Boring Bar Material
- S (74)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (34)
- D-DIAMOND/RHOMBIC 55 (10)
- S-SQUARE 90 (1)
- T-TRIANGLE 60 (5)
- W-TRIGON 80 (25)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (55)
- B L (57)
- C A (60)
- C N (60)
- D P (56)
- H T (70)
- H W (75)
Back-End
Connection Type
Connection Type
- BORING BAR (30)
- TAPER SHANK (44)
System Size
System Size
- KM32 (2)
- KM40TS (13)
- KM50TS (7)
- KM63TS (22)
Back-End Diameter
Back-End Diameter
- 16.0 mm(3)
- 20.0 mm(3)
- 25.0 mm(8)
- 32.0 mm(12)
- 40.0 mm(20)
- 50.0 mm(7)
- 63.0 mm(22)
to
Back-End Diameter
Back-End Diameter
- 0.63 in(3)
- 0.787 in(3)
- 0.984 in(8)
- 1.26 in(12)
- 1.575 in(20)
- 1.969 in(7)
- 2.48 in(22)
to
Shank Height
Shank Height
- 0.572 in(2)
- 1.181 in(2)
to
Shank Height
Shank Height
- 14.5 mm(2)
- 30.0 mm(2)
to
Shank Width
Shank Width
- 0.591 in(2)
- 1.181 in(2)
to
Shank Width
Shank Width
- 15.0 mm(2)
- 30.0 mm(2)
to
No filters matching ""
