KM™ Quick Change Tools
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (95)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(95)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(95)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(95)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(95)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(95)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(95)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(95)
- M Stainless Steel (95)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(95)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(95)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(95)
- K Cast Iron (95)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(95)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(95)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(95)
- N Non-Ferrous Materials (95)
- N1Wrought Aluminum (95)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(95)
- N3High-Silicon Aluminum Alloys Si >12.2%(93)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (95)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (95)
- N6Carbon, Graphite Composites, CFRP (95)
- N7MMC's (95)
- S High-Temp Alloys (95)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(95)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(95)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(95)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(95)
- H Hardened Materials (95)
- H1Hardened Materials 44-48 HRC(95)
- H2Hardened Materials 48-55 HRC(95)
- H3Hardened Materials 56-60 HRC(95)
- H4Hardened Materials >60 HRC(95)
- C CFRP Materials (95)
- C1CFRP, CFRP / CFRP (95)
- C2CFRP / Aluminium CFRP / Non-Ferrous (95)
Applications
Applications
Facing (95)
Multiple Direction Cutting (95)
Profiling (90)
TRN Boring (90)
Turning (95)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (95)
- Lightly Interrupted Cut (95)
- Smooth Cut (95)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (37)
- 95.0 (58)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (93)
- 2.0 (86)
- 3.0 (9)
- 4.0 (86)
- 6.0 (9)
- 8.0 (49)
to
Over All Length [L]
Over All Length [L]
- 2.362 in(3)
- 2.757 in(8)
- 3.15 in(6)
- 3.543 in(13)
- 3.938 in(14)
- 4.331 in(16)
- 4.921 in(13)
- 5.513 in(18)
- 6.694 in(4)
to
Over All Length [L]
Over All Length [L]
- 60.0 mm(3)
- 70.0 mm(8)
- 80.0 mm(6)
- 90.0 mm(13)
- 100.0 mm(14)
- 110.0 mm(16)
- 125.0 mm(13)
- 140.0 mm(18)
- 170.0 mm(4)
to
Corner Radius
Corner Radius
- 0.004 in(93)
- 0.008 in(93)
- 0.016 in(95)
- 0.024 in(9)
- 0.031 in(95)
- 0.047 in(95)
- 0.062 in(47)
- 0.063 in(95)
- 0.094 in(39)
- 0.095 in(2)
- 0.126 in(2)
to
Corner Radius
Corner Radius
- 0.1 mm(93)
- 0.2 mm(93)
- 0.4 mm(95)
- 0.601 mm(9)
- 0.8 mm(95)
- 1.201 mm(95)
- 1.576 mm(47)
- 1.6 mm(95)
- 2.375 mm(39)
- 2.401 mm(2)
- 3.2 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- 13E (86)
- 241 (47)
- CL4 (47)
- CM2 (86)
- CM3 (47)
- CM4 (49)
- CPX (86)
- CW2 (47)
- CW2015 (86)
- CW5025 (95)
- GX (47)
- HK1500 (56)
- HT2 (47)
- HTX (47)
- K060 (84)
- K090 (86)
- K1 (47)
- K10M (95)
- K10P (95)
- K10U (93)
- K15U (93)
- K20K (95)
- K21 (47)
- K25M (95)
- K25P (93)
- K313 (95)
- K35P (48)
- K420 (86)
- K45 (84)
- K68 (86)
- KB1340 (47)
- KB1345 (84)
- KB1610 (93)
- KB1625 (84)
- KB1630 (84)
- KB5610 (93)
- KB5625 (84)
- KB5630 (84)
- KB9610 (93)
- KB9640 (56)
- KBH10 (93)
- KBH10B (84)
- KBH20 (93)
- KBH20B (84)
- KBK35 (47)
- KC210 (84)
- KC250 (86)
- KC5010 (95)
- KC5025 (95)
- KC5410 (95)
- KC5510 (95)
- KC5525 (93)
- KC710 (47)
- KC720 (95)
- KC722 (47)
- KC730 (95)
- KC7310 (95)
- KC732 (95)
- KC8050 (95)
- KC810 (95)
- KC850 (95)
- KC9010 (95)
- KC9025 (95)
- KC910 (95)
- KC9105 (95)
- KC9110 (95)
- KC9120 (95)
- KC9125 (95)
- KC9140 (95)
- KC9145 (95)
- KC9215 (95)
- KC9225 (95)
- KC9240 (95)
- KC9240NEW (95)
- KC9245 (95)
- KC9315 (95)
- KC9320 (95)
- KC9325 (95)
- KC935 (95)
- KC950 (95)
- KC990 (95)
- KCD25 (37)
- KCK05 (95)
- KCK05B (95)
- KCK15 (95)
- KCK15B (95)
- KCK20 (95)
- KCK20B (95)
- KCM15 (95)
- KCM15B (95)
- KCM25 (95)
- KCM25B (95)
- KCM35 (95)
- KCM35B (58)
- KCP05 (95)
- KCP05B (93)
- KCP10 (95)
- KCP10B (95)
- KCP25 (95)
- KCP25B (95)
- KCP25C (95)
- KCP30 (95)
- KCP30B (95)
- KCP40 (95)
- KCP40B (95)
- KCPK05 (95)
- KCS10 (47)
- KCS10B (95)
- KCU10 (95)
- KCU10B (95)
- KCU25 (95)
- KCU25B (95)
- KD050 (84)
- KD081 (84)
- KD100 (84)
- KD120 (84)
- KD1400 (93)
- KD1405 (84)
- KD1425 (93)
- KM1 (47)
- KMF (47)
- KS15 (47)
- KT1120 (47)
- KT125 (84)
- KT150 (84)
- KT175 (84)
- KT315 (93)
- KT325 (47)
- KTP10 (93)
- KTP25S (93)
- KU10T (93)
- KU30T (95)
- KY1310 (95)
- KY1320 (95)
- KY1540 (84)
- KY1615 (86)
- KY2000 (86)
- KY2100 (84)
- KY3000 (86)
- KY3400 (95)
- KY3500 (95)
- KY4000 (49)
- KY4300 (86)
- KY4400 (95)
- KYHK15B (95)
- KYK10 (93)
- KYK25 (95)
- KYK35 (95)
- KYS25 (84)
- KYS30 (93)
- NL200 (47)
- NL250 (95)
- NL300 (49)
- NL400 (58)
- NL920 (93)
- P25 (47)
- PB100 (47)
- PB170 (47)
- PB250 (47)
- PB300 (47)
- PS5 (47)
- SP0819 (58)
- SP3019 (58)
- SP4019 (95)
- THM (47)
- THM-X (47)
- THMF-X (47)
- TN10P (95)
- TN10U (93)
- TN15M (95)
- TN15U (93)
- TN2000 (56)
- TN20K (95)
- TN20P (95)
- TN30M (95)
- TN30P (95)
- TN4000 (56)
- TN5015 (95)
- TN5020 (58)
- TN5105 (93)
- TN5120 (95)
- TN6010 (84)
- TN6025 (56)
- TN7005 (93)
- TN7010 (95)
- TN7015 (95)
- TN7025 (95)
- TN7035 (58)
- TN7105 (56)
- TN7110 (95)
- TN7115 (95)
- TN7125 (58)
- TN7135 (58)
- TN8025 (95)
- TTI15 (47)
- TTR (47)
- TTS (47)
- TTX (47)
- WBH10C (93)
- WBH10P (84)
- WBH10U (93)
- WBH20P (93)
- WBH25P (84)
- WBH25U (84)
- WBH30P (84)
- WBK40U (47)
- WBK45U (84)
- WDN00U (84)
- WDN25U (93)
- WK05CT (95)
- WK15CT (56)
- WK20CT (95)
- WM15CT (95)
- WM25CT (95)
- WM35CT (95)
- WP05CT (56)
- WP15CT (95)
- WP25CT (95)
- WP35CT (95)
- WS10PT (95)
- WS25PT (95)
- WU10HT (95)
- WU10PT (56)
- WU25PT (56)
- X00511 (47)
- X00580 (47)
- X00581 (47)
- X00582 (47)
- X00583 (47)
- X00584 (47)
- X00585 (47)
- X00586 (47)
- X00591 (47)
- X00592 (47)
- X00593 (47)
- X00594 (47)
- X00596 (47)
- X00597 (47)
- X00599 (47)
Hand Of Tool
Hand Of Tool
- L (46)
- R (49)
Wiper Insert
Wiper Insert
- N (95)
- Y (93)
F Dimension
F Dimension
- 17.0 mm(31)
- 22.0 mm(30)
- 27.0 mm(24)
- 35.0 mm(10)
to
F Dimension
F Dimension
- 0.669 in(31)
- 0.866 in(30)
- 1.063 in(24)
- 1.379 in(10)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(31)
- 40.0 mm(30)
- 50.0 mm(24)
- 63.0 mm(10)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.26 in(31)
- 1.575 in(30)
- 1.969 in(24)
- 2.48 in(10)
to
Cutting Direction
Cutting Direction
- B (58)
- E (28)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (92)
- DOUBLE POSITIVE (3)
Maximum Bore Depth
Maximum Bore Depth
- 1.508 in(3)
- 1.938 in(2)
- 1.986 in(2)
- 2.169 in(4)
- 2.283 in(1)
- 2.362 in(1)
- 2.382 in(4)
- 2.444 in(3)
- 2.775 in(4)
- 2.953 in(2)
- 2.955 in(6)
- 2.993 in(4)
- 3.037 in(4)
- 3.2 in(4)
- 3.434 in(6)
- 3.473 in(4)
- 3.593 in(2)
- 3.594 in(2)
- 3.781 in(6)
- 3.789 in(5)
- 4.11 in(4)
- 4.412 in(4)
- 4.612 in(4)
- 4.738 in(8)
- 5.513 in(2)
- 5.883 in(4)
to
Maximum Bore Depth
Maximum Bore Depth
- 38.301 mm(3)
- 49.225 mm(2)
- 50.45 mm(2)
- 55.1 mm(4)
- 58.0 mm(1)
- 60.0 mm(1)
- 60.475 mm(4)
- 62.075 mm(3)
- 70.476 mm(4)
- 75.0 mm(2)
- 75.05 mm(6)
- 76.025 mm(4)
- 77.15 mm(4)
- 81.25 mm(4)
- 87.226 mm(6)
- 88.226 mm(4)
- 91.25 mm(2)
- 91.275 mm(2)
- 96.025 mm(6)
- 96.25 mm(5)
- 104.4 mm(4)
- 112.075 mm(4)
- 117.15 mm(4)
- 120.351 mm(8)
- 140.0 mm(2)
- 149.4 mm(4)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (49)
- D-DIAMOND/RHOMBIC 55 (37)
- W-TRIGON 80 (9)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.177 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 4.5 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (93)
- B L (93)
- C A (95)
- C N (95)
- D P (93)
- H T (93)
- H W (95)
Back-End
System Size
System Size
- KM32 (3)
- KM32TS (1)
- KM40TS (20)
- KM50TS (42)
- KM63TS (29)
Back-End Diameter
Back-End Diameter
- 32.0 mm(4)
- 40.0 mm(20)
- 50.0 mm(42)
- 63.0 mm(29)
to
Back-End Diameter
Back-End Diameter
- 1.26 in(4)
- 1.575 in(20)
- 1.969 in(42)
- 2.48 in(29)
to
No filters matching ""
