Modular Boring Bars with Serrated Interface

These boring bars utilize a new portfolio of bolt-on heads that connect to the bar by a serrated design.

  • Short design bolt-on heads result in low weight, providing high stability and consistent repeatability.
  • Serrated design interface provides higher connection strengths, enabling an increased accuracy of insert positioning.
  • Vibration-Free boring bars provide stability and rigidity when boring at extended overhangs up to 10xD.
  • Vibration-Free boring bars are a plug-and-play solution designed to work out of the box with no manual adjusting required or possible. The internal dampening package is designed to provide process stability by increasing the stiffness of the bar and dampening out chatter.
Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (104)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (104)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (104)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (104)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (104)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (104)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (104)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (104)
  • M Stainless Steel (104)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (104)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (104)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (104)
  • K Cast Iron (104)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (104)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (104)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (104)
  • N Non-Ferrous Materials (103)
    • N1
      Wrought Aluminum (103)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (103)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (73)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (103)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (103)
    • N6
      Carbon, Graphite Composites, CFRP (103)
    • N7
      MMC's (99)
  • S High-Temp Alloys (104)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (104)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (104)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (104)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (104)
  • H Hardened Materials (93)
    • H1
      Hardened Materials 44-48 HRC (93)
    • H2
      Hardened Materials 48-55 HRC (86)
    • H3
      Hardened Materials 56-60 HRC (86)
    • H4
      Hardened Materials >60 HRC (76)
  • C CFRP Materials (86)
    • C1
      CFRP, CFRP / CFRP (86)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (82)
Applications
Applications
  • ID Grooving ID Grooving (11)
  • ID Thread Turning ID Thread Turning (11)
  • TRN Boring TRN Boring (11)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (16)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (97)
  • Interrupted (46)
  • Lightly Interrupted Cut (97)
  • Smooth Cut (97)
  • Varying Depth of Cut (97)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 62.5 (2)
  • 90.0 (34)
  • 93.0 (34)
  • 95.0 (32)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (104)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (68)
  • 2.0 (73)
  • 3.0 (27)
  • 4.0 (46)
  • 6.0 (14)
  • 8.0 (24)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 0.696 in (12)
  • 0.734 in (2)
  • 0.892 in (6)
  • 0.971 in (4)
  • 0.994 in (1)
  • 1.01 in (2)
  • 1.049 in (2)
  • 1.246 in (6)
  • 1.27 in (3)
  • 1.285 in (12)
  • 1.348 in (4)
  • 1.364 in (14)
  • 1.389 in (7)
  • 1.405 in (24)
  • 1.463 in (1)
  • 1.522 in (3)
  • 1.561 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 17.651 mm (12)
  • 18.651 mm (2)
  • 22.651 mm (6)
  • 24.651 mm (4)
  • 25.25 mm (1)
  • 25.651 mm (2)
  • 26.651 mm (2)
  • 31.651 mm (6)
  • 32.25 mm (3)
  • 32.65 mm (12)
  • 34.25 mm (4)
  • 34.65 mm (14)
  • 35.25 mm (7)
  • 35.65 mm (24)
  • 37.15 mm (1)
  • 38.651 mm (3)
  • 39.651 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.001 in (14)
  • 0.002 in (40)
  • 0.003 in (14)
  • 0.004 in (76)
  • 0.005 in (8)
  • 0.006 in (14)
  • 0.007 in (10)
  • 0.008 in (80)
  • 0.01 in (10)
  • 0.011 in (8)
  • 0.012 in (10)
  • 0.014 in (18)
  • 0.016 in (93)
  • 0.017 in (2)
  • 0.019 in (10)
  • 0.02 in (8)
  • 0.021 in (1)
  • 0.023 in (10)
  • 0.027 in (1)
  • 0.028 in (4)
  • 0.031 in (92)
  • 0.033 in (1)
  • 0.035 in (10)
  • 0.037 in (2)
  • 0.039 in (9)
  • 0.047 in (84)
  • 0.049 in (8)
  • 0.06 in (8)
  • 0.062 in (20)
  • 0.063 in (56)
  • 0.069 in (8)
  • 0.078 in (8)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.094 in (8)
  • 0.095 in (30)
  • 0.098 in (2)
  • 0.125 in (4)
  • 0.126 in (8)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (14)
  • 0.05 mm (40)
  • 0.076 mm (14)
  • 0.1 mm (76)
  • 0.125 mm (8)
  • 0.151 mm (14)
  • 0.176 mm (10)
  • 0.2 mm (80)
  • 0.225 mm (8)
  • 0.25 mm (10)
  • 0.275 mm (8)
  • 0.301 mm (10)
  • 0.325 mm (10)
  • 0.351 mm (18)
  • 0.4 mm (93)
  • 0.426 mm (2)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (8)
  • 0.525 mm (1)
  • 0.576 mm (10)
  • 0.65 mm (1)
  • 0.701 mm (4)
  • 0.775 mm (8)
  • 0.8 mm (84)
  • 0.826 mm (1)
  • 0.9 mm (10)
  • 0.925 mm (2)
  • 1.0 mm (9)
  • 1.201 mm (84)
  • 1.25 mm (8)
  • 1.5 mm (8)
  • 1.576 mm (20)
  • 1.6 mm (56)
  • 1.75 mm (8)
  • 1.975 mm (8)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.375 mm (8)
  • 2.401 mm (30)
  • 2.5 mm (2)
  • 3.176 mm (4)
  • 3.2 mm (8)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (46)
  • 241 (12)
  • CL4 (32)
  • CM2 (44)
  • CM3 (34)
  • CM4 (28)
  • CPX (42)
  • CW2 (30)
  • GH1 (8)
  • GX (16)
  • HT2 (54)
  • HTX (50)
  • K00331 (4)
  • K060 (24)
  • K090 (46)
  • K1 (16)
  • K1010P (8)
  • K10M (74)
  • K10P (60)
  • K10U (66)
  • K15U (66)
  • K20K (66)
  • K21 (26)
  • K25M (60)
  • K25P (52)
  • K2885 (8)
  • K313 (92)
  • K35P (28)
  • K420 (49)
  • K45 (30)
  • K4H (8)
  • K68 (91)
  • KB1340 (16)
  • KB1345 (48)
  • KB1610 (50)
  • KB1625 (44)
  • KB1630 (44)
  • KB5610 (44)
  • KB5625 (62)
  • KB5630 (38)
  • KB9610 (62)
  • KB9640 (16)
  • KBH10 (60)
  • KBH10B (36)
  • KBH20 (69)
  • KBH20B (36)
  • KBK35 (12)
  • KC210 (26)
  • KC250 (32)
  • KC5010 (101)
  • KC5020P (18)
  • KC5025 (102)
  • KC5410 (86)
  • KC5510 (52)
  • KC5525 (30)
  • KC710 (28)
  • KC720 (82)
  • KC722 (26)
  • KC730 (95)
  • KC7310 (54)
  • KC732 (74)
  • KC8050 (84)
  • KC810 (91)
  • KC850 (95)
  • KC9010 (72)
  • KC9025 (86)
  • KC910 (84)
  • KC9105 (83)
  • KC9110 (96)
  • KC9120 (78)
  • KC9125 (86)
  • KC9140 (54)
  • KC9145 (36)
  • KC9210 (8)
  • KC9215 (54)
  • KC9225 (86)
  • KC9240 (84)
  • KC9240NEW (84)
  • KC9245 (54)
  • KC9315 (86)
  • KC9320 (92)
  • KC9325 (72)
  • KC935 (96)
  • KC950 (82)
  • KC990 (76)
  • KCD25 (28)
  • KCK05 (86)
  • KCK05B (74)
  • KCK15 (76)
  • KCK15B (82)
  • KCK20 (94)
  • KCK20B (92)
  • KCM15 (84)
  • KCM15B (78)
  • KCM25 (86)
  • KCM25B (82)
  • KCM35 (76)
  • KCM35B (58)
  • KCP05 (80)
  • KCP05B (52)
  • KCP10 (86)
  • KCP10B (94)
  • KCP15 (4)
  • KCP25 (86)
  • KCP25B (94)
  • KCP25C (84)
  • KCP30 (84)
  • KCP30B (50)
  • KCP40 (42)
  • KCP40B (54)
  • KCPK05 (50)
  • KCS10 (44)
  • KCS10B (78)
  • KCU10 (97)
  • KCU10B (86)
  • KCU25 (93)
  • KCU25B (84)
  • KD050 (47)
  • KD081 (52)
  • KD100 (31)
  • KD120 (40)
  • KD1400 (56)
  • KD1405 (22)
  • KD1425 (64)
  • KM1 (24)
  • KMF (12)
  • KS15 (12)
  • KT1120 (16)
  • KT125 (46)
  • KT150 (28)
  • KT175 (68)
  • KT315 (88)
  • KT325 (64)
  • KT5020 (14)
  • KTP10 (70)
  • KU10 (24)
  • KU10T (84)
  • KU25T (14)
  • KU30T (92)
  • KY1310 (30)
  • KY1320 (46)
  • KY1540 (18)
  • KY1615 (46)
  • KY2000 (32)
  • KY2100 (14)
  • KY3000 (56)
  • KY3400 (34)
  • KY3500 (46)
  • KY4000 (22)
  • KY4300 (22)
  • KY4400 (46)
  • KYHK15B (46)
  • KYK10 (24)
  • KYK25 (34)
  • KYK35 (46)
  • KYS25 (16)
  • KYS30 (16)
  • NL200 (20)
  • NL250 (50)
  • NL300 (42)
  • NL400 (20)
  • NL920 (38)
  • P25 (14)
  • PS5 (24)
  • SP0819 (40)
  • SP3019 (32)
  • SP4019 (28)
  • SP4036 (4)
  • SP4093 (4)
  • SPADAP (2)
  • TN7035 (10)
  • X00511 (12)
  • X00580 (12)
  • X00581 (12)
  • X00582 (12)
  • X00583 (12)
  • X00584 (12)
  • X00585 (12)
  • X00586 (12)
  • X00591 (12)
  • X00592 (12)
  • X00593 (12)
  • X00594 (12)
  • X00596 (12)
  • X00597 (12)
  • X00599 (12)
  • YY3A00 (2)
Hand Of Tool
Hand Of Tool
  • L (47)
  • R (57)
Wiper Insert
Wiper Insert
  • N (104)
  • Y (44)
F Dimension
F Dimension
  • 17.0 mm (20)
  • 18.276 mm (1)
  • 22.0 mm (21)
  • 23.0 mm (2)
  • 23.276 mm (1)
  • 27.0 mm (27)
  • 28.276 mm (1)
  • 28.675 mm (1)
  • 35.0 mm (27)
  • 36.275 mm (1)
  • 36.676 mm (1)
  • 36.975 mm (1)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.669 in (20)
  • 0.72 in (1)
  • 0.866 in (21)
  • 0.906 in (2)
  • 0.916 in (1)
  • 1.063 in (27)
  • 1.113 in (1)
  • 1.129 in (1)
  • 1.379 in (27)
  • 1.428 in (1)
  • 1.444 in (1)
  • 1.456 in (1)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (19)
  • 33.0 mm (2)
  • 40.0 mm (24)
  • 50.0 mm (29)
  • 63.0 mm (30)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (19)
  • 1.299 in (2)
  • 1.575 in (24)
  • 1.969 in (29)
  • 2.48 in (30)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (32)
  • E (52)
  • P (2)
  • S (18)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (61)
  • NEGATIVE-ZERO (30)
  • NEUTRAL (ZERO) (13)
Maximum Bore Depth
Maximum Bore Depth
  • 3.938 in (21)
  • 5.039 in (24)
  • 6.299 in (29)
  • 7.875 in (30)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 100.0 mm (21)
  • 128.0 mm (24)
  • 160.0 mm (29)
  • 200.0 mm (30)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (104)
Front-End
Adapter Front-End
Adapter Front-End
  • BORING BAR ADAPTER (1)
Clamp Style
Clamp Style
  • D (28)
  • N (11)
  • P (26)
  • S (39)
Cutting Width
Cutting Width
  • 0.039 in (8)
  • 0.047 in (8)
  • 0.06 in (8)
  • 0.062 in (8)
  • 0.069 in (8)
  • 0.073 in (8)
  • 0.078 in (8)
  • 0.079 in (8)
  • 0.088 in (8)
  • 0.089 in (5)
  • 0.094 in (3)
  • 0.095 in (8)
  • 0.097 in (8)
  • 0.098 in (8)
  • 0.105 in (8)
  • 0.108 in (8)
  • 0.11 in (8)
  • 0.119 in (10)
  • 0.122 in (8)
  • 0.125 in (10)
  • 0.126 in (10)
  • 0.128 in (8)
  • 0.131 in (3)
  • 0.138 in (10)
  • 0.143 in (8)
  • 0.156 in (8)
  • 0.157 in (10)
  • 0.167 in (10)
  • 0.169 in (8)
  • 0.177 in (10)
  • 0.178 in (8)
  • 0.185 in (9)
  • 0.188 in (10)
  • 0.189 in (10)
  • 0.192 in (3)
  • 0.193 in (3)
  • 0.195 in (8)
  • 0.197 in (2)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.217 in (2)
  • 0.218 in (1)
  • 0.219 in (2)
  • 0.237 in (2)
  • 0.25 in (3)
  • 0.255 in (2)
  • 0.281 in (1)
  • 0.312 in (1)
  • 0.375 in (1)
  • 0.383 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.0 mm (8)
  • 1.201 mm (8)
  • 1.5 mm (8)
  • 1.576 mm (8)
  • 1.75 mm (8)
  • 1.826 mm (8)
  • 1.975 mm (8)
  • 2.0 mm (8)
  • 2.2 mm (8)
  • 2.225 mm (8)
  • 2.25 mm (5)
  • 2.375 mm (3)
  • 2.401 mm (8)
  • 2.475 mm (8)
  • 2.5 mm (8)
  • 2.676 mm (8)
  • 2.75 mm (8)
  • 2.801 mm (8)
  • 3.0 mm (10)
  • 3.1 mm (8)
  • 3.176 mm (10)
  • 3.2 mm (10)
  • 3.25 mm (8)
  • 3.325 mm (3)
  • 3.5 mm (10)
  • 3.6 mm (8)
  • 3.95 mm (8)
  • 3.975 mm (3)
  • 4.0 mm (10)
  • 4.25 mm (10)
  • 4.3 mm (8)
  • 4.5 mm (10)
  • 4.525 mm (8)
  • 4.7 mm (9)
  • 4.775 mm (10)
  • 4.801 mm (10)
  • 4.875 mm (3)
  • 4.9 mm (3)
  • 4.95 mm (8)
  • 5.0 mm (2)
  • 5.125 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (2)
  • 5.525 mm (1)
  • 5.575 mm (2)
  • 6.0 mm (2)
  • 6.351 mm (3)
  • 6.476 mm (2)
  • 7.125 mm (1)
  • 7.926 mm (1)
  • 9.525 mm (1)
  • 9.726 mm (1)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • ZYL - Cylindrical Adapter (1)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (26)
  • D-DIAMOND/RHOMBIC 55 (28)
  • LT-TRIANGLE LAY DOWN THREAD 60 (7)
  • T-TRIANGLE 60 (18)
  • TN-TOP NOTCH (11)
  • V-DIAMOND/RHOMBIC 35 (10)
  • W-TRIGON 80 (4)
Front End Style
Front End Style
  • ZYL01 Straight Shank (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.098 in (2)
  • 0.11 in (2)
  • 0.13 in (2)
  • 0.146 in (2)
  • 0.178 in (4)
  • 0.193 in (2)
  • 0.197 in (1)
  • 0.238 in (4)
  • 0.277 in (8)
  • 0.395 in (12)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 2.5 mm (2)
  • 2.801 mm (2)
  • 3.301 mm (2)
  • 3.7 mm (2)
  • 4.525 mm (4)
  • 4.9 mm (2)
  • 5.0 mm (1)
  • 6.025 mm (4)
  • 7.025 mm (8)
  • 10.025 mm (12)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.969 in (1)
  • 12.965 in (1)
  • 13.172 in (1)
  • 16.2 in (1)
  • 16.338 in (1)
  • 19.582 in (1)
  • 20.642 in (1)
  • 23.279 in (1)
  • 26.133 in (1)
  • 26.574 in (1)
  • 32.335 in (1)
  • 33.582 in (1)
  • 41.12 in (1)
  • 42.9 in (1)
  • 54.582 in (1)
  • 55.484 in (1)
Gage Length
Gage Length
  • 50 mm (1)
  • 329.3 mm (1)
  • 334.55 mm (1)
  • 411.475 mm (1)
  • 414.975 mm (1)
  • 497.375 mm (1)
  • 524.275 mm (1)
  • 591.275 mm (1)
  • 663.776 mm (1)
  • 674.975 mm (1)
  • 821.301 mm (1)
  • 852.975 mm (1)
  • 1044.45 mm (1)
  • 1089.65 mm (1)
  • 1386.375 mm (1)
  • 1409.301 mm (1)
Front End Size
Front End Size
  • 2.5 in (1)
Front End Size Min to Front End Size Max
Front End Size
Front End Size
  • 63.5 mm (1)
Front End Size Min to Front End Size Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (72)
  • B L (76)
  • C A (46)
  • C N (56)
  • D P (73)
  • H T (88)
  • H W (104)
Back-End
Connection Type
Connection Type
  • BORING BAR HEAD (104)
Back-End Diameter
Back-End Diameter
  • 25.0 mm (22)
  • 25.401 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (25)
  • 38.1 mm (1)
  • 40.0 mm (30)
  • 44.401 mm (1)
  • 50.0 mm (31)
  • 50.801 mm (1)
  • 60.0 mm (1)
  • 63.5 mm (1)
  • 76.2 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.984 in (22)
  • 1.0 in (1)
  • 1.25 in (1)
  • 1.26 in (25)
  • 1.5 in (1)
  • 1.575 in (30)
  • 1.748 in (1)
  • 1.969 in (31)
  • 2.0 in (1)
  • 2.362 in (1)
  • 2.5 in (1)
  • 3.0 in (1)
  • 3.15 in (1)
  • 3.938 in (1)
  • 4.0 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?