Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Profiling Tools

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (1439)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1439)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1439)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1439)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1439)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1439)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1439)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1439)
  • M Stainless Steel (1348)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1348)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1348)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1348)
  • K Cast Iron (1418)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1418)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1414)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1409)
  • N Non-Ferrous Materials (1441)
    • N1
      Wrought Aluminum
      (1427)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1341)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (448)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1441)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1355)
    • N6
      Carbon, Graphite Composites, CFRP
      (1341)
    • N7
      MMC's
      (347)
  • S High-Temp Alloys (1429)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1429)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1429)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1429)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1423)
  • H Hardened Materials (1131)
    • H1
      Hardened Materials 44-48 HRC
      (1131)
    • H2
      Hardened Materials 48-55 HRC
      (1015)
    • H3
      Hardened Materials 56-60 HRC
      (305)
    • H4
      Hardened Materials >60 HRC
      (305)
Select First Choice
  • BR (23)
  • CN (190)
  • DE (190)
  • GB (108)
  • IN (33)
  • SG (67)
  • US (278)
Applications
Applications
  • Back Boring Back Boring (127)
  • Boring Boring (225)
  • CRT Profiling CRT Profiling (20)
  • Chamfer Turning Chamfer Turning (15)
  • Cut-Off Cut-Off (254)
  • Deep Grooving Deep Grooving (69)
  • Face Grooving Face Grooving (942)
  • Facing Facing (150)
  • Grooving Grooving (1116)
  • ID Facing ID Facing (140)
  • ID Grooving ID Grooving (619)
  • ID Thread Turning ID Thread Turning (86)
  • Multiple Direction Cutting Multiple Direction Cutting (514)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (530)
  • Profiling Profiling (417)
  • TRN Boring TRN Boring (50)
  • Threading Threading (130)
  • Turning Turning (319)
Type of Thread
Type of Thread
  • 60 (187)
  • ACME (122)
  • API (114)
  • API RD (86)
  • BSW (78)
  • BUTTRESS (182)
  • M (114)
  • NPT (78)
  • STUB ACME (78)
  • UN (182)
  • UNJ (78)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1001)
  • Lightly Interrupted Cut (1113)
  • Smooth Cut (1231)
  • Varying Depth of Cut (1192)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (12)
  • 60.0 (4)
  • 62.5 (2)
  • 72.5 (2)
  • 90.0 (748)
  • 92.25 (27)
  • 93.0 (1)
  • 95.0 (77)
  • 100.0 (1)
  • 107.5 (9)
  • 117.5 (8)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (8)
  • Boring Bar Shank (212)
  • Toolholder (468)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (740)
  • 2.0 (1122)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (78)
  • 0.003 in (187)
  • 0.004 in (146)
  • 0.005 in (154)
  • 0.006 in (114)
  • 0.007 in (150)
  • 0.008 in (651)
  • 0.01 in (150)
  • 0.011 in (78)
  • 0.012 in (142)
  • 0.014 in (117)
  • 0.016 in (664)
  • 0.017 in (78)
  • 0.019 in (114)
  • 0.02 in (233)
  • 0.023 in (117)
  • 0.03 in (70)
  • 0.031 in (661)
  • 0.033 in (11)
  • 0.034 in (50)
  • 0.035 in (114)
  • 0.039 in (350)
  • 0.041 in (118)
  • 0.046 in (18)
  • 0.047 in (372)
  • 0.048 in (14)
  • 0.049 in (147)
  • 0.06 in (286)
  • 0.061 in (47)
  • 0.062 in (92)
  • 0.063 in (399)
  • 0.065 in (45)
  • 0.069 in (147)
  • 0.078 in (93)
  • 0.079 in (218)
  • 0.08 in (57)
  • 0.081 in (49)
  • 0.089 in (114)
  • 0.094 in (123)
  • 0.095 in (159)
  • 0.096 in (48)
  • 0.098 in (122)
  • 0.099 in (46)
  • 0.1 in (41)
  • 0.119 in (80)
  • 0.12 in (84)
  • 0.125 in (181)
  • 0.128 in (37)
  • 0.156 in (40)
  • 0.157 in (40)
  • 0.158 in (44)
  • 0.159 in (27)
  • 0.187 in (8)
  • 0.188 in (33)
  • 0.197 in (10)
  • 0.198 in (12)
  • 0.25 in (13)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (78)
  • 0.076 mm (187)
  • 0.1 mm (146)
  • 0.125 mm (154)
  • 0.151 mm (114)
  • 0.176 mm (150)
  • 0.2 mm (651)
  • 0.225 mm (78)
  • 0.25 mm (150)
  • 0.275 mm (78)
  • 0.301 mm (142)
  • 0.325 mm (117)
  • 0.351 mm (114)
  • 0.4 mm (664)
  • 0.426 mm (78)
  • 0.45 mm (114)
  • 0.476 mm (40)
  • 0.5 mm (233)
  • 0.576 mm (117)
  • 0.75 mm (70)
  • 0.775 mm (209)
  • 0.8 mm (452)
  • 0.826 mm (11)
  • 0.851 mm (50)
  • 0.9 mm (114)
  • 1.0 mm (350)
  • 1.05 mm (118)
  • 1.175 mm (18)
  • 1.201 mm (372)
  • 1.225 mm (14)
  • 1.25 mm (147)
  • 1.5 mm (278)
  • 1.526 mm (71)
  • 1.55 mm (47)
  • 1.576 mm (92)
  • 1.6 mm (399)
  • 1.651 mm (45)
  • 1.75 mm (147)
  • 1.975 mm (93)
  • 2.0 mm (218)
  • 2.025 mm (57)
  • 2.051 mm (49)
  • 2.25 mm (114)
  • 2.375 mm (123)
  • 2.401 mm (159)
  • 2.45 mm (48)
  • 2.5 mm (122)
  • 2.526 mm (46)
  • 2.551 mm (41)
  • 3.0 mm (80)
  • 3.026 mm (43)
  • 3.051 mm (41)
  • 3.176 mm (181)
  • 3.25 mm (37)
  • 3.95 mm (25)
  • 3.975 mm (15)
  • 4.0 mm (40)
  • 4.025 mm (44)
  • 4.05 mm (27)
  • 4.75 mm (8)
  • 4.775 mm (33)
  • 5.0 mm (10)
  • 5.025 mm (12)
  • 6.351 mm (13)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (1013)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (1013)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (272)
  • Lightly Interrupted Cut (332)
  • Smooth Cut (450)
  • Varying Depth of Cut (411)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00326 (29)
  • K1 (5)
  • K1025 (100)
  • K2885 (146)
  • K313 (864)
  • K420 (262)
  • K4H (110)
  • K6 (4)
  • K68 (341)
  • K8735 (29)
  • KB1345 (139)
  • KB1630 (305)
  • KB5625 (265)
  • KBH20 (227)
  • KC250 (233)
  • KC5010 (715)
  • KC5025 (667)
  • KC5410 (328)
  • KC5510 (20)
  • KC710 (182)
  • KC720 (216)
  • KC722 (182)
  • KC730 (414)
  • KC7310 (139)
  • KC732 (224)
  • KC8050 (152)
  • KC810 (298)
  • KC850 (353)
  • KC9025 (94)
  • KC910 (251)
  • KC9105 (62)
  • KC9110 (560)
  • KC9120 (112)
  • KC9125 (366)
  • KC9225 (152)
  • KC9315 (89)
  • KC9320 (182)
  • KC935 (328)
  • KC950 (276)
  • KCD25 (29)
  • KCK05 (37)
  • KCK15B (31)
  • KCK20 (357)
  • KCK20B (425)
  • KCM15B (59)
  • KCM25 (100)
  • KCM25B (5)
  • KCM35B (162)
  • KCP05 (93)
  • KCP10 (376)
  • KCP10B (497)
  • KCP25 (377)
  • KCP25B (547)
  • KCS10 (56)
  • KCS10B (89)
  • KCU10 (1024)
  • KCU25 (979)
  • KD050 (122)
  • KD081 (107)
  • KD100 (191)
  • KD120 (200)
  • KD1405 (152)
  • KD1425 (179)
  • KMS (101)
  • KS15 (29)
  • KT125 (82)
  • KT150 (87)
  • KT175 (199)
  • KT315 (575)
  • KU10 (264)
  • KU10T (182)
  • KU25T (182)
  • KU30T (369)
  • KY3000 (114)
  • KY3500 (214)
  • KYS30 (90)
  • SP88F8 (36)
Hand Of Tool
Hand Of Tool
  • L (308)
  • N (13)
  • R (382)
Wiper Insert
Wiper Insert
  • N (1564)
F Dimension
F Dimension
  • 6.551 mm (2)
  • 7.0 mm (2)
  • 8.225 mm (2)
  • 8.525 mm (4)
  • 8.875 mm (2)
  • 9.0 mm (6)
  • 9.4 mm (2)
  • 9.525 mm (6)
  • 10.976 mm (2)
  • 11.0 mm (11)
  • 11.05 mm (7)
  • 11.101 mm (2)
  • 12.101 mm (2)
  • 12.175 mm (2)
  • 12.576 mm (6)
  • 12.701 mm (9)
  • 12.726 mm (3)
  • 12.75 mm (2)
  • 12.8 mm (4)
  • 12.851 mm (2)
  • 12.9 mm (2)
  • 13.0 mm (17)
  • 13.025 mm (2)
  • 13.951 mm (2)
  • 13.976 mm (4)
  • 14.0 mm (2)
  • 14.15 mm (2)
  • 14.275 mm (10)
  • 15.875 mm (6)
  • 15.976 mm (4)
  • 16.0 mm (7)
  • 16.2 mm (5)
  • 16.225 mm (2)
  • 16.25 mm (2)
  • 16.875 mm (5)
  • 17.0 mm (15)
  • 17.3 mm (6)
  • 17.35 mm (2)
  • 17.475 mm (4)
  • 17.5 mm (2)
  • 18.925 mm (2)
  • 19.05 mm (9)
  • 19.075 mm (11)
  • 19.125 mm (12)
  • 19.225 mm (4)
  • 19.25 mm (2)
  • 19.425 mm (2)
  • 20.0 mm (4)
  • 20.05 mm (8)
  • 20.1 mm (27)
  • 20.201 mm (26)
  • 20.3 mm (2)
  • 21.125 mm (4)
  • 22.0 mm (14)
  • 22.225 mm (3)
  • 22.6 mm (2)
  • 25.0 mm (14)
  • 25.05 mm (8)
  • 25.1 mm (12)
  • 25.201 mm (10)
  • 25.3 mm (2)
  • 25.35 mm (2)
  • 25.401 mm (21)
  • 25.425 mm (10)
  • 25.475 mm (14)
  • 25.5 mm (4)
  • 25.576 mm (5)
  • 25.701 mm (2)
  • 25.8 mm (2)
  • 25.901 mm (2)
  • 26.0 mm (2)
  • 26.225 mm (2)
  • 27.0 mm (5)
  • 28.576 mm (3)
  • 29.875 mm (3)
  • 30.0 mm (8)
  • 31.75 mm (32)
  • 31.826 mm (10)
  • 31.925 mm (4)
  • 32.0 mm (25)
  • 32.051 mm (4)
  • 32.075 mm (8)
  • 32.15 mm (2)
  • 32.176 mm (4)
  • 32.25 mm (2)
  • 32.301 mm (4)
  • 32.4 mm (2)
  • 32.525 mm (2)
  • 32.575 mm (2)
  • 32.65 mm (2)
  • 34.926 mm (4)
  • 35.0 mm (2)
  • 38.1 mm (19)
  • 38.176 mm (2)
  • 38.275 mm (2)
  • 38.401 mm (2)
  • 38.5 mm (2)
  • 40.0 mm (4)
  • 41.276 mm (5)
  • 50.801 mm (7)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.258 in (2)
  • 0.276 in (2)
  • 0.324 in (2)
  • 0.336 in (4)
  • 0.35 in (2)
  • 0.354 in (6)
  • 0.37 in (2)
  • 0.375 in (6)
  • 0.432 in (2)
  • 0.433 in (11)
  • 0.435 in (7)
  • 0.437 in (2)
  • 0.477 in (2)
  • 0.48 in (2)
  • 0.495 in (6)
  • 0.5 in (9)
  • 0.501 in (3)
  • 0.502 in (2)
  • 0.504 in (4)
  • 0.506 in (2)
  • 0.508 in (2)
  • 0.512 in (17)
  • 0.513 in (2)
  • 0.549 in (2)
  • 0.55 in (4)
  • 0.551 in (2)
  • 0.557 in (2)
  • 0.562 in (10)
  • 0.625 in (6)
  • 0.629 in (4)
  • 0.63 in (7)
  • 0.638 in (5)
  • 0.639 in (2)
  • 0.64 in (2)
  • 0.664 in (5)
  • 0.669 in (15)
  • 0.681 in (6)
  • 0.683 in (2)
  • 0.689 in (4)
  • 0.69 in (2)
  • 0.745 in (2)
  • 0.75 in (9)
  • 0.751 in (11)
  • 0.753 in (12)
  • 0.757 in (4)
  • 0.758 in (2)
  • 0.765 in (2)
  • 0.787 in (4)
  • 0.789 in (8)
  • 0.791 in (27)
  • 0.795 in (26)
  • 0.799 in (2)
  • 0.833 in (4)
  • 0.866 in (14)
  • 0.875 in (3)
  • 0.89 in (2)
  • 0.984 in (14)
  • 0.986 in (8)
  • 0.988 in (12)
  • 0.992 in (10)
  • 0.996 in (2)
  • 0.998 in (2)
  • 1.0 in (21)
  • 1.002 in (10)
  • 1.004 in (18)
  • 1.008 in (5)
  • 1.012 in (2)
  • 1.016 in (3)
  • 1.02 in (3)
  • 1.024 in (2)
  • 1.032 in (2)
  • 1.063 in (5)
  • 1.125 in (3)
  • 1.176 in (3)
  • 1.181 in (8)
  • 1.25 in (32)
  • 1.254 in (10)
  • 1.258 in (4)
  • 1.26 in (25)
  • 1.262 in (4)
  • 1.264 in (8)
  • 1.266 in (2)
  • 1.268 in (4)
  • 1.27 in (2)
  • 1.272 in (4)
  • 1.276 in (2)
  • 1.281 in (2)
  • 1.282 in (2)
  • 1.285 in (2)
  • 1.375 in (4)
  • 1.379 in (2)
  • 1.5 in (19)
  • 1.504 in (2)
  • 1.508 in (2)
  • 1.512 in (2)
  • 1.516 in (2)
  • 1.52 in (2)
  • 1.575 in (4)
  • 1.625 in (5)
  • 2.0 in (7)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (88)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 15.875 mm (4)
  • 16.0 mm (12)
  • 16.776 mm (2)
  • 17.0 mm (3)
  • 17.026 mm (2)
  • 18.5 mm (2)
  • 18.55 mm (4)
  • 19.05 mm (1)
  • 20.0 mm (21)
  • 20.326 mm (1)
  • 21.0 mm (3)
  • 22.0 mm (3)
  • 22.85 mm (4)
  • 24.901 mm (6)
  • 25.0 mm (33)
  • 25.401 mm (6)
  • 26.0 mm (7)
  • 26.925 mm (1)
  • 28.576 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (20)
  • 33.025 mm (5)
  • 34.0 mm (4)
  • 34.926 mm (6)
  • 36.0 mm (5)
  • 38.0 mm (1)
  • 38.1 mm (8)
  • 40.0 mm (14)
  • 41.301 mm (39)
  • 42.0 mm (5)
  • 44.0 mm (6)
  • 44.45 mm (2)
  • 45.051 mm (1)
  • 46.475 mm (1)
  • 47.6 mm (39)
  • 48.0 mm (3)
  • 50.0 mm (6)
  • 50.801 mm (4)
  • 52.0 mm (14)
  • 53.85 mm (1)
  • 54.0 mm (4)
  • 55.875 mm (3)
  • 56.625 mm (29)
  • 57.151 mm (6)
  • 57.2 mm (15)
  • 58.0 mm (4)
  • 60.0 mm (4)
  • 60.325 mm (4)
  • 63.0 mm (1)
  • 63.5 mm (22)
  • 64.0 mm (4)
  • 65.0 mm (1)
  • 68.0 mm (4)
  • 69.851 mm (4)
  • 70.0 mm (8)
  • 76.2 mm (8)
  • 80.0 mm (7)
  • 82.551 mm (4)
  • 88.9 mm (117)
  • 90.0 mm (8)
  • 92.0 mm (3)
  • 100.0 mm (3)
  • 120.0 mm (12)
  • 127.0 mm (1)
  • 130.0 mm (4)
  • 132.0 mm (4)