Beyond™ Evolution™ Integral Boring Bars

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (52)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (52)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (52)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (52)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (52)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (52)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (52)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (52)
  • M Stainless Steel (52)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (52)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (52)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (52)
  • K Cast Iron (52)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (52)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (52)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (52)
  • N Non-Ferrous Materials (52)
    • N1
      Wrought Aluminum (52)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (52)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (52)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (52)
    • N6
      Carbon, Graphite Composites, CFRP (52)
  • S High-Temp Alloys (52)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (52)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (52)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (52)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (52)
  • H Hardened Materials (52)
    • H1
      Hardened Materials 44-48 HRC (52)
    • H2
      Hardened Materials 48-55 HRC (52)
Applications
Applications
  • Grooving Grooving (52)
  • ID Grooving ID Grooving (52)
  • Plunge Turning Plunge Turning (40)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (52)
  • Lightly Interrupted Cut (52)
  • Smooth Cut (52)
  • Varying Depth of Cut (52)
Over All Length [L]
Over All Length [L]
  • 4.921 in (8)
  • 5.906 in (12)
  • 7.087 in (12)
  • 7.875 in (12)
  • 9.843 in (8)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 125.0 mm (8)
  • 150.0 mm (12)
  • 180.0 mm (12)
  • 200.0 mm (12)
  • 250.0 mm (8)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.008 in (52)
  • 0.016 in (24)
  • 0.031 in (8)
  • 0.039 in (16)
  • 0.041 in (16)
  • 0.047 in (16)
  • 0.06 in (16)
  • 0.061 in (16)
  • 0.063 in (16)
  • 0.065 in (16)
  • 0.079 in (8)
  • 0.081 in (8)
  • 0.094 in (8)
  • 0.096 in (8)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (52)
  • 0.4 mm (24)
  • 0.8 mm (8)
  • 1.0 mm (16)
  • 1.05 mm (16)
  • 1.201 mm (16)
  • 1.5 mm (16)
  • 1.55 mm (16)
  • 1.6 mm (16)
  • 1.651 mm (16)
  • 2.0 mm (8)
  • 2.051 mm (8)
  • 2.375 mm (8)
  • 2.45 mm (8)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (52)
  • KCK20B (52)
  • KCM35B (40)
  • KCP10B (52)
  • KCP25B (52)
  • KCU10 (52)
  • KCU10B (52)
  • KCU25 (52)
  • KCU25B (52)
Hand Of Tool
Hand Of Tool
  • L (26)
  • R (26)
F Dimension
F Dimension
  • 8.525 mm (4)
  • 9.0 mm (4)
  • 11.0 mm (5)
  • 11.05 mm (7)
  • 13.0 mm (6)
  • 13.951 mm (2)
  • 13.976 mm (4)
  • 17.0 mm (4)
  • 17.3 mm (6)
  • 17.5 mm (2)
  • 21.125 mm (4)
  • 22.0 mm (4)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.336 in (4)
  • 0.354 in (4)
  • 0.433 in (5)
  • 0.435 in (7)
  • 0.512 in (6)
  • 0.549 in (2)
  • 0.55 in (4)
  • 0.669 in (4)
  • 0.681 in (6)
  • 0.69 in (2)
  • 0.833 in (4)
  • 0.866 in (4)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 20.0 mm (12)
  • 25.0 mm (10)
  • 25.401 mm (2)
  • 31.75 mm (6)
  • 32.0 mm (6)
  • 38.1 mm (4)
  • 40.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.787 in (12)
  • 0.984 in (10)
  • 1.0 in (2)
  • 1.25 in (6)
  • 1.26 in (6)
  • 1.5 in (4)
  • 1.575 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (21)
  • S (31)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (34)
  • NEUTRAL (ZERO) (18)
Maximum Bore Depth
Maximum Bore Depth
  • 0.946 in (4)
  • 1.0 in (4)
  • 1.25 in (6)
  • 1.26 in (4)
  • 1.5 in (6)
  • 1.575 in (4)
  • 1.586 in (2)
  • 1.587 in (2)
  • 1.969 in (2)
  • 1.98 in (4)
  • 2.0 in (7)
  • 2.496 in (2)
  • 2.5 in (1)
  • 2.52 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 24.0 mm (4)
  • 25.401 mm (4)
  • 31.75 mm (6)
  • 32.0 mm (4)
  • 38.1 mm (6)
  • 40.0 mm (4)
  • 40.276 mm (2)
  • 40.301 mm (2)
  • 50.0 mm (2)
  • 50.301 mm (4)
  • 50.801 mm (7)
  • 63.401 mm (2)
  • 63.5 mm (1)
  • 64.0 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (28)
Front-End
Cutting Width
Cutting Width
  • 0.063 in (12)
  • 0.079 in (16)
  • 0.084 in (16)
  • 0.094 in (16)
  • 0.095 in (16)
  • 0.098 in (16)
  • 0.119 in (16)
  • 0.123 in (16)
  • 0.125 in (16)
  • 0.13 in (16)
  • 0.157 in (8)
  • 0.161 in (16)
  • 0.162 in (8)
  • 0.187 in (8)
  • 0.188 in (8)
  • 0.192 in (8)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.6 mm (12)
  • 2.0 mm (16)
  • 2.125 mm (16)
  • 2.375 mm (16)
  • 2.401 mm (16)
  • 2.5 mm (16)
  • 3.0 mm (16)
  • 3.125 mm (16)
  • 3.176 mm (16)
  • 3.301 mm (16)
  • 4.0 mm (8)
  • 4.101 mm (16)
  • 4.125 mm (8)
  • 4.75 mm (8)
  • 4.775 mm (8)
  • 4.875 mm (8)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 1F (12)
  • 2 (16)
  • 3 (16)
  • 4 (8)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.197 in (8)
  • 0.276 in (24)
  • 0.394 in (12)
  • 0.473 in (8)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 5.0 mm (8)
  • 7.0 mm (24)
  • 10.0 mm (12)
  • 12.0 mm (8)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Back-End
Back-End Diameter
Back-End Diameter
  • 12.0 mm (4)
  • 12.701 mm (4)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 19.05 mm (6)
  • 20.0 mm (6)
  • 25.0 mm (6)
  • 25.401 mm (6)
  • 31.701 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (4)
  • 0.5 in (4)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.75 in (6)
  • 0.787 in (6)
  • 0.984 in (6)
  • 1.0 in (6)
  • 1.248 in (1)
  • 1.25 in (3)
  • 1.26 in (4)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Thank you for your successful registration. You now have immediate access to log in and utilize the site.

You are about to leave the Solution building process.

Are you sure you want to leave?