Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Need Help? Contact an Expert site stretcher close

Toolholders

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (150)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (150)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (150)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (150)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (150)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (150)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (150)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (150)
  • M Stainless Steel (150)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (150)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (150)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (150)
  • K Cast Iron (150)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (150)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (150)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (150)
  • N Non-Ferrous Materials (150)
    • N1
      Wrought Aluminum
      (150)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (150)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (146)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (150)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (150)
    • N6
      Carbon, Graphite Composites, CFRP
      (150)
    • N7
      MMC's
      (146)
  • S High-Temp Alloys (150)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (150)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (150)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (150)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (150)
  • H Hardened Materials (146)
    • H1
      Hardened Materials 44-48 HRC
      (146)
    • H2
      Hardened Materials 48-55 HRC
      (138)
    • H3
      Hardened Materials 56-60 HRC
      (92)
    • H4
      Hardened Materials >60 HRC
      (92)
Applications
Applications
  • Face Grooving Face Grooving (150)
  • Grooving Grooving (151)
  • OD Thread Turning OD Thread Turning (151)
  • Threading Threading (151)
Type of Thread
Type of Thread
  • 60 (138)
  • ACME (100)
  • API (92)
  • API RD (69)
  • BSW (61)
  • BUTTRESS (138)
  • M (86)
  • NPT (61)
  • STUB ACME (61)
  • UN (138)
  • UNJ (61)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (150)
  • Lightly Interrupted Cut (150)
  • Smooth Cut (150)
  • Varying Depth of Cut (150)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (14)
  • 90.0 (137)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Toolholder (106)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (138)
  • 2.0 (150)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.002 in (61)
  • 0.003 in (138)
  • 0.004 in (107)
  • 0.005 in (61)
  • 0.006 in (92)
  • 0.007 in (117)
  • 0.008 in (138)
  • 0.01 in (117)
  • 0.011 in (61)
  • 0.012 in (61)
  • 0.014 in (96)
  • 0.016 in (69)
  • 0.017 in (61)
  • 0.019 in (92)
  • 0.02 in (107)
  • 0.023 in (96)
  • 0.03 in (46)
  • 0.031 in (107)
  • 0.033 in (12)
  • 0.035 in (92)
  • 0.039 in (107)
  • 0.047 in (107)
  • 0.049 in (107)
  • 0.06 in (107)
  • 0.062 in (61)
  • 0.063 in (138)
  • 0.069 in (107)
  • 0.078 in (61)
  • 0.079 in (92)
  • 0.089 in (92)
  • 0.095 in (92)
  • 0.098 in (31)
  • 0.125 in (31)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (61)
  • 0.076 mm (138)
  • 0.1 mm (107)
  • 0.125 mm (61)
  • 0.151 mm (92)
  • 0.176 mm (117)
  • 0.2 mm (138)
  • 0.225 mm (61)
  • 0.25 mm (117)
  • 0.275 mm (61)
  • 0.301 mm (61)
  • 0.325 mm (96)
  • 0.351 mm (92)
  • 0.4 mm (69)
  • 0.426 mm (61)
  • 0.45 mm (92)
  • 0.476 mm (32)
  • 0.5 mm (107)
  • 0.576 mm (96)
  • 0.75 mm (46)
  • 0.775 mm (107)
  • 0.826 mm (12)
  • 0.9 mm (92)
  • 1.0 mm (107)
  • 1.201 mm (107)
  • 1.25 mm (107)
  • 1.5 mm (107)
  • 1.576 mm (61)
  • 1.6 mm (138)
  • 1.75 mm (107)
  • 1.975 mm (61)
  • 2.0 mm (92)
  • 2.25 mm (92)
  • 2.401 mm (92)
  • 2.5 mm (31)
  • 3.176 mm (31)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (107)
  • K313 (138)
  • K420 (150)
  • K4H (82)
  • K68 (150)
  • KB1345 (92)
  • KB1630 (92)
  • KB5625 (61)
  • KBH20 (32)
  • KC250 (107)
  • KC5010 (146)
  • KC5025 (150)
  • KC5410 (138)
  • KC710 (138)
  • KC720 (138)
  • KC722 (138)
  • KC730 (146)
  • KC732 (61)
  • KC810 (150)
  • KC850 (150)
  • KC910 (82)
  • KC9110 (138)
  • KC9120 (61)
  • KC9320 (138)
  • KC935 (138)
  • KC950 (138)
  • KCK20 (113)
  • KCK20B (138)
  • KCP10B (138)
  • KCP25B (138)
  • KCU10 (146)
  • KCU25 (148)
  • KD050 (32)
  • KD081 (61)
  • KD100 (75)
  • KD120 (92)
  • KD1425 (61)
  • KT175 (107)
  • KT315 (138)
  • KU10T (138)
  • KU25T (138)
  • KU30T (138)
  • KY3000 (92)
Hand Of Tool
Hand Of Tool
  • L (47)
  • R (59)
Wiper Insert
Wiper Insert
  • N (150)
F Dimension
F Dimension
  • 9.525 mm (2)
  • 10.0 mm (1)
  • 12.0 mm (1)
  • 12.701 mm (4)
  • 14.0 mm (2)
  • 14.275 mm (2)
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 22.225 mm (2)
  • 25.0 mm (6)
  • 25.401 mm (9)
  • 31.75 mm (24)
  • 32.0 mm (12)
  • 38.1 mm (14)
  • 40.0 mm (4)
  • 50.801 mm (11)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.375 in (2)
  • 0.394 in (1)
  • 0.473 in (1)
  • 0.5 in (4)
  • 0.551 in (2)
  • 0.562 in (2)
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.875 in (2)
  • 0.984 in (6)
  • 1.0 in (9)
  • 1.25 in (24)
  • 1.26 in (12)
  • 1.5 in (14)
  • 1.575 in (4)
  • 2.0 in (11)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (102)
  • 38.1 mm (4)
  • 41.301 mm (46)
  • 44.45 mm (2)
  • 47.6 mm (46)
  • 55.875 mm (4)
  • 56.625 mm (30)
  • 57.2 mm (20)
  • 60.325 mm (2)
  • 63.5 mm (18)
  • 76.2 mm (6)
  • 88.9 mm (79)
  • 120.65 mm (1)
  • 127.0 mm (2)
  • 139.701 mm (46)
  • 146.05 mm (3)
  • 174.601 mm (46)
  • 209.601 mm (23)
  • 222.3 mm (20)
  • 333.0 mm (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (102)
  • 1.5 in (4)
  • 1.627 in (46)
  • 1.75 in (2)
  • 1.874 in (46)
  • 2.2 in (4)
  • 2.229 in (30)
  • 2.253 in (20)
  • 2.375 in (2)
  • 2.5 in (18)
  • 3.0 in (6)
  • 3.5 in (79)
  • 4.75 in (1)
  • 5.0 in (2)
  • 5.5 in (46)
  • 5.75 in (3)
  • 6.875 in (46)
  • 8.252 in (23)
  • 8.752 in (20)
  • 13.11 in (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (146)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (146)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (95)
  • S (11)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (106)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (12)
  • 2.0 in (29)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (12)
  • 50.801 mm (29)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Cutting Width
Cutting Width
  • 0.02 in (46)
  • 0.031 in (46)
  • 0.035 in (46)
  • 0.039 in (107)
  • 0.041 in (46)
  • 0.047 in (107)
  • 0.055 in (46)
  • 0.058 in (46)
  • 0.06 in (107)
  • 0.061 in (25)
  • 0.062 in (107)
  • 0.067 in (46)
  • 0.069 in (107)
  • 0.073 in (61)
  • 0.077 in (46)
  • 0.078 in (61)
  • 0.079 in (107)
  • 0.088 in (107)
  • 0.089 in (107)
  • 0.095 in (107)
  • 0.097 in (61)
  • 0.098 in (107)
  • 0.105 in (61)
  • 0.108 in (107)
  • 0.11 in (61)
  • 0.119 in (138)
  • 0.122 in (61)
  • 0.125 in (138)
  • 0.126 in (138)
  • 0.128 in (107)
  • 0.129 in (46)
  • 0.131 in (32)
  • 0.138 in (138)
  • 0.143 in (61)
  • 0.147 in (25)
  • 0.15 in (46)
  • 0.152 in (46)
  • 0.156 in (61)
  • 0.157 in (92)
  • 0.167 in (92)
  • 0.169 in (61)
  • 0.177 in (92)
  • 0.178 in (61)
  • 0.181 in (32)
  • 0.185 in (78)
  • 0.188 in (92)
  • 0.189 in (92)
  • 0.192 in (32)
  • 0.193 in (32)
  • 0.195 in (61)
  • 0.197 in (35)
  • 0.202 in (31)
  • 0.213 in (31)
  • 0.217 in (31)
  • 0.218 in (8)
  • 0.219 in (31)
  • 0.237 in (35)
  • 0.25 in (43)
  • 0.255 in (31)
  • 0.276 in (4)
  • 0.281 in (12)
  • 0.312 in (12)
  • 0.315 in (2)
  • 0.345 in (4)
  • 0.354 in (4)
  • 0.375 in (12)
  • 0.38 in (4)
  • 0.383 in (8)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (46)
  • 0.775 mm (46)
  • 0.8 mm (46)
  • 0.9 mm (46)
  • 1.0 mm (107)
  • 1.05 mm (46)
  • 1.201 mm (107)
  • 1.401 mm (46)
  • 1.475 mm (46)
  • 1.5 mm (107)
  • 1.55 mm (25)
  • 1.576 mm (107)
  • 1.701 mm (46)
  • 1.75 mm (107)
  • 1.826 mm (61)
  • 1.951 mm (46)
  • 1.975 mm (61)
  • 2.0 mm (107)
  • 2.2 mm (107)
  • 2.225 mm (107)
  • 2.25 mm (107)
  • 2.401 mm (107)
  • 2.475 mm (61)
  • 2.5 mm (107)
  • 2.676 mm (61)
  • 2.75 mm (107)
  • 2.801 mm (61)
  • 3.0 mm (138)
  • 3.1 mm (61)
  • 3.176 mm (138)
  • 3.2 mm (138)
  • 3.25 mm (107)
  • 3.276 mm (46)
  • 3.325 mm (32)
  • 3.5 mm (138)
  • 3.6 mm (61)
  • 3.725 mm (25)
  • 3.801 mm (46)
  • 3.85 mm (46)
  • 3.95 mm (61)
  • 3.975 mm (32)
  • 4.0 mm (92)
  • 4.25 mm (92)
  • 4.3 mm (61)
  • 4.5 mm (92)
  • 4.525 mm (61)
  • 4.601 mm (32)
  • 4.7 mm (78)
  • 4.775 mm (92)
  • 4.801 mm (92)
  • 4.875 mm (32)
  • 4.9 mm (32)
  • 4.95 mm (61)
  • 5.0 mm (35)
  • 5.125 mm (31)
  • 5.4 mm (31)
  • 5.5 mm (31)
  • 5.525 mm (8)
  • 5.575 mm (31)
  • 6.0 mm (35)
  • 6.351 mm (43)
  • 6.476 mm (31)
  • 7.0 mm (4)
  • 7.125 mm (12)
  • 7.926 mm (12)
  • 8.0 mm (2)
  • 8.75 mm (4)
  • 9.0 mm (4)
  • 9.525 mm (12)
  • 9.65 mm (4)
  • 9.726 mm (8)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 2 (18)
  • 3 (19)
  • 4 (8)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.07 in (2)
  • 0.13 in (1)
  • 0.138 in (43)
  • 0.21 in (47)
  • 0.25 in (2)
  • 0.293 in (9)
  • 0.294 in (21)
  • 0.3 in (2)
  • 0.334 in (6)
  • 0.416 in (4)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.776 mm (2)
  • 3.301 mm (1)
  • 3.5 mm (43)
  • 5.325 mm (47)
  • 6.351 mm (2)
  • 7.45 mm (9)
  • 7.476 mm (21)
  • 7.625 mm (2)
  • 8.475 mm (6)
  • 10.55 mm (4)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (92)
  • B L (61)
  • C N (92)
  • D P (75)
  • H T (138)
  • H W (150)
Back-End
Connection Type
Connection Type
  • SQUARE SHANK (106)
Shank Height
Shank Height
  • 0.375 in (4)
  • 0.394 in (3)
  • 0.473 in (3)
  • 0.5 in (6)
  • 0.625 in (6)
  • 0.63 in (4)
  • 0.75 in (10)
  • 0.787 in (6)
  • 0.984 in (8)
  • 1.0 in (19)
  • 1.25 in (16)
  • 1.26 in (8)
  • 1.5 in (13)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 9.525 mm (4)
  • 10.0 mm (3)
  • 12.0 mm (3)
  • 12.701 mm (6)
  • 15.875 mm (6)
  • 16.0 mm (4)
  • 19.05 mm (10)
  • 20.0 mm (6)
  • 25.0 mm (8)
  • 25.401 mm (19)
  • 31.75 mm (16)
  • 32.0 mm (8)
  • 38.1 mm (13)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.375 in (4)
  • 0.394 in (3)
  • 0.473 in (3)
  • 0.5 in (6)
  • 0.625 in (6)
  • 0.63 in (4)
  • 0.75 in (10)
  • 0.787 in (6)
  • 0.984 in (12)
  • 1.0 in (23)
  • 1.25 in (14)
  • 1.26 in (4)
  • 1.5 in (11)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 9.525 mm (4)
  • 10.0 mm (3)
  • 12.0 mm (3)
  • 12.701 mm (6)
  • 15.875 mm (6)
  • 16.0 mm (4)
  • 19.05 mm (10)
  • 20.0 mm (6)
  • 25.0 mm (12)
  • 25.401 mm (23)
  • 31.75 mm (14)
  • 32.0 mm (4)
  • 38.1 mm (11)
Shank Width Min to Shank Width Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

NS (with shim) • Inch NS (with shim) • Inch

Top Notch™ Integral Toolholders
(21 Products)
  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving
  • ThreadingThreading
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [B4] End Chamfer [B4] End Chamfer [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
1097271 NSL204C NSL204C 31.7500 1.250 31.7500 1.250 38.1000 1.500 127.0000 5.000 35.0520 1.380 13.7160 .5400 7.4680 .2940 N.4L 25 IP
    This item is no longer available
    Please contact customer service for assistance
    Your price:
    1097265 NSL244D NSL244D 38.1000 1.500 38.1000 1.500 50.8000 2.000 152.4000 6.000 38.1000 1.500 13.7160 .5400 7.4680 .2940 N.4L 25 IP
      This item is no longer available
      Please contact customer service for assistance
      Your price:
      1097270 NSL864E NSL864E 38.1000 1.500 25.4000 1.000 31.7500 1.250 177.8000 7.000     13.7160 .5400 7.4680 .2940 N.4L 25 IP