Railroad Wheel Manufacturing

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (117)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (117)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (117)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (117)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (117)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (117)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (117)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (117)
  • M Stainless Steel (29)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (29)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (29)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (29)
  • K Cast Iron (111)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (111)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (111)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (111)
  • N Non-Ferrous Materials (23)
    • N1
      Wrought Aluminum
      (23)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (23)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (23)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (23)
    • N6
      Carbon, Graphite Composites, CFRP
      (19)
    • N7
      MMC's
      (23)
  • S High-Temp Alloys (28)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (28)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (28)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (28)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (26)
  • H Hardened Materials (19)
    • H1
      Hardened Materials 44-48 HRC
      (19)
    • H2
      Hardened Materials 48-55 HRC
      (19)
    • H3
      Hardened Materials 56-60 HRC
      (19)
Applications
  • Chamfer Turning Chamfer Turning (35)
  • Facing Facing (37)
  • ID Thread Turning ID Thread Turning (155)
  • Multiple Direction Cutting Multiple Direction Cutting (39)
  • Plunge Turning Plunge Turning (35)
  • Profiling Profiling (35)
  • Turning Turning (37)
Cutting Condition
  • Heavily Interrupted Cut (25)
  • Interrupted (12)
  • Lightly Interrupted Cut (25)
  • Smooth Cut (28)
  • Varying Depth of Cut (28)
Tool Cutting Edge Angle
  • 75.0 (6)
  • 90.0 (25)
  • 95.0 (8)
to
Cutting Edges Per Insert
  • 1.0 (47)
  • 2.0 (48)
  • 3.0 (7)
  • 4.0 (54)
  • 6.0 (34)
  • 8.0 (32)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.8 (32)
  • 1.191 (12)
  • 1.2 (55)
  • 1.588 (12)
  • 1.6 (50)
  • 2.4 (51)
  • 3.2 (7)
  • 4.0 (8)
  • 5.0 (8)
  • 6.0 (3)
  • 7.94 (3)
  • 8.0 (3)
  • 10.0 (6)
  • 12.5 (10)
  • 16.0 (5)
to
Corner Radius
  • 0.031 (8)
  • 0.0313 (32)
  • 0.0469 (55)
  • 0.047 (12)
  • 0.0625 (50)
  • 0.063 (12)
  • 0.0938 (51)
  • 0.094 (6)
  • 0.125 (3)
  • 0.126 (4)
  • 0.1575 (8)
  • 0.1969 (8)
  • 0.2362 (3)
  • 0.3125 (3)
  • 0.315 (3)
  • 0.3935 (4)
  • 0.3937 (6)
  • 0.492 (1)
  • 0.4922 (10)
  • 0.6299 (4)
  • 0.63 (1)
to
Application
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (18)
  • AC5 (6)
  • CG4 (4)
  • CL4 (20)
  • CM2 (4)
  • CM3 (30)
  • CM5 (14)
  • CPX (19)
  • GX (16)
  • K090 (12)
  • K1 (12)
  • K10M (12)
  • K20K (12)
  • K21 (12)
  • K25P (4)
  • K313 (23)
  • K35P (4)
  • K420 (17)
  • K68 (23)
  • KC210 (12)
  • KC250 (12)
  • KC5010 (26)
  • KC5025 (22)
  • KC5410 (19)
  • KC5510 (12)
  • KC720 (4)
  • KC730 (23)
  • KC7310 (12)
  • KC732 (7)
  • KC8050 (39)
  • KC810 (16)
  • KC850 (25)
  • KC9010 (14)
  • KC9025 (14)
  • KC910 (19)
  • KC9105 (8)
  • KC9110 (63)
  • KC9120 (12)
  • KC9125 (71)
  • KC9140 (14)
  • KC9145 (12)
  • KC9215 (12)
  • KC9225 (12)
  • KC9240 (26)
  • KC9240NEW (26)
  • KC9245 (12)
  • KC9315 (30)
  • KC9320 (15)
  • KC9325 (12)
  • KC935 (12)
  • KC950 (12)
  • KC990 (12)
  • KCD25 (4)
  • KCK05 (12)
  • KCK05B (12)
  • KCK15 (18)
  • KCK15B (22)
  • KCK20 (23)
  • KCK20B (23)
  • KCM15 (12)
  • KCM15B (8)
  • KCM25 (25)
  • KCM25B (17)
  • KCM35 (12)
  • KCM35B (12)
  • KCP10 (56)
  • KCP10B (30)
  • KCP25 (75)
  • KCP25B (41)
  • KCP30 (35)
  • KCP30B (24)
  • KCP40 (14)
  • KCP40B (15)
  • KCPK05 (22)
  • KCS10 (14)
  • KCS10B (22)
  • KCU10 (26)
  • KCU25 (26)
  • KM1 (8)
  • KU30T (12)
  • KY1320 (8)
  • KY1540 (8)
  • KY1615 (19)
  • KY2000 (8)
  • KY3000 (12)
  • KY3400 (12)
  • KY3500 (12)
  • KY4300 (8)
  • KY4400 (8)
  • KYK25 (8)
  • KYK35 (12)
  • KYS25 (8)
  • KYS30 (8)
  • MC2 (7)
  • NL250 (12)
  • NL300 (15)
  • NL400 (8)
  • SP0819 (12)
  • SP3019 (12)
  • SP4019 (8)
  • SPADAP (12)
  • TN7035 (3)
Wiper Insert
  • N (192)
  • Y (8)
Front-End
Clamp Style
  • M (8)
  • P (10)
  • X (21)
Adapter Front-End
  • KM MODULAR ADAPTER (6)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (56)
  • R-ROUND (41)
  • S-SQUARE 90 (56)
  • T-TRIANGLE 60 (41)
Front End Type
  • KMT - KM Adapter (6)
Maximum Cutting Depth
  • 16.0 (2)
  • 24.0 (3)
  • 31.8 (1)
  • 32.0 (1)
  • 33.0 (1)
  • 38.1 (1)
  • 40.15 (2)
  • 78.0 (1)
to
Maximum Cutting Depth
  • 0.6299 (2)
  • 0.9449 (3)
  • 1.25 (1)
  • 1.2598 (1)
  • 1.2992 (1)
  • 1.5 (1)
  • 1.5807 (2)
  • 3.0709 (1)
to
Front End Style
  • KMT00 All KM, except 02,05,09 (6)
Gage Length
  • 20.0000 (1)
  • 25.0000 (1)
  • 30.0000 (1)
  • 40.0000 (1)
  • 50.0000 (1)
  • 56.0000 (1)
Gage Length
  • 0.7874 (1)
  • 0.9843 (1)
  • 1.1810 (1)
  • 1.5750 (1)
  • 1.9685 (1)
  • 2.2050 (1)
Front End Size
  • 32.0 (1)
  • 40.0 (1)
  • 50.0 (1)
  • 63.0 (1)
  • 80.0 (1)
  • 100.0 (1)
to
Front End Size
  • 1.2598 (1)
  • 1.5748 (1)
  • 1.9685 (1)
  • 2.4803 (1)
  • 3.1496 (1)
  • 3.937 (1)
to
Insert Geometry
Shape
  • C-DIAMOND/RHOMBIC 80 (48)
  • R-ROUND (16)
  • S-SQUARE 90 (50)
  • T-TRIANGLE 60 (41)
Insert IC Size
  • 0.375 (11)
  • 0.3937 (4)
  • 0.5 (36)
  • 0.625 (27)
  • 0.75 (42)
  • 0.7874 (2)
  • 0.9844 (5)
  • 1.0 (23)
  • 1.2598 (4)
  • 1.26 (1)
to
Insert IC Size
  • 9.525 (11)
  • 10.0 (4)
  • 12.7 (36)
  • 15.875 (27)
  • 19.05 (42)
  • 20.0 (2)
  • 25.0 (5)
  • 25.4 (23)
  • 32.0 (5)
to
Cutting Edge Length
  • 0.5 (8)
  • 0.5077 (8)
  • 0.625 (7)
  • 0.6346 (10)
  • 0.6496 (11)
  • 0.75 (20)
  • 0.7616 (22)
  • 0.8661 (20)
  • 1.0 (15)
  • 1.0154 (8)
  • 1.0825 (10)
to
Cutting Edge Length
  • 12.7 (8)
  • 12.896 (8)
  • 15.875 (7)
  • 16.12 (10)
  • 16.5 (11)
  • 19.05 (20)
  • 19.344 (22)
  • 22.0 (20)
  • 25.4 (15)
  • 25.792 (8)
  • 27.496 (10)
to
Cutting Tool Material
  • C A (23)
  • C N (12)
  • H T (14)
  • H W (192)
Chip Breaker CBMD
  • RH (42)
  • RM (107)
  • RP (6)
Tolerance Class
  • M (155)
Back-End
Back-End Diameter
  • 3.1496 (2)
to
Back-End Diameter
  • 80.0 (2)
to
other
Grade
  • KC8050 (7)
  • KC9110 (30)
  • KC9125 (38)
  • KCP10 (27)
  • KCP10B (1)
  • KCP25 (42)
  • KCP25B (4)
  • KCP30 (5)
  • KCP40B (1)
Platform
  • Fix Perfect (19)
  • KM100 (1)
  • KM32 (1)
  • KM40 (1)
  • KM50 (1)
  • KM63 (1)
  • KM80 (3)
  • Kenlever (6)
  • Kenloc (55)
  • Screw-On (5)
Tool Unit
  • I (161)
  • M (194)
Over All Length [L]
  • 70.0 (2)
  • 125.0 (3)
  • 150.0 (9)
  • 152.4 (1)
  • 170.0 (6)
  • 177.8 (3)
  • 200.0 (4)
  • 203.2 (2)
  • 250.0 (9)
to
Over All Length [L]
  • 2.7559 (2)
  • 4.9213 (3)
  • 5.9055 (9)
  • 6.0 (1)
  • 6.6929 (6)
  • 7.0 (3)
  • 7.874 (4)
  • 8.0 (2)
  • 9.8425 (3)
  • 9.843 (6)
to
Insert Hand
  • N (192)
Cutting Condition Material
  • H-All (19)
  • K-All (23)
  • M-All (28)
  • N-All (23)
  • P-All (25)
  • S-All (28)
Maximum Depth of Cut
Maximum Depth of Cut
Category Path
No filters matching ""
View Products in
Metric
Inch
ISO Turning Inserts

Kenloc™ Inserts
(33 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
1882163 CNMM120408RM CNMM432RM KC9110 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
    1882195 CNMM120408RM CNMM432RM KC9125 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
      3751715 CNMM120408RM CNMM432RM KCP25 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
        3753325 CNMM120408RM CNMM432RM KCP10 12.7000 .5000 12.8960 .5077 4.7600 .1875 0.8000 .0312 5.1600 .2031
          1882196 CNMM120412RM CNMM433RM KC9125 12.7000 .5000 12.8960 .5077 4.7600 .1875 1.2000 .0468 5.1600 .2031
            3751716 CNMM120412RM CNMM433RM KCP25 12.7000 .5000 12.8960 .5077 4.7600 .1875 1.2000 .0468 5.1600 .2031
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty
              ISO Turning Inserts

              Kenloc™ Inserts
              (15 Products)
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
              1875067 CNMM190612RH CNMM643RH KC9125 19.0500 .7500 19.3440 .7616 6.3500 .2500 1.2000 .0468 7.9300 .3125
                3753316 CNMM190612RH CNMM643RH KCP10 19.0500 .7500 19.3440 .7616 6.3500 .2500 1.2000 .0468 7.9300 .3125
                  3753832 CNMM190612RH CNMM643RH KCP25 19.0500 .7500 19.3440 .7616 6.3500 .2500 1.2000 .0468 7.9300 .3125
                    1875068 CNMM190616RH CNMM644RH KC9125 19.0500 .7500 19.3440 .7616 6.3500 .2500 1.6000 .0625 7.9300 .3125
                      1875058 CNMM190616RH CNMM644RH KC9110 19.0500 .7500 19.3440 .7616 6.3500 .2500 1.6000 .0625 7.9300 .3125
                        3753317 CNMM190616RH CNMM644RH KCP10 19.0500 .7500 19.3440 .7616 6.3500 .2500 1.6000 .0625 7.9300 .3125
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty
                          • Coolant - Through CoolantCoolant - Through Coolant
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [CSWS] System Size Workpiece Side [D1] Adapter / Shank / Bore Diameter [D1] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [B2] Overall Width [B2] Overall Width [L1] Gage Length [L1] Gage Length [LS] Shank Length [LS] Shank Length Actuation Screw ID Drive Size Torque Catalog Newton Meters Weight Kilograms
                          2420366 KM100NCMEF KM100NCMEF KM100 100.0000 3.937 100.0 3.937 167.0000 6.575 112.0000 4.409 56.0000 2.205 32.0 1.259 17 mm 100-120 7.95
                            1021576 KM32NCMEF KM32NCMEF KM32 32.0000 1.259 32.0 1.259 54.0000 2.126 36.0000 1.417 20.0000 .7874 12.0 .4724 5 mm 8-11 0.24
                              1021642 KM40NCMEF KM40NCMEF KM40 40.0000 1.574 40.0 1.574 68.0000 2.677 44.0000 1.732 25.0000 .9843 15.0 .5906 6 mm 12-16 0.47
                                1021749 KM50NCMEF KM50NCMEF KM50 50.0000 1.968 50.0 1.968 84.0000 3.307 55.0000 2.165 30.0000 1.181 20.0 .7874 10 mm 27-34 0.88
                                  1021753 KM63NCMEF KM63NCMEF KM63 63.0000 2.480 63.0 2.480 102.0000 4.016 72.0000 2.835 40.0000 1.575 20.0 .7874 12 mm 47-54 1.79
                                    1144799 KM80NCMEF KM80NCMEF KM80 80.0000 3.149 80.0 3.149 132.0000 5.196 90.0000 3.543 50.0000 1.968 25.0 .9843 14 mm 79-85 3.79
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty
                                      KM80TS™ Cutting Units

                                      P-Clamping
                                      (2 Products)
                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [CD] Cutting Depth [CD] Cutting Depth Gage Insert Weight Kilograms Weight Pounds
                                      3662606 KM80TSPRDCN20 KM80TSPRDCN20 70.0000 2.755 10.0000 .3937 40.1500 1.580 RCMT2006M0 1.48 3.26
                                        3662607 KM80TSPRDCN25 KM80TSPRDCN25 70.0000 2.755 12.5000 .4921 40.1500 1.580 RCMX2507M0RP 1.54 3.39
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is not available
                                          Replacement Product This item may be available through a distributor
                                          Qty
                                          Kenloc™ Toolholders

                                          Kenloc™ Inserts
                                          (4 Products)
                                          • TurningTurning
                                          • ProfilingProfiling
                                          • FacingFacing
                                          View Products
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
                                          1096104 MCLNL246E MCLNL246E 38.1000 1.500 38.1000 1.500 50.8000 2.000 177.8000 7.000 37.8000 1.490 CN..643 9/64 5/32
                                            1808147 MCLNL326F MCLNL326F 50.8000 2.000 50.8000 2.000 63.5000 2.500 203.2000 8.000 37.8460 1.490 CN..643 9/64 5/32
                                              1096082 MCLNR246E MCLNR246E 38.1000 1.500 38.1000 1.500 50.8000 2.000 177.8000 7.000 37.8000 1.490 CN..643 9/64 5/32
                                                1808153 MCLNR326F MCLNR326F 50.8000 2.000 50.8000 2.000 63.5000 2.500 203.2000 8.000 37.8460 1.490 CN..643 9/64 5/32
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty
                                                  Kenloc™ Toolholders

                                                  Kenloc Inserts
                                                  (2 Products)
                                                  • TurningTurning
                                                  • ProfilingProfiling
                                                  • FacingFacing
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
                                                  1102537 MCLNL4040R19 MCLNL4040R19 40.0000 1.575 40.0000 1.575 50.0000 1.969 200.0000 7.874 38.0000 1.496 CN..190612 4 mm 4 mm
                                                    1101707 MCLNR4040R19 MCLNR4040R19 40.0000 1.575 40.0000 1.575 50.0000 1.969 200.0000 7.874 38.0000 1.500 CN..190612 4 mm 4 mm
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is not available
                                                      Replacement Product This item may be available through a distributor
                                                      Qty
                                                      Kenloc™ Toolholders

                                                      Kenloc Inserts
                                                      (2 Products)
                                                      • TurningTurning
                                                      • FacingFacing
                                                      View Products
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [FA] F A Dimension [FA] F A Dimension Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
                                                      1099148 MSBNL4040R19 MSBNL4040R19 40.0000 1.575 40.0000 1.575 35.0000 1.378 200.0000 7.874 40.0000 1.580 4.6000 .1811 SN..190612 4 mm 4 mm
                                                        1101954 MSBNR4040R19 MSBNR4040R19 40.0000 1.575 40.0000 1.575 35.0000 1.378 200.0000 7.874 40.0000 1.580 4.6000 .1811 SN..190612 4 mm 4 mm
                                                          List price:
                                                          Discount: %
                                                          Your price::
                                                          Replacement This item is not available
                                                          Replacement Product This item may be available through a distributor
                                                          Qty
                                                          Kenlever™ Toolholders

                                                          Kenloc™ Inserts
                                                          (2 Products)
                                                          • TurningTurning
                                                          • ProfilingProfiling
                                                          • FacingFacing
                                                          View Products
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Clamp Screw ID Drive Size
                                                          1192377 PCLNL4040S19 PCLNL4040S19 40.0000 1.575 40.0000 1.575 50.0000 1.969 250.0000 9.843 36.0000 1.420 CN..190612 25 IP
                                                            1192379 PCLNR4040S19 PCLNR4040S19 40.0000 1.575 40.0000 1.575 50.0000 1.969 250.0000 9.843 36.0000 1.420 CN..190612 25 IP
                                                              List price:
                                                              Discount: %
                                                              Your price::
                                                              Replacement This item is not available
                                                              Replacement Product This item may be available through a distributor
                                                              Qty
                                                              Fix-Perfect™ Toolholders

                                                              Screw-On Inserts
                                                              (8 Products)
                                                              View Products
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CD] Cutting Depth [CD] Cutting Depth Gage Insert Clamp Screw ID Drive Size
                                                              1244761 PRCCN2020K08H1 PRCCN2020K08H1 20.0000 .7874 20.0000 .7874 14.0000 .5512 125.0000 4.921 16.0000 .6299 RC..0803M0 2 mm
                                                                1244762 PRCCN2020K10H1 PRCCN2020K10H1 20.0000 .7874 20.0000 .7874 15.0000 .5906 125.0000 4.921 24.0000 .9449 RC..1003M0 2 mm
                                                                  1244826 PRCCN2525M08H1 PRCCN2525M08H1 25.0000 .9843 25.0000 .9843 16.5000 .6496 150.0000 5.905 16.0000 .6299 RC..0803M0 2 mm
                                                                    1244827 PRCCN2525M10H1 PRCCN2525M10H1 25.0000 .9843 25.0000 .9843 17.5000 .6890 150.0000 5.905 24.0000 .9449 RC..1003M0 2 mm
                                                                      1244828 PRCCN2525M12H1 PRCCN2525M12H1 25.0000 .9843 25.0000 .9843 18.5000 .7283 150.0000 5.905 24.0000 .9449 RC..1204M0 2.5 mm
                                                                        1192388 PRCCN3225P16H1 PRCCN3225P16H1 32.0000 1.259 25.0000 .9843 20.5000 .8071 170.0000 6.692 33.0000 1.299 RC..1606M0 3 mm
                                                                          List price:
                                                                          Discount: %
                                                                          Your price::
                                                                          Replacement This item is not available
                                                                          Replacement Product This item may be available through a distributor
                                                                          Qty
                                                                          New Railroad Wheel Manufacturing Tooling

                                                                          Fix-Perfect™ Clamping System
                                                                          (2 Products)
                                                                          View Products
                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CD] Cutting Depth [CD] Cutting Depth [GAAP] Axial Rake Angle Gage Insert
                                                                          5002098 PRCCN2020M0H1 PRCCN2020M0H1 31.7500 1.250 31.7500 1.250 25.6200 1.009 152.4000 6.000 31.8000 1.250 0.000 RCMT2006M0
                                                                            5002099 PRCCN2425M0H1 PRCCN2425M0H1 38.1000 1.500 38.1000 1.500 31.3000 1.232 177.8000 7.000 38.1000 1.500 0.000 RCMX2507M0-RP
                                                                              List price:
                                                                              Discount: %
                                                                              Your price::
                                                                              Replacement This item is not available
                                                                              Replacement Product This item may be available through a distributor
                                                                              Qty
                                                                              New Railroad Wheel Manufacturing Tooling

                                                                              Fix-Perfect™ Clamping System
                                                                              (13 Products)
                                                                              View Products
                                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Inclination Angle [GAAO] Orthogonal Rake Angle Gage Insert
                                                                              1244661 PRGCL2525M08H1 PRGCL2525M08H1 25.0000 .9843 25.0000 .9843 29.0000 1.141 150.0000 5.905 26.0000 1.023 0.000 0.000 RC..0803M0
                                                                                1244662 PRGCL2525M10H1 PRGCL2525M10H1 25.0000 .9843 25.0000 .9843 30.0000 1.181 150.0000 5.905 26.0000 1.023 0.000 0.000 RC..1003M0
                                                                                  1244786 PRGCL2525M12H1 PRGCL2525M12H1 25.0000 .9843 25.0000 .9843 32.0000 1.259 150.0000 5.905 26.0000 1.023 0.000 0.000 RC..1204M0
                                                                                    1244787 PRGCL3225P16H1 PRGCL3225P16H1 32.0000 1.259 25.0000 .9843 32.0000 1.259 170.0000 6.692 36.0000 1.417 0.000 0.000 RC..1606M0
                                                                                      1244663 PRGCL3232P20H1 PRGCL3232P20H1 32.0000 1.259 32.0000 1.259 40.0000 1.574 170.0000 6.692 40.0000 1.574 0.000 0.000 RC..2006M0
                                                                                        1244829 PRGCL4040S25H1 PRGCL4040S25H1 40.0000 1.574 40.0000 1.574 50.0000 1.968 250.0000 9.842 47.0000 1.850 0.000 0.000 RC..2507M0
                                                                                          List price:
                                                                                          Discount: %
                                                                                          Your price::
                                                                                          Replacement This item is not available
                                                                                          Replacement Product This item may be available through a distributor
                                                                                          Qty
                                                                                          Kenlever™ Toolholders

                                                                                          Kenloc™ Inserts
                                                                                          (4 Products)
                                                                                          • FacingFacing
                                                                                          • TurningTurning
                                                                                          View Products
                                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [FA] F A Dimension [FA] F A Dimension Gage Insert Clamp Screw ID Drive Size
                                                                                          1244674 PSBNL4040S19 PSBNL4040S19 40.0000 1.574 40.0000 1.574 35.0000 1.378 250.0000 9.843 38.0000 1.500 4.6000 .1810 SN..190612 25 IP
                                                                                            1244675 PSBNL4040S25 PSBNL4040S25 40.0000 1.574 40.0000 1.574 35.0000 1.378 250.0000 9.843 47.0000 1.850 5.9000 .2320 SN..250724 30 IP
                                                                                              1244682 PSBNR4040S19 PSBNR4040S19 40.0000 1.574 40.0000 1.574 35.0000 1.378 250.0000 9.843 38.0000 1.500 4.6000 .1810 SN..190612 25 IP
                                                                                                1244683 PSBNR4040S25 PSBNR4040S25 40.0000 1.574 40.0000 1.574 35.0000 1.378 250.0000 9.843 47.0000 1.850 5.9000 .2320 SN..250724 30 IP
                                                                                                  List price:
                                                                                                  Discount: %
                                                                                                  Your price::
                                                                                                  Replacement This item is not available
                                                                                                  Replacement Product This item may be available through a distributor
                                                                                                  Qty
                                                                                                  ISO Carbide Inserts

                                                                                                  Screw-On Inserts
                                                                                                  (2 Products)
                                                                                                  View Products
                                                                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [D1] Insert Hole Size [D1] Insert Hole Size
                                                                                                  2432408 RCMT2006M0RM RCMT2006M0RM KC9125 20.0000 .7874 6.3500 .2500 6.5000 .2559
                                                                                                    3755762 RCMT2006M0RM RCMT2006M0RM KCP25 20.0000 .7874 6.3500 .2500 6.5000 .2559
                                                                                                      List price:
                                                                                                      Discount: %
                                                                                                      Your price::
                                                                                                      Replacement This item is not available
                                                                                                      Replacement Product This item may be available through a distributor
                                                                                                      Qty
                                                                                                      ISO Carbide Inserts

                                                                                                      Screw-On Inserts
                                                                                                      (6 Products)
                                                                                                      View Products
                                                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [S] Insert Thickness [S] Insert Thickness [D1] Insert Hole Size [D1] Insert Hole Size
                                                                                                      2456163 RCMX1003M0RP RCMX1003M0RP KC9110 10.0000 .3937 3.1800 .1250 3.8000 .1500
                                                                                                        2456170 RCMX1003M0RP RCMX1003M0RP KC9125 10.0000 .3937 3.1800 .1250 3.8000 .1500
                                                                                                          3749276 RCMX1003M0RP RCMX1003M0RP KCP10 10.0000 .3937 3.1800 .1250 3.8000 .1500
                                                                                                            3751676 RCMX1003M0RP RCMX1003M0RP KCP25 10.0000 .3937 3.1800 .1250 3.8000 .1500