WCMT-LF

Grades

• 
  K313

  Composition: A hard, low binder content, unalloyed WC/Co fine-grain grade.
  Application: Exceptional edge wear resistance combined with very high strength for machining titanium, cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and most high-temp alloys. Superior thermal deformation and depth-of-cut notch resistance. The grain structure is well controlled for minimal pits and flaws, which contributes to long, reliable service.

  S High-Temp Alloys

  N Non-Ferrous
• 
  KC5010

  Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
  Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• 
  KC5025

  Composition: An advanced PVD-AlTiN-coated grade with a tough, ultra-fine-grain unalloyed substrate.
  Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates.

  S High-Temp Alloys

  M Stainless Steel
• KC730

  KC730

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• KC732

  KC732

• KC850

  composition: A CVD tri-phase coating on an extra-strong, cobalt-enriched
  alloyed substrate.
  application: Designed for heavy cutting of low-, medium-, and high-carbon
  steels, medium hardness alloy and tool steels, stainless steels, and some
  high-temperature alloys. Excellent thermal and mechanical shock resistance
  makes grade KC850 ideally suited for difficult drilling applications.
  Used in inserts for Kendex/Metcut drill bodies.
  

  P Steel

  M Stainless Steel
• KC9025
• KC910
• KC935

  KC935

• KC950

  KC950

• 
  KT315

  Composition: A multilayer PVD-TiN/TiCN/TiN-coated cermet turning grade.
  Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

  P Steel

  K Cast Iron

  M Stainless Steel