Kenloc™ Inserts
    Kenloc™ Inserts
    Kenloc™ Inserts
    Kenloc™ Inserts

    CNMM-RP

    Kenloc™ Inserts

    Metric
    Inch
    SAP Material Number 5698162
    ISO Catalog Number CNMM120408RP
    ANSI Catalog Number CNMM432RP
    Grade KCP25B
    [D] Insert IC Size 12.7000
    [D] Insert IC Size .5000
    [L10] Insert Cutting Edge Length 12.8960
    [L10] Insert Cutting Edge Length .5077
    [S] Insert Thickness 4.7600
    [S] Insert Thickness .1875
    [Rε] Corner Radius 0.8000
    [Rε] Corner Radius .0312
    [D1] Insert Hole Size 5.1600
    [D1] Insert Hole Size .2031
    See all Product Variants

    Workpiece Materials

    P Steel
    K Cast Iron

    Features and benefits

    • Roughing geometry with positive rake face for chip control in difficult materials.

    • Beyond™ Drive™ grades included.

    Machine Side

    loading...

    Workpiece Side

    loading...

    Grades

    • KCM15

      Composition: A multilayer MTCVD-TiCN-Al2O3 coated carbide grade.
      Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20–25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimise burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimises microchipping and edge build-up, and improves workpiece finish.

      P Steel
      M Stainless Steel
      S High-Temp Alloys
    • KCM25

      Composition: A multilayer CVD coating comprised of TiN-MT-TiCN-Al2O3 layers over a tough, cobalt-enriched carbide substrate.
      Application: This CVD-coated grade is designed for general-purpose machining of austenitic stainless steels at moderate speeds and feeds. KCM25 inserts offer an extraordinary combination of toughness, built-up edge resistance, and wear resistance in stainless steel applications.

      P Steel
      M Stainless Steel
      S High-Temp Alloys
    • KCM25B

      Composition: A multilayer MTCVD-TiCN-Al2O3-TiOCN coated carbide grade.

      Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20-25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

      P Steel
      M Stainless Steel
      S High-Temp Alloys
    • KCM35

      Composition: A multilayer TiN-MT-TiCN-Al2O3 CVD coating over a super-tough substrate.
      Application: The KCM35 grade is engineered to take on the most brutal cast stainless steel machining applications. The substrate withstands heavy interruptions, while the coating provides the wear resistance needed for long tool life. The polished surface resists edge build-up, even at slow cutting speeds. KCM35 grade is available in insert sizes and geometries appropriate for heavy feeds and large depths of cut.

      P Steel
      M Stainless Steel
      S High-Temp Alloys
    • KCP05

      Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3 coating.
      Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

      P Steel
      K Cast Iron
    • KCP10

      Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
      Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

      P Steel
      K Cast Iron
    • KCP10B

      Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

      Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

      P Steel
      K Cast Iron
    • KCP25

      Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
      Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

      P Steel
      K Cast Iron
    • KCP25B

      Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

      Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

      P Steel
      K Cast Iron
    • KCP30

      Composition: A newly engineered, tough cobalt-enriched carbide grade with an advanced multilayer TiN-MT-TiCN-Al2O3 coating.
      Application: For medium to rough machining of all carbon, alloy, and stainless steels. The substrate design provides superior insert strength that is required for this application, and the multilayer coating adds wear resistance to the insert resulting in long tool life.

      P Steel
    • KCP40

      Composition: A tough carbide grade with a moderately thick TiN-MT-TiCN-Al2O3 coating.
      Application: For heavy roughing of carbon, alloy, and stainless steels. The substrate-coating combination provides unbelievable toughness and operational security allowing high metal removal rates even in most demanding interrupted cuts.

      P Steel
      M Stainless Steel
    • KCPK05

      Composition: A deformation-resistant, cobalt-enriched substrate combined with thick MTCVD TiCN-Al2O3 coating.

      Application: For high productivity turning of steels and PH stainless steels in continuous to lightly interrupted cuts. This grade provides excellent combination of toughness and high speed wear resistance allowing the fastest steel part production. Its unique combination of substrate and coating also make it an ideal roughing grade for cast iron where chipping resistance is required.

      P Steel
      K Cast Iron
    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
    You are about to create a duplicate . Do you want to proceed?
    You are about to delete Do you want to proceed?
    What would you like to rename your to?
    Please enter a valid name
    Please enter a name for the duplicate
    Please enter a valid name
    You are about to add to your My Solutions page. Do you want to proceed?
    Please enter a valid name
    Send a copy of

    Please enter a valid Email
    Please enter a valid name

    We have found the following CAD Drawings

    Select the files you are looking for and download them all at once

    You should be logged to see your dashboard information
    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
    item(s) successfully added to the cart
    View Cart