Reaming: Through Hole
Reaming: Blind HoleDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 6761004 |
| ISO Catalog ID | R215A14000H6SFM |
| ANSI Catalog ID | R215A14000H6SFM |
| Grade | KD1415 |
| [D1] Reamer Diameter Minimum | 14 mm |
| [D1] Reamer Diameter Minimum | 0.5512 in |
| [D] Adapter / Shank / Bore Diameter | 14 mm |
| [D] Adapter / Shank / Bore Diameter | 0.551 in |
| [L] Overall Length | 135 mm |
| [L] Overall Length | 5.315 in |
| [L4] Maximum Reaming Depth | 70 mm |
| [L4] Maximum Reaming Depth | 2.7516 in |
| [L10] Cutting Edge Length | 7.248 mm |
| [L10] Cutting Edge Length | 0.2854 in |
| [Z] Number of Flutes | 4 |
Reaming: Through HoleReaming: Blind HoleGrades
KD1415
PCD-tip brazed to carbide for general machining of aluminum with a low silicon content, non-ferrous heavy metals, and plastics. KD1415™ can be used at high cutting speeds and for continuous cutting, even where outstanding surface finishes are required. KD1415 is suitable for wet and dry machining.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Material |  |  | |||||||||||
| Cutting Speed | Inch | ||||||||||||
| Range | Recommended feed per tooth (IPT = inch/th) | ||||||||||||
| Min | Starting Value | Max | > = .20 | > = .40 | > = .60 | > = 1.00 | > = 1.20 | > = 2.00 | > = 2.80 | max. 4.00 | |||
| N | 1 | 500 | 1200 | 2100 | IPR | .002 – .006 | .003 – .008 | .004 – .010 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 |
| 2 | 500 | 1500 | 2000 | IPR | .002 – .006 | .003 – .008 | .004 – .010 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | |
| 3 | 500 | 1300 | 1800 | IPR | .002 – .006 | .003 – .008 | .004 – .010 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | |
| 4 | 300 | 800 | 1100 | IPR | .002 – .006 | .002 – .008 | .004 – .010 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | |
| Material | | | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended feed per tooth (fz = mm/th) | ||||||||||||
| Min | Starting Value | Max | > = 5,0 | > = 10,0 | > = 16,0 | > = 25,0 | > = 32,0 | > = 50,0 | > = 70,0 | max. 100,0 | |||
| N | 1 | 150 | 350 | 650 | mm/r | 0,06 | 0,08 | 0,10 | 0,12 | 0,12 | 0,12 | 0,12 | 0,12 |
| 2 | 150 | 450 | 600 | mm/r | 0,06 | 0,06 | 0,08 | 0,08 | 0,08 | 0,10 | 0,10 | 0,10 | |
| 3 | 150 | 400 | 550 | mm/r | 0,05 | 0,05 | 0,05 | 0,06 | 0,06 | 0,08 | 0,08 | 0,08 | |
| 4 | 100 | 250 | 350 | mm/r | 0,05 | 0,05 | 0,05 | 0,06 | 0,06 | 0,08 | 0,08 | 0,08 | |
| Material | | | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended feed per tooth (fz = mm/th) | ||||||||||||
| Min | Starting Value | Max | > = 5,0 | > = 10,0 | > = 16,0 | > = 25,0 | > = 32,0 | > = 50,0 | > = 70,0 | max. 100,0 | |||
| N | 1 | 150 | 350 | 650 | mm/r | 0,06 | 0,08 | 0,10 | 0,12 | 0,12 | 0,12 | 0,12 | 0,12 |
| 2 | 150 | 450 | 600 | mm/r | 0,06 | 0,06 | 0,08 | 0,08 | 0,08 | 0,10 | 0,10 | 0,10 | |
| 3 | 150 | 400 | 550 | mm/r | 0,05 | 0,05 | 0,05 | 0,06 | 0,06 | 0,08 | 0,08 | 0,08 | |
| 4 | 100 | 250 | 350 | mm/r | 0,05 | 0,05 | 0,05 | 0,06 | 0,06 | 0,08 | 0,08 | 0,08 | |
| Material | | | |||||||||||
| Cutting Speed | Inch | ||||||||||||
| Range | Recommended feed per tooth (IPT = inch/th) | ||||||||||||
| Min | Starting Value | Max | > = .20 | > = .40 | > = .60 | > = 1.00 | > = 1.20 | > = 2.00 | > = 2.80 | max. 4.00 | |||
| N | 1 | 500 | 1200 | 2100 | IPR | .002 – .006 | .003 – .008 | .004 – .010 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 |
| 2 | 500 | 1500 | 2000 | IPR | .002 – .006 | .003 – .008 | .004 – .010 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | |
| 3 | 500 | 1300 | 1800 | IPR | .002 – .006 | .003 – .008 | .004 – .010 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | |
| 4 | 300 | 800 | 1100 | IPR | .002 – .006 | .002 – .008 | .004 – .010 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | .005 – .011 | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?