7713VR12 RPPT12-432-X5 • Precision Pressed • 5 Indexes • For machining Stainless Steel and Heat Resistant Alloys

Feeds

At 6,00 Axial Depth of Cut (ap)

Insert Geometry

Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)

Insert Geometry

10%

20%

30%

40–100%

701–X4

0,12

0,16

0,22

0,08

0,12

0,16

0,06

0,09

0,12

0,05

0,08

0,10

0,05

0,07

0,10

701–X4

432–X5

–

432–X5

432–X8

–

432–X8

442–X5

–

442–X5

442–X8

–

442–X8

442–X4

0,23

0,41

0,66

0,17

0,30

0,47

0,13

0,22

0,35

0,11

0,19

0,31

0,10

0,18

0,28

442–X4

GD–X5

–

GD–X5

GD–X8

–

GD–X8

T–X4

0,23

0,41

0,66

0,17

0,30

0,47

0,13

0,22

0,35

0,11

0,19

0,31

0,10

0,18

0,28

T–X4

At 3,00 Axial Depth of Cut (ap)

Light Machining

General Purpose

Heavy Machining

At 2,50 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	0,13	0,19	0,25	0,10	0,14	0,18	0,07	0,10	0,14	0,06	0,09	0,12	0,06	0,08	0,11	701–X4
432–X5	0,16	0,49	0,93	0,12	0,35	0,66	0,09	0,26	0,49	0,08	0,23	0,43	0,07	0,21	0,39	432–X5
432–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	432–X8
442–X5	0,16	0,49	0,93	0,12	0,35	0,66	0,09	0,26	0,49	0,08	0,23	0,43	0,07	0,21	0,39	442–X5
442–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	442–X8
442–X4	0,16	0,49	0,93	0,12	0,35	0,66	0,09	0,26	0,49	0,08	0,23	0,43	0,07	0,21	0,39	442–X4
GD–X5	0,16	0,54	0,99	0,12	0,39	0,70	0,09	0,29	0,52	0,08	0,25	0,45	0,07	0,23	0,42	GD–X5
GD–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	GD–X8
T–X4	0,27	0,68	1,10	0,19	0,49	0,78	0,14	0,36	0,58	0,13	0,32	0,50	0,12	0,29	0,46	T–X4

At 1,50 Axial Depth of Cut (ap)

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	0,17	0,24	0,33	0,13	0,18	0,24	0,09	0,13	0,18	0,08	0,12	0,16	0,08	0,11	0,14	701–X4
432–X5	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	432–X5
432–X8	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	432–X8
442–X5	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	442–X5
442–X8	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	442–X8
442–X4	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	442–X4
GD–X5	0,21	0,71	1,31	0,15	0,51	0,93	0,11	0,38	0,68	0,10	0,33	0,60	0,09	0,30	0,54	GD–X5
GD–X8	0,21	0,71	1,31	0,15	0,51	0,93	0,11	0,38	0,68	0,10	0,33	0,60	0,09	0,30	0,54	GD–X8
T–X4	0,35	0,90	1,47	0,25	0,64	1,03	0,19	0,47	0,76	0,17	0,41	0,66	0,15	0,38	0,60	T–X4

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	0,14	0,20	0,27	0,10	0,14	0,20	0,08	0,11	0,15	0,07	0,09	0,13	0,06	0,09	0,12	701–X4
432–X5	0,17	0,52	1,00	0,12	0,37	0,71	0,09	0,28	0,53	0,08	0,24	0,46	0,07	0,22	0,42	432–X5
432–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	432–X8
442–X5	0,17	0,52	1,00	0,12	0,37	0,71	0,09	0,28	0,53	0,08	0,24	0,46	0,07	0,22	0,42	442–X5
442–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	442–X8
442–X4	0,17	0,52	1,00	0,12	0,37	0,71	0,09	0,28	0,53	0,08	0,24	0,46	0,07	0,22	0,42	442–X4
GD–X5	0,17	0,58	1,06	0,12	0,41	0,75	0,09	0,31	0,56	0,08	0,27	0,48	0,07	0,25	0,44	GD–X5
GD–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	GD–X8
T–X4	0,29	0,73	1,18	0,21	0,52	0,84	0,15	0,39	0,62	0,13	0,34	0,54	0,12	0,31	0,49	T–X4

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
701–X4	0,14	0,20	0,27	0,10	0,14	0,20	0,08	0,11	0,15	0,07	0,09	0,13	0,06	0,09	0,12	701–X4
432–X5	0,17	0,52	1,00	0,12	0,37	0,71	0,09	0,28	0,53	0,08	0,24	0,46	0,07	0,22	0,42	432–X5
432–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	432–X8
442–X5	0,17	0,52	1,00	0,12	0,37	0,71	0,09	0,28	0,53	0,08	0,24	0,46	0,07	0,22	0,42	442–X5
442–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	442–X8
442–X4	0,17	0,52	1,00	0,12	0,37	0,71	0,09	0,28	0,53	0,08	0,24	0,46	0,07	0,22	0,42	442–X4
GD–X5	0,17	0,58	1,06	0,12	0,41	0,75	0,09	0,31	0,56	0,08	0,27	0,48	0,07	0,25	0,44	GD–X5
GD–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	GD–X8
T–X4	0,29	0,73	1,18	0,21	0,52	0,84	0,15	0,39	0,62	0,13	0,34	0,54	0,12	0,31	0,49	T–X4

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
701–X4	0,13	0,19	0,25	0,10	0,14	0,18	0,07	0,10	0,14	0,06	0,09	0,12	0,06	0,08	0,11	701–X4
432–X5	0,16	0,49	0,93	0,12	0,35	0,66	0,09	0,26	0,49	0,08	0,23	0,43	0,07	0,21	0,39	432–X5
432–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	432–X8
442–X5	0,16	0,49	0,93	0,12	0,35	0,66	0,09	0,26	0,49	0,08	0,23	0,43	0,07	0,21	0,39	442–X5
442–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	442–X8
442–X4	0,16	0,49	0,93	0,12	0,35	0,66	0,09	0,26	0,49	0,08	0,23	0,43	0,07	0,21	0,39	442–X4
GD–X5	0,16	0,54	0,99	0,12	0,39	0,70	0,09	0,29	0,52	0,08	0,25	0,45	0,07	0,23	0,42	GD–X5
GD–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	GD–X8
T–X4	0,27	0,68	1,10	0,19	0,49	0,78	0,14	0,36	0,58	0,13	0,32	0,50	0,12	0,29	0,46	T–X4

Insert Geometry

Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)

Insert Geometry

10%

20%

30%

40–100%

701–X4

0,12

0,16

0,22

0,08

0,12

0,16

0,06

0,09

0,12

0,05

0,08

0,10

0,05

0,07

0,10

701–X4

432–X5

–

432–X5

432–X8

–

432–X8

442–X5

–

442–X5

442–X8

–

442–X8

442–X4

0,23

0,41

0,66

0,17

0,30

0,47

0,13

0,22

0,35

0,11

0,19

0,31

0,10

0,18

0,28

442–X4

GD–X5

–

GD–X5

GD–X8

–

GD–X8

T–X4

0,23

0,41

0,66

0,17

0,30

0,47

0,13

0,22

0,35

0,11

0,19

0,31

0,10

0,18

0,28

T–X4

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	5%			10%			20%			30%			40–100%			Insert Geometry
701–X4	0,17	0,24	0,33	0,13	0,18	0,24	0,09	0,13	0,18	0,08	0,12	0,16	0,08	0,11	0,14	701–X4
432–X5	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	432–X5
432–X8	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	432–X8
442–X5	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	442–X5
442–X8	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	442–X8
442–X4	0,21	0,64	1,23	0,15	0,46	0,87	0,11	0,34	0,65	0,10	0,30	0,56	0,09	0,27	0,51	442–X4
GD–X5	0,21	0,71	1,31	0,15	0,51	0,93	0,11	0,38	0,68	0,10	0,33	0,60	0,09	0,30	0,54	GD–X5
GD–X8	0,21	0,71	1,31	0,15	0,51	0,93	0,11	0,38	0,68	0,10	0,33	0,60	0,09	0,30	0,54	GD–X8
T–X4	0,35	0,90	1,47	0,25	0,64	1,03	0,19	0,47	0,76	0,17	0,41	0,66	0,15	0,38	0,60	T–X4

At .236 Axial Depth of Cut (ap)

Light Machining

General Purpose

Heavy Machining

At .118 Axial Depth of Cut (ap)

Insert Geometry

Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)

Insert Geometry

10%

20%

30%

40–100%

701–X4

.005

.008

.011

.003

.006

.008

.002

.004

.006

.002

.004

.005

.002

.004

.005

701–X4

432–X5

–

432–X5

432–X8

–

432–X8

442–X5

–

442–X5

442–X8

–

442–X8

442–X4

.007

.021

.037

.005

.015

.027

.004

.011

.020

.003

.010

.017

.003

.009

.016

442–X4

GD–X5

–

GD–X5

GD–X8

–

GD–X8

T–X4

.009

.023

.037

.007

.017

.027

.005

.012

.020

.004

.011

.017

.004

.010

.016

T–X4

At .098 Axial Depth of Cut (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	.005	.009	.013	.004	.007	.009	.003	.005	.007	.002	.004	.006	.002	.004	.005	701–X4
432–X5	.006	.019	.037	.005	.014	.027	.003	.010	.020	.003	.009	.017	.003	.008	.016	432–X5
432–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	432–X8
442–X5	.006	.019	.037	.005	.014	.027	.003	.010	.020	.003	.009	.017	.003	.008	.016	442–X5
442–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	442–X8
442–X4	.008	.024	.043	.006	.017	.031	.004	.013	.023	.004	.011	.020	.003	.010	.018	442–X4
GD–X5	.006	.022	.040	.005	.016	.028	.003	.012	.021	.003	.010	.018	.003	.009	.017	GD–X5
GD–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	GD–X8
T–X4	.011	.027	.043	.008	.019	.031	.006	.014	.023	.005	.012	.020	.005	.011	.018	T–X4

At .059 Axial Depth of Cut (ap)

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
–	5%			10%			20%			30%			40–100%
701–X4	.007	.012	.017	.005	.009	.012	.004	.007	.009	.003	.006	.008	.003	.005	.007	701–X4
432–X5	.008	.026	.049	.006	.018	.035	.005	.014	.026	.004	.012	.022	.004	.011	.021	432–X5
432–X8	.008	.026	.049	.006	.018	.035	.005	.014	.026	.004	.012	.022	.004	.011	.021	432–X8
442–X5	.008	.026	.049	.006	.018	.035	.005	.014	.026	.004	.012	.022	.004	.011	.021	442–X5
442–X8	.008	.026	.049	.006	.018	.035	.005	.014	.026	.004	.012	.022	.004	.011	.021	442–X8
442–X4	.011	.032	.058	.008	.023	.041	.006	.017	.030	.005	.015	.026	.005	.014	.024	442–X4
GD–X5	.008	.028	.053	.006	.020	.037	.005	.015	.027	.004	.013	.024	.004	.012	.022	GD–X5
GD–X8	.008	.028	.053	.006	.020	.037	.005	.015	.027	.004	.013	.024	.004	.012	.022	GD–X8
T–X4	.014	.035	.058	.010	.025	.041	.007	.019	.030	.006	.016	.026	.006	.015	.024	T–X4

Insert Geometry	Programmed Feed per Tooth (fz) at % Radial Depth of Cut (ae) of Working Diameter (Dw)															Insert Geometry
	5%			10%			20%			30%			40–100%
701–X4	.006	.010	.014	.004	.007	.010	.003	.005	.007	.003	.005	.006	.002	.004	.006	701–X4
432–X5	.007	.021	.040	.005	.015	.028	.004	.011	.021	.003	.010	.018	.003	.009	.017	432–X5
432–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	432–X8
442–X5	.007	.021	.040	.005	.015	.028	.004	.011	.021	.003	.010	.018	.003	.009	.017	442–X5
442–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	442–X8
442–X4	.009	.026	.046	.006	.019	.033	.005	.014	.024	.004	.012	.021	.004	.011	.019	442–X4
GD–X5	.007	.023	.042	.005	.017	.030	.004	.012	.022	.003	.011	.019	.003	.010	.018	GD–X5
GD–X8	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	GD–X8
T–X4	.011	.029	.046	.008	.020	.033	.006	.015	.024	.005	.013	.021	.005	.012	.019	T–X4

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
701-X4	.005	.009	.013	.004	.007	.009	.003	.005	.007	.002	.004	.006	.002	.004	.005	701-X4
432-X5	.006	.019	.037	.005	.014	.027	.003	.010	.020	.003	.009	.017	.003	.008	.016	432-X5
432-X8																432-X8
442-X5	.006	.019	.037	.005	.014	.027	.003	.010	.020	.003	.009	.017	.003	.008	.016	442-X5
442-X8																442-X8
442-X4	.008	.024	.043	.006	.017	.031	.004	.013	.023	.004	.011	.020	.003	.010	.018	442-X4
GD-X5	.006	.022	.040	.005	.016	.028	.003	.012	.021	.003	.010	.018	.003	.009	.017	GD-X5
GD-X8																GD-X8
T-X4	.011	.027	.043	.008	.019	.031	.006	.014	.023	.005	.012	.020	.005	.011	.018	T-X4

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
701-X4	.007	.012	.017	.005	.009	.012	.004	.007	.009	.003	.006	.008	.003	.005	.007	701-X4
432-X5	.008	.026	.049	.006	.018	.035	.005	.014	.026	.004	.012	.022	.004	.011	.021	432-X5
432-X8	.008	.026	.049	.006	.018	.035	.005	.014	.026	.004	.012	.022	.004	.011	.021	432-X8
442-X5	.008	.026	.049	.006	.018	.035	.005	.014	.026	.004	.012	.022	.004	.011	.021	442-X5
442-X8	.008	.026	.049	.006	.018	.035	.005	.014	.026	.004	.012	.022	.004	.011	.021	442-X8
442-X4	.011	.032	.058	.008	.023	.041	.006	.017	.030	.005	.015	.026	.005	.014	.024	442-X4
GD-X5	.008	.028	.053	.006	.020	.037	.005	.015	.027	.004	.013	.024	.004	.012	.022	GD-X5
GD-X8	.008	.028	.053	.006	.020	.037	.005	.015	.027	.004	.013	.024	.004	.012	.022	GD-X8
T-X4	.014	.035	.058	.010	.025	.041	.007	.019	.030	.006	.016	.026	.006	.015	.024	T-X4

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
701-X4	.006	.010	.014	.004	.007	.010	.003	.005	.007	.003	.005	.006	.002	.004	.006	701-X4
432-X5	.007	.021	.040	.005	.015	.028	.004	.011	.021	.003	.010	.018	.003	.009	.017	432-X5
432-X8																432-X8
442-X5	.007	.021	.040	.005	.015	.028	.004	.011	.021	.003	.010	.018	.003	.009	.017	442-X5
442-X8																442-X8
442-X4	.009	.026	.046	.006	.019	.033	.005	.014	.024	.004	.012	.021	.004	.011	.019	442-X4
GD-X5	.007	.023	.042	.005	.017	.030	.004	.012	.022	.003	.011	.019	.003	.010	.018	GD-X5
GD-X8																GD-X8
T-X4	.011	.029	.046	.008	.020	.033	.006	.015	.024	.005	.013	.021	.005	.012	.019	T-X4

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
701-X4	.005	.008	.011	.003	.006	.008	.002	.004	.006	.002	.004	.005	.002	.004	.005	701-X4
432-X5																432-X5
432-X8																432-X8
442-X5																442-X5
442-X8																442-X8
442-X4	.007	.021	.037	.005	.015	.027	.004	.011	.020	.003	.010	.017	.003	.009	.016	442-X4
GD-X5																GD-X5
GD-X8																GD-X8
T-X4	.009	.023	.037	.007	.017	.027	.005	.012	.020	.004	.011	.017	.004	.010	.016	T-X4

View MoreView Less

Speeds

Recommended Starting Speeds [m/min]

Material Group		GH1			X700			KCM40			SP6519			X500			MP91M			SC6525
P	1	–	–	–	–	–	–	–	–	–	130	213	295	130	200	270	140	243	345	140	255	370
	2	–	–	–	–	–	–	–	–	–	115	188	260	115	178	240	120	213	305	120	223	325
	3	–	–	–	–	–	–	100	170	240	100	165	230	100	155	210	105	188	270	105	198	290
	4	–	–	–	–	–	–	75	128	180	75	125	175	75	118	160	80	143	205	80	145	210
	5	–	–	–	70	103	135	–	–	–	70	105	140	70	100	130	–	–	–	80	120	160
	6	–	–	–	50	83	115	–	–	–	50	85	120	50	80	110	–	–	–	60	100	140
M	1	–	–	–	115	188	260	115	188	260	115	193	270	115	183	250	–	–	–	120	205	290
	2	–	–	–	105	168	230	100	165	230	105	170	235	100	160	220	–	–	–	110	185	260
	3	–	–	–	85	138	190	50	83	115	85	140	195	80	130	180	–	–	–	90	150	210
K	1	135	213	290	–	–	–	–	–	–	140	218	295	120	200	280	145	255	365	145	268	390
	2	120	183	245	–	–	–	–	–	–	110	175	240	105	155	205	115	200	285	115	210	305
	3	115	158	200	–	–	–	–	–	–	100	160	220	95	133	170	105	183	260	–	–	–
N	1–2	400	1725	3050	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	295	1368	2440	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	23	38	52	23	38	52	23	39	55	23	36	48	–	–	–	–	–	–
	2	–	–	–	22	34	46	22	34	46	22	35	48	21	33	44	–	–	–	–	–	–
	3	–	–	–	25	39	53	25	39	53	25	40	55	24	38	51	–	–	–	–	–	–
	4	–	–	–	36	56	75	36	56	75	36	58	79	35	54	73	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	50	78	105	50	80	110

Material Group		GH1			X700			KCM40			SP6519			X500			MP91M			SC6525
P	1	–	–	–	–	–	–	–	–	–	130	213	295	130	200	270	140	243	345	140	255	370
	2	–	–	–	–	–	–	–	–	–	115	188	260	115	178	240	120	213	305	120	223	325
	3	–	–	–	–	–	–	100	170	240	100	165	230	100	155	210	105	188	270	105	198	290
	4	–	–	–	–	–	–	75	128	180	75	125	175	75	118	160	80	143	205	80	145	210
	5	–	–	–	70	103	135	–	–	–	70	105	140	70	100	130	–	–	–	80	120	160
	6	–	–	–	50	83	115	–	–	–	50	85	120	50	80	110	–	–	–	60	100	140
M	1	–	–	–	115	188	260	115	188	260	115	193	270	115	183	250	–	–	–	120	205	290
	2	–	–	–	105	168	230	100	165	230	105	170	235	100	160	220	–	–	–	110	185	260
	3	–	–	–	85	138	190	50	83	115	85	140	195	80	130	180	–	–	–	90	150	210
K	1	135	213	290	–	–	–	–	–	–	140	218	295	120	200	280	145	255	365	145	268	390
	2	120	183	245	–	–	–	–	–	–	110	175	240	105	155	205	115	200	285	115	210	305
	3	115	158	200	–	–	–	–	–	–	100	160	220	95	133	170	105	183	260	–	–	–
N	1–2	400	1725	3050	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
N	3	295	1368	2440	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	23	38	52	23	38	52	23	39	55	23	36	48	–	–	–	–	–	–
	2	–	–	–	22	34	46	22	34	46	22	35	48	21	33	44	–	–	–	–	–	–
	3	–	–	–	25	39	53	25	39	53	25	40	55	24	38	51	–	–	–	–	–	–
	4	–	–	–	36	56	75	36	56	75	36	58	79	35	54	73	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	50	78	105	50	80	110

Recommended Starting Speeds [SFM]

Material Group		GH1			X700			KCM40			SP6519			X500			MP91M			SC6525
P	1	–	–	–	–	–	–	–	–	–	426	697	459	426	656	886	459	795	1132	459	836	1214
	2	–	–	–	–	–	–	–	–	–	377	615	394	377	582	787	394	697	1000	394	730	1066
	3	–	–	–	–	–	–	328	558	787	328	541	344	328	508	689	344	615	886	344	648	951
	4	–	–	–	–	–	–	246	418	590	246	410	262	246	385	525	262	467	672	262	476	689
	5	–	–	–	230	338	443	–	–	–	246	410	230	230	328	426	–	–	–	262	394	525
	6	–	–	–	164	272	377	–	–	–	230	344	164	164	262	361	–	–	–	197	328	459
M	1	–	–	–	377	615	853	377	615	853	377	631	394	377	599	820	–	–	–	394	672	951
	2	–	–	–	344	549	754	328	541	754	344	558	361	328	525	722	–	–	–	361	607	853
	3	–	–	–	279	451	623	164	271	377	279	459	295	262	426	590	–	–	–	295	492	689
K	1	443	697	951	–	–	–	–	–	–	459	713	476	394	656	918	476	836	1197	476	877	1279
	2	394	599	804	–	–	–	–	–	–	361	574	377	344	508	672	377	656	935	377	689	1000
	3	377	517	656	–	–	–	–	–	–	328	525	344	312	435	558	344	599	853	–	–	–
N	1–2	1312	5658	10004	–	–	–	–	–	–	–	–	1312	–	–	–	–	–	–	–	–	–
	3	968	4485	8003	–	–	–	–	–	–	–	–	968	–	–	–	–	–	–	–	–	–
S	1	–	–	–	75	123	171	75	123	171	75	128	79	75	116	157	–	–	–	–	–	–
	2	–	–	–	72	112	151	72	112	151	72	115	75	69	107	144	–	–	–	–	–	–
	3	–	–	–	82	128	174	82	128	174	82	131	85	79	123	167	–	–	–	–	–	–
	4	–	–	–	118	182	246	118	182	246	118	189	121	115	177	239	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	164	–	–	–	164	254	344	164	262	361

Material Group		GH1			X700			KCM40			SP6519			X500			MP91M			SC6525
P	1	–	–	–	–	–	–	–	–	–	426	697	968	426	656	886	459	795	1132	459	836	1214
	2	–	–	–	–	–	–	–	–	–	377	615	853	377	582	787	394	697	1000	394	730	1066
	3	–	–	–	–	–	–	328	558	787	328	541	754	328	508	689	344	615	886	344	648	951
	4	–	–	–	–	–	–	246	418	590	246	410	574	246	385	525	262	467	672	262	476	689
	5	–	–	–	230	338	443	–	–	–	246	410	574	230	328	426	–	–	–	262	394	525
	6	–	–	–	164	272	377	–	–	–	230	344	459	164	262	361	–	–	–	197	328	459
M	1	–	–	–	377	615	853	377	615	853	377	631	886	377	599	820	–	–	–	394	672	951
	2	–	–	–	344	549	754	328	541	754	344	558	771	328	525	722	–	–	–	361	607	853
	3	–	–	–	279	451	623	164	271	377	279	459	640	262	426	590	–	–	–	295	492	689
K	1	443	697	951	–	–	–	–	–	–	459	713	968	394	656	918	476	836	1197	476	877	1279
	2	394	599	804	–	–	–	–	–	–	361	574	787	344	508	672	377	656	935	377	689	1000
	3	377	517	656	–	–	–	–	–	–	328	525	722	312	435	558	344	599	853	–	–	–
N	1–2	1312	5658	10004	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
N	3	968	4485	8003	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	75	123	171	75	123	171	75	128	180	75	116	157	–	–	–	–	–	–
	2	–	–	–	72	112	151	72	112	151	72	115	157	69	107	144	–	–	–	–	–	–
	3	–	–	–	82	128	174	82	128	174	82	131	180	79	123	167	–	–	–	–	–	–
	4	–	–	–	118	182	246	118	182	246	118	189	259	115	177	239	–	–	–	–	–	–
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	164	254	344	164	262	361

View MoreView Less

Insert Selection

Material Group	Light Machining		General Purpose		Heavy Machining
–	(Light geometry)		–		(Strong geometry)
–	wear resistance				toughness
–	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	442-X8	SC6525	432-X5	SC6525	GD-X5	KCM40
P3–P4	432-X8	SP6519	432-X5	SP6519	GD-X5	KCM40
P5–P6	432-X8	SP6519	T-X4	SP6519	T-X4	X500
M1–M2	442-X8	SC6525	432-X5	SC6525	GD-X5	KCM40
M3	432-X8	SP6519	GD-X5	KCM40	442-X4	X500
K1–K2	T-X4	MP91M	T-X4	MP91M	T-X4	MP91M
K3	T-X4	MP91M	T-X4	MP91M	T-X4	MP91M
N1–N2	701-X4	GH1	701-X4	GH1	701-X4	GH1
N3	701-X4	GH1	701-X4	GH1	701-X4	GH1
S1–S2	442-X5	SP6519	GD-X5	KCM40	442-X4	X500
S3	442-X5	SP6519	GD-X5	KCM40	442-X4	X500
S4	442-X5	SP6519	442-X5	X500	442-X4	X500
H1	–	–	T-X4	MP91M	–	–

Material Group	Light Machining		General Purpose		Heavy Machining
	(Light geometry)		General Purpose		(Strong geometry)
	wear resistance				toughness
	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	442-X8	SC6525	432-X5	SC6525	GD-X5	KCM40
P3–P4	432-X8	SP6519	432-X5	SP6519	GD-X5	KCM40
P5–P6	432-X8	SP6519	T-X4	SP6519	T-X4	X500
M1–M2	442-X8	SC6525	432-X5	SC6525	GD-X5	KCM40
M3	432-X8	SP6519	GD-X5	KCM40	442-X4	X500
K1–K2	T-X4	MP91M	T-X4	MP91M	T-X4	MP91M
K3	T-X4	MP91M	T-X4	MP91M	T-X4	MP91M
N1–N2	701-X4	GH1	701-X4	GH1	701-X4	GH1
N3	701-X4	GH1	701-X4	GH1	701-X4	GH1
S1–S2	442-X5	SP6519	GD-X5	KCM40	442-X4	X500
S3	442-X5	SP6519	GD-X5	KCM40	442-X4	X500
S4	442-X5	SP6519	442-X5	X500	442-X4	X500
H1	–	–	T-X4	MP91M	–	–

View MoreView Less

You are about to leave the Solution building process.

Are you sure you want to leave?

Material Number	6968680
ISO Catalog ID	RPPT1204M0E432X5
ANSI Catalog ID	RPPT1204M0E432X5
Grade	K00446
[D] Insert IC Size	12 mm
[D] Insert IC Size	0.472 in
[S] Insert Thickness	4.763 mm
[S] Insert Thickness	0.1875 in
Insert Number of Indexes	5

Welcome

Please confirm your preferences

Update Preferences

Product Suggestions

Product Family suggestions

Chat Now

Call (833) 893-1514

Message Sales

Chat Now

Call (833) 893-1514

Nachricht an Vertriebsteam

Editing Solution

Adding Solution

Product Similar To :

7713VR12 • Carbide Insert • RPPT-432-X5 • Medium Machining of Stainless Steel and High Temp Alloys

Copy milling insert with five cutting edges

Material Number6968680

ISO Catalog IDRPPT1204M0E432X5ANSI Catalog IDRPPT1204M0E432X5

Features and benefits

Feeds

At 6,00 Axial Depth of Cut (ap)

At 3,00 Axial Depth of Cut (ap)

At 2,50 Axial Depth of Cut (ap)

At 1,50 Axial Depth of Cut (ap)

At .236 Axial Depth of Cut (ap)

At .118 Axial Depth of Cut (ap)

At .098 Axial Depth of Cut (ap)

At .059 Axial Depth of Cut (ap)

Speeds

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Insert Selection

Product Suggestions

Product Family suggestions

Chat Now

Call (833) 893-1514

Message Sales

Notifications

Chat Now

Call (833) 893-1514

Nachricht an Vertriebsteam

Product Similar To :

7713VR12 • Carbide Insert • RPPT-432-X5 • Medium Machining of Stainless Steel and High Temp Alloys

Copy milling insert with five cutting edges

Material Number6968680

ISO Catalog IDRPPT1204M0E432X5ANSI Catalog IDRPPT1204M0E432X5

Sending to {{cadTool}} in progress...

Features and benefits

Feeds

At 6,00 Axial Depth of Cut (ap)

At 3,00 Axial Depth of Cut (ap)

At 2,50 Axial Depth of Cut (ap)

At 1,50 Axial Depth of Cut (ap)

At .236 Axial Depth of Cut (ap)

At .118 Axial Depth of Cut (ap)

At .098 Axial Depth of Cut (ap)

At .059 Axial Depth of Cut (ap)

Speeds

Recommended Starting Speeds [m/min]

Recommended Starting Speeds [SFM]

Insert Selection

The following files are available