Product Similar To:
DFS KM40TS Shank • KM50TS Shank • 3 x D • Right Hand • Inch
Drill Fix™ DFSP™ Bodies
Material Number4122650
ISO Catalog IDKM63TSDFS1625R3ANSI Catalog IDKM63TSDFS1625R3
- P Steel
- M Stainless Steel
- K Cast Iron
- N Non-Ferrous
- S High-Temp Alloys
- H Hardened Materials
- Drilling
- Drilling: Inclined Entry
- Drilling: Inclined Exit
- Drilling: X-Offset
- Drilling: Convex
- Shank - KM-TS ISO 26622
- Through Coolant: Radial: Indexable Drilling
- Drilling: Blind
- Chain Drilling
- Drilling: Cross-Hole Drilling
- Drilling: Half-Cylindrical Drilling
- Drilling: Corner Drilling 45°
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Overview
- Application Data
- Downloads
- Compatible Parts Machine Side
- Compatible Parts Workpiece Side
- Reviews
- Q&A
Material Number | 4122650 |
ISO Catalog ID | KM63TSDFS1625R3 |
ANSI Catalog ID | KM63TSDFS1625R3 |
[CSMS] System Size Machine Side | KM63TS |
[D1] Drill Diameter M | 41.275 mm |
[D1] Drill Diameter M | 1.625 in |
[D1MAX] Drill Diameter Maximum | 42.291 mm |
[D1MAX] Drill Diameter Maximum | 1.665 in |
[L1] Insert Gage Length | 177.8 mm |
[L1] Insert Gage Length | 7 in |
[L4] Maximum Drilling Depth | 123.825 mm |
[L4] Maximum Drilling Depth | 4.875 in |
[L5] Drill Point Length | 1.051 mm |
[L5] Drill Point Length | .0414 in |
Gage Insert | SPPX1204. |
Gage Insert 2 | DFT0704. |
Workpiece Materials
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous
- High-Temp Alloys
- Hardened Materials
Uses and application
- Drilling
- Drilling: Inclined Entry
- Drilling: Inclined Exit
- Drilling: X-Offset
- Drilling: Convex
- Shank - KM-TS ISO 26622
- Through Coolant: Radial: Indexable Drilling
- Drilling: Blind
- Chain Drilling
- Drilling: Cross-Hole Drilling
- Drilling: Half-Cylindrical Drilling
- Drilling: Corner Drilling 45°
Features and benefits
- DFSP combines the economical squared outboard insert with the superior centering capabilities of the trigon inboard insert.
- Benefit from the KM-TS™ coupling as most precise and most stable tooling system allowing fully automated tool changing.
- Drill shipped with insert screws, side pipe plug, and Torx wrench.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
Warning
Warnings • Drill Fix DFR
WARNING During through-hole operations, a slug or disc is produced as the tool breaks through the workpiece. When the drill is stationary and the workpiece is rotating, this slug may be hurled from the chuck by centrifugal force. Provide adequate shielding to protect bystanders. |
Application Data
I have read and accepted the Terms & Conditions of use