Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
HexaCut™ 60° • Face Mills • Shell Mills • Cast Iron • Right Hand • Roughing • Metric
Shell Mills • Roughing
Metric
Inch
| SAP Material Number | 2016195 |
| ISO Catalog Number | 250C246RF60HN09S |
| ANSI Catalog Number | 250C246RF60HN09S |
| [D1] Effective Cutting Diameter | 250.0000 mm |
| [D1] Effective Cutting Diameter | 9.842 in |
| [D1MAX] Maximum Cutting Diameter | 258.7000 mm |
| [D1MAX] Maximum Cutting Diameter | 10.185 in |
| [D] Adapter / Shank / Bore Diameter | 250.0 mm |
| [D] Adapter / Shank / Bore Diameter | 9.842 in |
| [L] Overall Length | 55.0000 mm |
| [L] Overall Length | 2.165 in |
| [AP1MAX] 1st Maximum Cutting Depth | 8.0000 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .3150 in |
| Number of Inserts | 30 |
| Number of Adjustable Inserts | 6 |
| Weight Kilograms | 12.10 |
| Max RPM | 2000 |
Uses and application
Face Milling
Milling - Side and Face
Workpiece Materials
K
Cast Iron
N
Non-Ferrous
Features and benefits
- Monoblock cutter design.
- High feed rates.
- CGI milling solution.
- Twelve cutting edges per insert.
Machine Side
loading...
Workpiece Side
loading...
Insert Selection Guide
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| (Light geometry) | – | (Strong geometry) | ||||
| wear resistance |  <="" td=""> | toughness | ||||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | – | – | – | – | – | – |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | .E..LE | KCK15 | .S..GE | KCK15 | .S..GE | KCK15 |
| K3 | .E..LE | KCK15 | .S..GE | KC514M | .S..GE | KCK15 |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
Recommended Starting Feeds [mm]
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40% 100% | ||||||||||||
| ...MCI | 0,21 | 0,53 | 0,93 | 0,15 | 0,38 | 0,67 | 0,11 | 0,29 | 0,50 | 0,10 | 0,25 | 0,44 | 0,09 | 0,23 | 0,40 | ...MCI |
| .E..LE | 0,21 | 0,52 | 0,95 | 0,15 | 0,38 | 0,68 | 0,11 | 0,28 | 0,51 | 0,10 | 0,25 | 0,44 | 0,09 | 0,23 | 0,41 | .E..LE |
| ...MR | 0,27 | 0,59 | 1,03 | 0,20 | 0,42 | 0,74 | 0,15 | 0,32 | 0,55 | 0,13 | 0,28 | 0,48 | 0,12 | 0,25 | 0,44 | ...MR |
| .S..GE | 0,27 | 0,68 | 1,10 | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,29 | 0,47 | .S..GE |
| ...SN | 0,27 | 0,68 | 1,10 | 0,20 | 0,49 | 0,79 | 0,15 | 0,37 | 0,59 | 0,13 | 0,32 | 0,51 | 0,12 | 0,29 | 0,47 | ...SN |
| Light Machining | General Purpose | Heavy Machining |
Recommended Starting Speeds [m/min]
| Material Group | KCK15 | KCPK30 | KC514M | KC524M | KC907M | KC914M | KC917M | KC924M | KY3500 | |||||||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 505 | 460 | 410 | 355 | 320 | 285 | 480 | 350 | 255 | 450 | 320 | 230 | 490 | 365 | 305 | 420 | 360 | 300 | 360 | 300 | 240 | 350 | 275 | 200 | 965 | 880 | 780 |
| 2 | 400 | 355 | 330 | 280 | 255 | 230 | 420 | 280 | 205 | 390 | 250 | 190 | 385 | 300 | 250 | 360 | 300 | 250 | 300 | 240 | 200 | 275 | 220 | 175 | 765 | 685 | 635 | |
| 3 | 335 | 300 | 275 | 235 | 210 | 195 | 335 | 260 | 200 | 300 | 225 | 160 | 300 | 250 | 200 | 300 | 250 | 200 | 240 | 200 | 160 | 220 | 175 | 140 | 645 | 570 | 525 | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |