Drilling
Drilling: Stacked PlatesDownloaded file will be available after import in the {{cadTool}} tool library.
| Material Number | 6768940 |
| ISO Catalog ID | B556H07938DALP |
| ANSI Catalog ID | B556H07938DALP |
| Grade | KCC05 |
| [D1] Drill Diameter M | 7.938 mm |
| [D1] Drill Diameter M | 0.3125 in |
| [L] Overall Length | 80 mm |
| [L] Overall Length | 3.1496 in |
| [L3] Flute Length | 38 mm |
| [L3] Flute Length | 1.4961 in |
| [L4] Maximum Drilling Depth | 30 mm |
| [L4] Maximum Drilling Depth | 1.1811 in |
| [L5] Drill Point Length | 1.41 mm |
| [L5] Drill Point Length | 0.0555 in |
| [LS] Shank Length | 42 mm |
| [LS] Shank Length | 1.6535 in |
| [D] Adapter / Shank / Bore Diameter | 8 mm |
| [D] Adapter / Shank / Bore Diameter | 0.315 in |
DrillingDrilling: Stacked PlatesGrades
KCC05
Composition: Multilayered CVD diamond-coated, submicron-grain carbide.
Application: First choice for machining carbon-fiber reinforced polymers (CFRPs). This grade offers best wear resistance and highest tool life in most CFRP materials.
Create Solution to calculate Feeds and Speeds
After creating a solution just choose the Feeds & Speeds icon and our system will provide recommendations. You can customize the information by adding your machine and specifications or make adjustments using the sliders.
| Material |  |  | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 2 | 80 | 120 | 150 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 |
| 3 | 10 | 15 | 25 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 | |
| 4 | 10 | 25 | 50 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 | |
| Material | Cutting Speed | Inch | |||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| C | 2 | 260 | 390 | 490 | IPR | .001 | .001 | .001 | .002 | .002 | .002 | .002 | .003 |
| 3 | 30 | 50 | 80 | IPR | .001 | .001 | .001 | .002 | .002 | .002 | .002 | .003 | |
| 4 | 30 | 80 | 160 | IPR | .001 | .001 | .001 | .002 | .002 | .002 | .002 | .003 | |
| Material | |  | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 2 | 80 | 120 | 150 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 |
| 3 | 10 | 15 | 25 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 | |
| 4 | 10 | 25 | 50 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 | |
| Material |  |  | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 2 | 15 | 80 | 120 | mm/r | 0,01–0,05 | 0,02–0,07 | 0,03–0,10 | 0,04–0,12 | 0,05–0,15 | 0,05–0,18 | 0,06–0,21 | 0,07–0,23 |
| 3 | 10 | 10 | 15 | mm/r | 0,01–0,05 | 0,02–0,07 | 0,03–0,10 | 0,04–0,12 | 0,05–0,15 | 0,05–0,18 | 0,06–0,21 | 0,07–0,23 | |
| 4 | 10 | 15 | 25 | mm/r | 0,01–0,05 | 0,02–0,07 | 0,03–0,10 | 0,04–0,12 | 0,05–0,15 | 0,05–0,18 | 0,06–0,21 | 0,07–0,23 | |
| Material | | | |||||||||||
| Material | Cutting Speed | Inch | |||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| C | 2 | 50 | 260 | 390 | IPR | .000–.002 | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 | .003–.009 |
| 3 | 30 | 30 | 50 | IPR | .001–.002 | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 | .003–.009 | |
| 4 | 30 | 50 | 80 | IPR | .001–.002 | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 | .003–.009 | |
| | ||||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Min | Starting Value | Max | 3.0 | 4.0 | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | ||
| C | 2 | 15 | 80 | 120 | mm/dev | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.05 | 0.06 | 0.07 |
| 3 | 10 | 10 | 15 | mm/dev | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.05 | 0.06 | 0.07 | |
| 4 | 10 | 15 | 25 | mm/dev | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.05 | 0.06 | 0.07 | |
| Material | |  | |||||||||||
| Material | Cutting Speed | Inch | |||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| C | 2 | 50 | 390 | 490 | IPR | .000–.002 | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 | .003–.009 |
| 3 | 30 | 50 | 80 | IPR | .001–.002 | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 | .003–.009 | |
| 4 | 30 | 80 | 160 | IPR | .001–.002 | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 | .003–.009 | |
| Material | | | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 2 | 15 | 120 | 150 | mm/r | 0,01–0,05 | 0,02–0,07 | 0,03–0,10 | 0,04–0,12 | 0,05–0,15 | 0,05–0,18 | 0,06–0,21 | 0,07–0,23 |
| 3 | 10 | 15 | 25 | mm/r | 0,01–0,05 | 0,02–0,07 | 0,03–0,10 | 0,04–0,12 | 0,05–0,15 | 0,05–0,18 | 0,06–0,21 | 0,07–0,23 | |
| 4 | 10 | 25 | 50 | mm/r | 0,01–0,05 | 0,02–0,07 | 0,03–0,10 | 0,04–0,12 | 0,05–0,15 | 0,05–0,18 | 0,06–0,21 | 0,07–0,23 | |
| | ||||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate (f) by Diameter | ||||||||||||
| Material | Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| N | 1 | 120 | 230 | 450 | mm/ot. | 0.12 | 0.13 | 0.15 | 0.19 | 0.26 | 0.31 | 0.41 | 0.44 |
| 2 | 120 | 220 | 350 | mm/ot. | 0.13 | 0.14 | 0.16 | 0.20 | 0.28 | 0.33 | 0.44 | 0.48 | |
| 3 | 100 | 180 | 400 | mm/ot. | 0.13 | 0.14 | 0.16 | 0.20 | 0.28 | 0.33 | 0.44 | 0.48 | |
| 4 | 100 | 130 | 300 | mm/ot. | 0.10 | 0.12 | 0.14 | 0.16 | 0.18 | 0.20 | 0.24 | 0.28 | |
| C | 2 | 15 | 120 | 150 | mm/ot. | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.05 | 0.06 | 0.07 |
| 3 | 10 | 15 | 25 | mm/ot. | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.05 | 0.06 | 0.07 | |
| 4 | 10 | 25 | 50 | mm/ot. | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.05 | 0.06 | 0.07 | |
| Material | Cutting Speed | Inch | |||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| C | 2 | 230 | 360 | 460 | IPR | .001 | .002 | .002 | .002 | .002 | .003 |
| Material | |  |  | ||||||||
| Cutting Speed | Metric | ||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 2 | 70 | 110 | 140 | mm/r | 0.03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 |
| Material | | | |||||||||
| Cutting Speed | Metric | ||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 2 | 70 | 110 | 140 | mm/tr | 0.03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 |
| Material | Cutting Speed | Metric | |||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| S | 4 | 10 | 13 | 20 | mm/r | 0,02–0,08 | 0,03–0,10 | 0,04–0,12 | 0,05–0,16 | 0,05–0,18 | 0,06–0,20 |
| N | 1 | 100 | 230 | 270 | mm/r | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 |
| 2 | 100 | 220 | 270 | mm/r | 0,14–0,23 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
| 3 | 90 | 180 | 230 | mm/r | 0,13–0,22 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
| 4 | 90 | 130 | 200 | mm/r | 0,10–0,18 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,52 | |
| C | 2 | 70 | 110 | 140 | mm/r | 0,03-0,10 | 0,04-0,12 | 0,05-0,15 | 0,05-0,18 | 0,06-0,21 | 0,07-0,23 |
| 3 | 10 | 13 | 20 | mm/r | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
| 4 | 10 | 20 | 40 | mm/r | 0,02-0,08 | 0,03-0,10 | 0,04-0,12 | 0,05-0,16 | 0,05-0,18 | 0,06-0,20 | |
| Material | Cutting Speed | Inch | |||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| S | 4 | 30 | 40 | 70 | IPR | .001–.003 | .001–.004 | .002–.005 | .002–.006 | .002–.007 | .002–.008 |
| N | 1 | 330 | 750 | 890 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 |
| 2 | 330 | 720 | 890 | IPR | .006–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.017 | .013–.021 | |
| 3 | 300 | 590 | 750 | IPR | .005–.009 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 | |
| 4 | 300 | 430 | 660 | IPR | .004–.007 | .006–.011 | .008–.013 | .009–.014 | .011–.016 | .013–.019 | |
| C | 4 | 230 | 360 | 460 | IPR | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | .003-.009 |
| 4 | 30 | 40 | 70 | IPR | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
| 4 | 30 | 70 | 130 | IPR | .001-.003 | .001-.004 | .002-.005 | .002-.006 | .002-.007 | .002-.008 | |
| Material | Cutting Speed | Metric | |||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||
| Min | Starting Value | Max | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | |||
| S | 4 | 10 | 13 | 20 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 |
| N | 1 | 100 | 230 | 270 | mm/r | 0.13～0.22 | 0.16～0.24 | 0.20～0.28 | 0.24～0.32 | 0.28～0.40 | 0.32～0.48 |
| 2 | 100 | 220 | 270 | mm/r | 0.14～0.23 | 0.16～0.28 | 0.20～0.32 | 0.24～0.36 | 0.28～0.40 | 0.32～0.52 | |
| 3 | 90 | 180 | 230 | mm/r | 0.13～0.22 | 0.16～0.24 | 0.20～0.28 | 0.24～0.32 | 0.28～0.40 | 0.32～0.48 | |
| 4 | 90 | 130 | 200 | mm/r | 0.10～0.18 | 0.16～0.28 | 0.20～0.32 | 0.24～0.36 | 0.28～0.40 | 0.32～0.52 | |
| C | 2 | 70 | 110 | 140 | mm/r | 0.03～0.10 | 0.04～0.12 | 0.05～0.15 | 0.05～0.18 | 0.06～0.21 | 0.07～0.23 |
| 3 | 10 | 13 | 20 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 | |
| 4 | 10 | 20 | 40 | mm/r | 0.02～0.08 | 0.03～0.10 | 0.04～0.12 | 0.05～0.16 | 0.05～0.18 | 0.06～0.20 | |
| Material | |  | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 2 | 80 | 120 | 150 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 |
| 3 | 10 | 15 | 25 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 | |
| 4 | 10 | 25 | 50 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 | |
| S | 4 | 10 | 15 | 25 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 |
| N | 1 | 100 | 230 | 270 | mm/r | 0,13 | 0,14 | 0,17 | 0,21 | 0,27 | 0,33 | 0,37 | 0,43 |
| 2 | 100 | 220 | 270 | mm/r | 0,14 | 0,15 | 0,17 | 0,22 | 0,29 | 0,34 | 0,39 | 0,45 | |
| 3 | 90 | 180 | 230 | mm/r | 0,13 | 0,14 | 0,16 | 0,20 | 0,28 | 0,33 | 0,38 | 0,44 | |
| 4 | 90 | 130 | 200 | mm/r | 0,10 | 0,12 | 0,14 | 0,16 | 0,18 | 0,20 | 0,24 | 0,28 | |
| Material | Cutting Speed | Inch | |||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| C | 2 | 260 | 390 | 490 | IPR | .001 | .001 | .001 | .002 | .002 | .002 | .002 | .003 |
| 3 | 30 | 50 | 80 | IPR | .001 | .001 | .001 | .002 | .002 | .002 | .002 | .003 | |
| 4 | 30 | 80 | 160 | IPR | .001 | .001 | .001 | .002 | .002 | .002 | .002 | .003 | |
| S | 4 | 30 | 50 | 80 | IPR | .001 | .001 | .001 | .002 | .002 | .002 | .002 | .003 |
| N | 1 | 330 | 750 | 890 | IPR | .005 | .006 | .007 | .008 | .011 | .013 | .015 | .017 |
| 2 | 330 | 720 | 890 | IPR | .006 | .006 | .007 | .009 | .011 | .013 | .015 | .018 | |
| 3 | 300 | 590 | 750 | IPR | .005 | .006 | .006 | .008 | .011 | .013 | .015 | .017 | |
| 4 | 300 | 430 | 660 | IPR | .004 | .005 | .006 | .006 | .007 | .008 | .009 | .011 | |
| Material | | | |||||||||||
| Cutting Speed | Metric | ||||||||||||
| Range | Recommended Feed Rate per Rev | ||||||||||||
| Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| C | 2 | 80 | 120 | 150 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 |
| 3 | 10 | 15 | 25 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 | |
| 4 | 10 | 25 | 50 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 | |
| S | 4 | 10 | 15 | 25 | mm/r | 0,01 | 0,02 | 0,03 | 0,04 | 0,05 | 0,05 | 0,06 | 0,07 |
| N | 1 | 100 | 230 | 270 | mm/r | 0,13 | 0,14 | 0,17 | 0,21 | 0,27 | 0,33 | 0,37 | 0,43 |
| 2 | 100 | 220 | 270 | mm/r | 0,14 | 0,15 | 0,17 | 0,22 | 0,29 | 0,34 | 0,39 | 0,45 | |
| 3 | 90 | 180 | 230 | mm/r | 0,13 | 0,14 | 0,16 | 0,20 | 0,28 | 0,33 | 0,38 | 0,44 | |
| 4 | 90 | 130 | 200 | mm/r | 0,10 | 0,12 | 0,14 | 0,16 | 0,18 | 0,20 | 0,24 | 0,28 | |
| Tolerance • Inch | ||
| nominal size range | D1 tolerance k6 | D tolerance h6 |
| .0000/.0004 | .0000/-.0003 | |
| .0000/.0004 | .0000/-.0004 | |
| .0000/.0005 | .0000/-.0004 | |
| .0000/.0006 | .0000/-.0005 | |
| Tolerance • Metric | ||
| nominal size range | D1 tolerance k6 | D tolerance h6 |
| 0,001/0,009 | 0,000/-0,008 | |
| 0,001/0,010 | 0,000/-0,009 | |
| 0,001/0,012 | 0,000/-0,011 | |
| 0,002/0,015 | 0,000/-0,013 | |
I have read and accepted the Terms & Conditions of use
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
Models
Product data
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?