| SAP Material Number | 1990689 |
| ISO Catalog Number | SECW1404AEENGNW |
| ANSI Catalog Number | SECW443AEEN22GNW |
| Grade | KC725M |
| [D] Insert IC Size | 14.0000 mm |
| [D] Insert IC Size | .5512 in |
| [BS] Corner Facet Length | 8.2630 mm |
| [BS] Corner Facet Length | .3253 in |
| [L10] Insert Cutting Edge Length | 8.2630 mm |
| [L10] Insert Cutting Edge Length | .3253 in |
| [Rε] Corner Radius | 1.6000 mm |
| [Rε] Corner Radius | .0625 in |
| [S] Insert Thickness | 4.7630 mm |
| [S] Insert Thickness | .1875 in |
| Average Chip Thickness [HM] | 0.0380 mm |
| Average Chip Thickness [HM] | .0015 in |
| Cutting Edges per Insert | 2 |
Coated carbide grade with an advanced PVD TiAlN coating. KC725M is a high-performance grade for milling steel, stainless steel, and high-temperature alloys. The good thermal shock resistance of the substrate makes this grade ideal for both wet and dry machining. Primarily for use in general and heavy machining.
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| (Light geometry) | – | (Strong geometry) | ||||
| wear resistance |  <="" td=""> | toughness | ||||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..GP2 | KCPM40 | .E..GB2 | KCPM40 | .S..GB2 | KCPM40 |
| P3–P4 | .E..GP2 | KCPK30 | .E..GB2 | KCPK30 | .S..GB2 | KCPK30 |
| P5–P6 | .E..GP2 | KC725M | .E..GB2 | KC725M | .S..GB2 | KC725M |
| M1–M2 | .E..LD2 | KC725M | .E..GP2 | KC725M | .S..GP2 | KC725M |
| M3 | .E..GP2 | KCPM40 | .E..GB2 | KCPM40 | .S..GP2 | KCPM40 |
| K1–K2 | .E..GP2 | KCK15 | .E..GB2 | KCK15 | .S..GB2 | KCK15 |
| K3 | .E..GP2 | KC520M | .E..GB2 | KC520M | .S..GB2 | KC520M |
| N1–N2 | .F..LE | KC410M | .F..LE | KC410M | .F..LE | KC410M |
| N3 | .F..LE | KC410M | .F..LE | KC410M | .F..LE | KC410M |
| S1–S2 | .E..LD2 | KC725M | .E..GP2 | KC725M | .S..GP2 | KC725M |
| S3 | .E..GB2 | KC725M | .S..GP2 | KC725M | .S..GB2 | KC725M |
| S4 | .E..GB2 | KC725M | .S..GP2 | KC725M | .S..GB2 | KC725M |
| H1 | – | – | – | – | – | – |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LE | 0,17 | 0,59 | 0,99 | 0,12 | 0,43 | 0,71 | 0,09 | 0,32 | 0,53 | 0,08 | 0,28 | 0,46 | 0,07 | 0,25 | 0,42 | .F..LE |
| .E..LD2 | 0,17 | 0,62 | 1,15 | 0,13 | 0,45 | 0,82 | 0,10 | 0,34 | 0,61 | 0,08 | 0,29 | 0,53 | 0,08 | 0,27 | 0,49 | .E..LD2 |
| .E..LD | 0,24 | 0,67 | 1,17 | 0,17 | 0,48 | 0,84 | 0,13 | 0,36 | 0,62 | 0,11 | 0,31 | 0,54 | 0,10 | 0,29 | 0,50 | .E..LD |
| .E..GP | 0,17 | 0,62 | 1,26 | 0,13 | 0,45 | 0,90 | 0,10 | 0,34 | 0,67 | 0,08 | 0,29 | 0,59 | 0,08 | 0,27 | 0,54 | .E..GP |
| .E..GP2 | 0,24 | 0,74 | 1,27 | 0,17 | 0,53 | 0,91 | 0,13 | 0,40 | 0,68 | 0,11 | 0,35 | 0,59 | 0,10 | 0,32 | 0,54 | .E..GP2 |
| .E..GB2 | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .E..GB2 |
| .S..GP2 | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..GP2 |
| .S..GB2 | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..GB2 |
| .S..GN | 0,33 | 0,84 | 1,35 | 0,24 | 0,60 | 0,97 | 0,18 | 0,45 | 0,72 | 0,16 | 0,39 | 0,63 | 0,14 | 0,36 | 0,57 | .S..GN |
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LE | .007 | .024 | .040 | .005 | .017 | .029 | .004 | .013 | .021 | .003 | .011 | .019 | .003 | .010 | .017 | .F..LE |
| .E..LD2 | .007 | .025 | .045 | .005 | .018 | .032 | .004 | .013 | .024 | .003 | .012 | .021 | .003 | .011 | .019 | .E..LD2 |
| .E..LD | .009 | .026 | .046 | .007 | .019 | .033 | .005 | .014 | .024 | .004 | .012 | .021 | .004 | .011 | .020 | .E..LD |
| .E..GP | .007 | .025 | .050 | .005 | .018 | .036 | .004 | .013 | .027 | .003 | .012 | .023 | .003 | .011 | .021 | .E..GP |
| .E..GP2 | .009 | .029 | .050 | .007 | .021 | .036 | .005 | .016 | .027 | .004 | .014 | .023 | .004 | .012 | .021 | .E..GP2 |
| .E..GB2 | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .E..GB2 |
| .S..GP2 | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..GP2 |
| .S..GB2 | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..GB2 |
| .S..GN | .013 | .033 | .053 | .009 | .024 | .038 | .007 | .018 | .028 | .006 | .015 | .025 | .006 | .014 | .023 | .S..GN |
| Light Machining | General Purpose | Heavy Machining |
| Material Group | KC410M | KC520M | KC725M | KCK15 | KCPM20 | KCPK30 | KY3500 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 315 | 275 | 255 | – | – | – | 660 | 580 | 535 | 545 | 475 | 440 | – | – | – |
| 2 | – | – | – | – | – | – | 260 | 230 | 195 | – | – | – | 410 | 370 | 330 | 335 | 305 | 275 | – | – | – | |
| 3 | – | – | – | – | – | – | 240 | 205 | 170 | – | – | – | 370 | 330 | 305 | 305 | 275 | 250 | – | – | – | |
| 4 | – | – | – | – | – | – | 215 | 180 | 145 | – | – | – | 275 | 255 | 230 | 225 | 210 | 190 | – | – | – | |
| 5 | – | – | – | – | – | – | 180 | 160 | 145 | – | – | – | 330 | 300 | 275 | 310 | 275 | 255 | – | – | – | |
| 6 | – | – | – | – | – | – | 160 | 120 | 95 | – | – | – | 230 | 200 | 175 | 190 | 165 | – | – | – | – | |
| M | 1 | – | – | – | – | – | – | 205 | 180 | 165 | – | – | – | 270 | 240 | 205 | 250 | 220 | 190 | – | – | – |
| 2 | – | – | – | – | – | – | 185 | 160 | 130 | – | – | – | 245 | 215 | 190 | 225 | 195 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 140 | 120 | 95 | – | – | – | 195 | 175 | 150 | 175 | 160 | 140 | – | – | – | |
| K | 1 | – | – | – | 325 | 295 | 260 | – | – | – | 505 | 460 | 410 | 435 | 390 | 350 | 355 | 320 | 285 | 965 | 880 | 780 |
| 2 | – | – | – | 255 | 225 | 215 | – | – | – | 400 | 355 | 330 | 345 | 310 | 280 | 280 | 255 | 230 | 765 | 685 | 635 | |
| 3 | – | – | – | 215 | 190 | 170 | – | – | – | 335 | 300 | 275 | 290 | 255 | 240 | 235 | 210 | 195 | 645 | 570 | 525 | |
| N | 1–2 | 1460 | 1300 | 1195 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 1300 | 1195 | 1100 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 45 | 35 | 30 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 45 | 35 | 30 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 55 | 45 | 30 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 75 | 55 | 35 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| Material Group | KC410M | KC520M | KC725M | KCK15 | KCPM20 | KCPK30 | KY3500 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | 1030 | 900 | 840 | – | – | – | 2170 | 1910 | 1760 | 1780 | 1560 | 1450 | – | – | – |
| 2 | – | – | – | – | – | – | 860 | 760 | 640 | – | – | – | 1340 | 1210 | 1090 | 1100 | 1000 | 900 | – | – | – | |
| 3 | – | – | – | – | – | – | 790 | 670 | 550 | – | – | – | 1210 | 1090 | 1000 | 1000 | 900 | 820 | – | – | – | |
| 4 | – | – | – | – | – | – | 710 | 590 | 470 | – | – | – | 910 | 840 | 760 | 740 | 690 | 620 | – | – | – | |
| 5 | – | – | – | – | – | – | 590 | 530 | 470 | – | – | – | 1090 | 980 | 900 | 1020 | 910 | 830 | – | – | – | |
| 6 | – | – | – | – | – | – | 520 | 400 | 310 | – | – | – | 760 | 660 | 570 | 620 | 540 | - | – | – | – | |
| M | 1 | – | – | – | – | – | – | 670 | 590 | 540 | – | – | – | 880 | 790 | 680 | 820 | 720 | 620 | – | – | – |
| 2 | – | – | – | – | – | – | 610 | 520 | 430 | – | – | – | 800 | 700 | 620 | 730 | 640 | 550 | – | – | – | |
| 3 | – | – | – | – | – | – | 460 | 400 | 310 | – | – | – | 640 | 570 | 490 | 570 | 520 | 460 | – | – | – | |
| K | 1 | – | – | – | 1060 | 960 | 850 | – | – | – | 1660 | 1510 | 1340 | 1420 | 1280 | 1150 | 1160 | 1050 | 940 | 3170 | 2880 | 2560 |
| 2 | – | – | – | 830 | 740 | 700 | – | – | – | 1310 | 1170 | 1090 | 1130 | 1010 | 920 | 920 | 830 | 760 | 2510 | 2240 | 2090 | |
| 3 | – | – | – | 700 | 620 | 560 | – | – | – | 1100 | 980 | 900 | 950 | 840 | 780 | 770 | 690 | 640 | 2110 | 1870 | 1720 | |
| N | 1–2 | 4790 | 4260 | 3920 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 4260 | 3920 | 3600 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | 140 | 120 | 100 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 140 | 120 | 100 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 180 | 140 | 100 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | 240 | 180 | 120 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
