Editing Solution
Adding Solution
Solution Name: {{SolutionName}}Workpiece Materials
Features and benefits
- Centre cutting for plunging and ramping operations.
- Solid carbide end mill for micro machining and small parts machining.
- Solid carbide end mill for machining of steels, stainless steel, cast iron, and non-ferrous materials.
Machine Side
Workpiece Side
Grades
-
KC635M
Coated carbide grade with TiAlN coating. KC635M is a high-performance grade for higher speeds and is the first choice for stainless steels. KC635M grade is characterized by a high hardness and wear resistance. This grade is suitable for cutting hard materials (up to 65HRC).
P SteelK Cast IronM Stainless SteelN Non-Ferrous
End Mill Tolerances | |||
D1 | tolerance e8 | D | tolerance h6 + / - |
≤3 | -0,014/-0,028 | ≤3 | +0/-0,006 |
3–6 | -0,020/-0,038 | 3–6 | +0/-0,008 |
6–10 | -0,025/-0,047 | 6–10 | +0/-0,009 |
10–18 | -0,032/-0,059 | 10–18 | +0/-0,011 |
18–30 | -0,040/-0,073 | 18–30 | +0/-0,013 |
Material Group | ||||||||||||||||||
Side Milling (A) and Slotting (B) | KCPM15 | Feed per Tooth — fz information is for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||
A | B | Cutting Speed vc m/min | D1 Diameter | |||||||||||||||
ap | ae | ap | Min | Max | mm | 0,4 | 0,5 | 0,6 | 0,8 | 1,0 | 1,2 | 1,5 | 1,8 | 2,0 | 2,5 | 3,0 | ||
P | 0 | 1 x D | 0,1 x D | 0,25 x D | 150 | 200 | fz | 0,003 | 0,004 | 0,004 | 0,006 | 0,007 | 0,009 | 0,011 | 0,014 | 0,015 | 0,019 | 0,023 |
1 | 1 x D | 0,1 x D | 0,25 x D | 150 | 200 | fz | 0,003 | 0,004 | 0,004 | 0,006 | 0,007 | 0,009 | 0,011 | 0,014 | 0,015 | 0,019 | 0,023 | |
2 | 1 x D | 0,1 x D | 0,25 x D | 140 | 190 | fz | 0,003 | 0,004 | 0,004 | 0,006 | 0,007 | 0,009 | 0,011 | 0,014 | 0,015 | 0,019 | 0,023 | |
3 | 1 x D | 0,1 x D | 0,25 x D | 120 | 160 | fz | 0,002 | 0,003 | 0,004 | 0,005 | 0,006 | 0,007 | 0,009 | 0,011 | 0,012 | 0,016 | 0,019 | |
4 | 1 x D | 0,1 x D | 0,25 x D | 90 | 150 | fz | 0,002 | 0,003 | 0,003 | 0,005 | 0,006 | 0,007 | 0,009 | 0,010 | 0,012 | 0,014 | 0,017 | |
M | 1 | 1 x D | 0,1 x D | 0,25 x D | 90 | 115 | fz | 0,002 | 0,003 | 0,004 | 0,005 | 0,006 | 0,007 | 0,009 | 0,011 | 0,012 | 0,016 | 0,019 |
2 | 1 x D | 0,1 x D | 0,25 x D | 60 | 80 | fz | 0,002 | 0,003 | 0,003 | 0,004 | 0,005 | 0,006 | 0,008 | 0,009 | 0,010 | 0,013 | 0,016 | |
K | 1 | 1 x D | 0,1 x D | 0,25 x D | 120 | 150 | fz | 0,003 | 0,004 | 0,004 | 0,006 | 0,007 | 0,009 | 0,011 | 0,014 | 0,015 | 0,019 | 0,023 |
2 | 1 x D | 0,1 x D | 0,25 x D | 110 | 140 | fz | 0,002 | 0,003 | 0,004 | 0,005 | 0,006 | 0,007 | 0,009 | 0,011 | 0,012 | 0,016 | 0,019 | |
N | 1 | 1 x D | 0,1 x D | 0,25 x D | 500 | 2000 | fz | 0,004 | 0,006 | 0,007 | 0,009 | 0,011 | 0,013 | 0,017 | 0,020 | 0,022 | 0,028 | 0,033 |
2 | 1 x D | 0,1 x D | 0,25 x D | 500 | 1500 | fz | 0,004 | 0,005 | 0,006 | 0,008 | 0,010 | 0,012 | 0,015 | 0,018 | 0,020 | 0,025 | 0,030 | |
5 | 1 x D | 0,1 x D | 0,25 x D | 250 | 1000 | fz | 0,004 | 0,005 | 0,006 | 0,008 | 0,010 | 0,012 | 0,015 | 0,018 | 0,020 | 0,025 | 0,030 |