| SAP Material Number | 1951722 |
| ISO Catalog Number | 160B10RS36PD12 |
| ANSI Catalog Number | 160B10RS36PD12 |
| [D1MAX] Maximum Cutting Diameter | 160.0000 mm |
| [D1MAX] Maximum Cutting Diameter | 6.299 in |
| [D1] Effective Cutting Diameter | 141.2000 mm |
| [D1] Effective Cutting Diameter | 5.559 in |
| [D] Adapter / Shank / Bore Diameter | 40.0 mm |
| [D] Adapter / Shank / Bore Diameter | 1.574 in |
| [D6] Hub Diameter | 90.0000 mm |
| [D6] Hub Diameter | 3.543 in |
| [L] Overall Length | 55.0000 mm |
| [L] Overall Length | 2.165 in |
| [AP1MAX] 1st Maximum Cutting Depth | 5.5000 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .2165 in |
| Number of Inserts | 10 |
| Maximum Ramping Angle | 2.000 |
| Weight Kilograms | 2.90 |
| Gage Insert | PD_X1204__SNGN |
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1 - P2 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P3 - P4 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P5 - P6 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| M1 - M2 | ||||||
| M3 | ||||||
| K1 - K2 | .S..GN | KC510M | .S..GN | KC510M | ||
| K3 | .S..GN | KC510M | .S..GN | KC510M | ||
| N1 - N2 | ||||||
| N3 | ||||||
| S1 - S2 | ||||||
| S3 | ||||||
| S4 | ||||||
| H1 | ||||||
| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1 - P2 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P3 - P4 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| P5 - P6 | .S..GN | KC522M | .S..GN | KC715M | .S..GN | KC725M |
| M1 - M2 | ||||||
| M3 | ||||||
| K1 - K2 | .S..GN | KC510M | .S..GN | KC510M | ||
| K3 | .S..GN | KC510M | .S..GN | KC510M | ||
| N1 - N2 | ||||||
| N3 | ||||||
| S1 - S2 | ||||||
| S3 | ||||||
| S4 | ||||||
| H1 | ||||||
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .S..GN | 0,29 | 0,73 | 1,17 | 0,22 | 0,54 | 0,87 | 0,19 | 0,47 | 0,76 | 0,18 | 0,44 | 0,71 | 0,17 | 0,43 | 0,69 | .S..GN |
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .S..GN | 0,19 | 0,47 | 0,75 | 0,14 | 0,35 | 0,56 | 0,12 | 0,30 | 0,49 | 0,11 | 0,28 | 0,45 | 0,11 | 0,28 | 0,44 | .S..GN |
| Light Machining | General Purpose | Heavy Machining |
| Material Group | KC510M | KC522M | KC715M | KC725M | |||||||||
| P | 1 | – | – | – | 395 | 345 | 325 | 410 | 360 | 330 | 315 | 275 | 255 |
| 2 | – | – | – | 330 | 290 | 240 | 255 | 225 | 205 | 260 | 230 | 195 | |
| 3 | – | – | – | 305 | 255 | 215 | 225 | 205 | 185 | 240 | 205 | 170 | |
| 4 | 295 | 240 | 200 | 270 | 225 | 180 | 170 | 160 | 145 | 215 | 180 | 145 | |
| 5 | – | – | – | 225 | 200 | 180 | 235 | 205 | 190 | 180 | 160 | 145 | |
| 6 | – | – | – | 200 | 150 | 120 | 145 | 125 | – | 160 | 120 | 95 | |
| M | 1 | – | – | – | 245 | 215 | 200 | 270 | 235 | 215 | 205 | 180 | 165 |
| 2 | – | – | – | 225 | 190 | 160 | – | – | – | 185 | 160 | 130 | |
| 3 | – | – | – | 170 | 145 | 115 | – | – | – | 140 | 120 | 95 | |
| K | 1 | 350 | 315 | 285 | 275 | 250 | 220 | – | – | – | – | – | – |
| 2 | 275 | 250 | 230 | 215 | 195 | 180 | – | – | – | – | – | – | |
| 3 | 235 | 205 | 190 | 180 | 160 | 145 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
