| SAP Material Number | 5593680 |
| ISO Catalog Number | KTMDU16L2535N60 |
| ANSI Catalog Number | KTMDU16L2535N60 |
| Grade | KC635M |
| Thread Pitch Mimum | 2.5000 |
| Thread Pitch Maximum | 3.5000 |
| TPI Minimum | 7.000 |
| TPI Maximum | 10.000 |
| [D1] Insert Hole Size | 3.8500 mm |
| [D1] Insert Hole Size | .1516 in |
| [D] Insert IC Size | 9.5250 mm |
| [D] Insert IC Size | .3750 in |
| [L10] Insert Cutting Edge Length | 16.0000 mm |
| [L10] Insert Cutting Edge Length | .6299 in |
| [RC] Corner Radius Center | 0.1400 mm |
| [RC] Corner Radius Center | .0055 in |
Coated carbide grade with TiAlN coating. KC635M is a high-performance grade for higher speeds and is the first choice for stainless steels. KC635M grade is characterized by a high hardness and wear resistance. This grade is suitable for cutting hard materials (up to 65HRC).
| Materials | Brinell | surface speeds | indexable inserts | |
| steel | HB | KC610M | KC635M | feed fz (mm/tooth) |
| P1 | 125 | 100–210 | 90–180 | 0,05–0,20 |
| P2 | 180 | 100–170 | 90–160 | 0,05–0,20 |
| P3 | 225 | 60–130 | 70–115 | 0,05–0,20 |
| P4 | 250 | 80–150 | 80–160 | 0,05–0,20 |
| P5 | 275 | 75–130 | 80–160 | 0,05–0,15 |
| P6 | 325 | 70–110 | 60–100 | 0,05–0,10 |
| stainless steel | ||||
| M1 | 180 | 100–170 | 120–180 | 0,05–0,10 |
| M2 | 250 | 70–140 | 100–140 | 0,05–0,10 |
| M3 | 330 | 70–120 | 100–120 | 0,05–0,10 |
| cast iron | ||||
| K1 | 180 | 60–130 | 100–120 | 0,02–0,08 |
| K2 | 220 | 60–125 | 80–100 | 0,05–0,15 |
| K3 | 260 | 50–90 | 60–90 | 0,05–0,10 |
| non-ferrous | ||||
| N1 | 60–100 | 100–250 | – | 0,05–0,25 |
| high-temp alloys | ||||
| S1 | 200 | 20–45 | 20–40 | 0,05–0,10 |
| S2 | 250 | 20–30 | 20–30 | 0,02–0,05 |
| S3 | 280 | 15–20 | 15–20 | 0,02–0,05 |
| S4 | 350 | 10–15 | 10–15 | 0,02–0,05 |
| hardened steel | ||||
| H1 | 55 HRC | 20–45 | 20–45 | 0,01–0,03 |
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
