| SAP Material Number | 3745047 |
| ISO Catalog Number | M1D300E1008S100L175 |
| ANSI Catalog Number | M1D300E1008S100L175 |
| [D1] Effective Cutting Diameter | 76.2000 mm |
| [D1] Effective Cutting Diameter | 3.000 in |
| [D] Adapter / Shank / Bore Diameter | 25.4 mm |
| [D] Adapter / Shank / Bore Diameter | 1.0 in |
| [D6] Hub Diameter | 55.6300 mm |
| [D6] Hub Diameter | 2.190 in |
| [L] Overall Length | 44.4500 mm |
| [L] Overall Length | 1.750 in |
| [AP1MAX] 1st Maximum Cutting Depth | 9.8700 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .3886 in |
| Number of Inserts | 8 |
| Maximum Ramping Angle | 0.750 |
| Weight Pounds | 2.08 |
| Max RPM | 22900 |
Face Milling
Helical Milling
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Pocketing
Milling - Side and Face
Milling - Through Coolant| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear resistance |  <="" td=""> | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .E..LD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
| P3–P4 | .E..LD | KCPK30 | .S..GD | KCPK30 | .E..HD | KCPK30 |
| P5–P6 | .E..LD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
| M1–M2 | .E..LD | KCSM40 | .S..GD | KC725M | .E..HD | KCSM40 |
| M3 | .E..LD | KCSM40 | .S..GD | KCPM40 | .E..HD | KCSM40 |
| K1–K2 | .E..LD | KCK15 | .S..GD | KCK15 | .E..HD | KCK15 |
| K3 | .E..LD | KC520M | .S..GD | KC520M | .E..HD | KC520M |
| N1–N2 | .F..LDJ | KC410M | .E..LDJ | KC422M | .E..LD | KC510M |
| N3 | .F..LDJ | KC410M | .F..LDJ | KC410M | .F..LDJ | KC410M |
| S1–S2 | .E..LD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
| S3 | .E..LD | KCSM40 | .S..GE | KCSM40 | .E..HD | KCSM40 |
| S4 | .E..LD | KCSM40 | .S..GE | KCSM40 | .E..HD | KCSM40 |
| H1 | .E..LD | KC510M | – | – | – | – |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LDJ | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,31 | 0,06 | 0,16 | 0,27 | 0,05 | 0,15 | 0,25 | .F..LDJ |
| .F..-PCD | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,31 | 0,06 | 0,16 | 0,27 | 0,05 | 0,15 | 0,25 | .F..-PCD |
| .E..LDJ | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,32 | 0,06 | 0,16 | 0,28 | 0,05 | 0,15 | 0,25 | .E..LDJ |
| .E..LD | 0,12 | 0,35 | 0,57 | 0,09 | 0,25 | 0,41 | 0,07 | 0,19 | 0,31 | 0,06 | 0,17 | 0,27 | 0,05 | 0,15 | 0,25 | .E..LD |
| .S..GE | 0,23 | 0,46 | 0,70 | 0,17 | 0,33 | 0,51 | 0,13 | 0,25 | 0,38 | 0,11 | 0,22 | 0,33 | 0,10 | 0,20 | 0,30 | .S..GE |
| .S..GD | 0,23 | 0,47 | 0,71 | 0,17 | 0,34 | 0,51 | 0,13 | 0,25 | 0,38 | 0,11 | 0,22 | 0,33 | 0,10 | 0,20 | 0,30 | .S..GD |
| .E..HD | 0,23 | 0,51 | 0,82 | 0,17 | 0,37 | 0,59 | 0,13 | 0,28 | 0,44 | 0,11 | 0,24 | 0,38 | 0,10 | 0,22 | 0,35 | .E..HD |
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .F..LDJ | .005 | .014 | .023 | .003 | .010 | .017 | .003 | .008 | .013 | .002 | .007 | .011 | .002 | .006 | .010 | .F..LDJ |
| .F..-PCD | .005 | .014 | .023 | .003 | .010 | .017 | .003 | .008 | .013 | .002 | .007 | .011 | .002 | .006 | .010 | .F..-PCD |
| .E..LDJ | .005 | .014 | .023 | .003 | .010 | .017 | .003 | .008 | .013 | .002 | .007 | .011 | .002 | .006 | .010 | .E..LDJ |
| .E..LD | .005 | .014 | .023 | .004 | .010 | .016 | .003 | .008 | .012 | .002 | .007 | .011 | .002 | .006 | .010 | .E..LD |
| .S..GE | .009 | .018 | .028 | .007 | .013 | .020 | .005 | .010 | .015 | .004 | .009 | .013 | .004 | .008 | .012 | .S..GE |
| .S..GD | .009 | .019 | .028 | .007 | .013 | .020 | .005 | .010 | .015 | .004 | .009 | .013 | .004 | .008 | .012 | .S..GD |
| .E..HD | .009 | .020 | .032 | .007 | .014 | .023 | .005 | .011 | .017 | .004 | .009 | .015 | .004 | .009 | .014 | .E..HD |
| Light Machining | General Purpose | Heavy Machining |
| Material Group | K313 | KC410M | KC422M | KC510M | KC520M | KC522M | KC725M | KCK15 | KCPM20 | KCPK30 | KD1410 | |||||||||||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 330 | 285 | 270 | 260 | 230 | 215 | – | – | – | 550 | 485 | 450 | 455 | 395 | 370 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 275 | 240 | 200 | 220 | 190 | 160 | – | – | – | 340 | 310 | 275 | 280 | 255 | 230 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 255 | 215 | 175 | 200 | 170 | 140 | – | – | – | 310 | 275 | 255 | 255 | 230 | 205 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 245 | 200 | 170 | – | – | – | 225 | 185 | 150 | 180 | 150 | 120 | – | – | – | 230 | 215 | 190 | 190 | 175 | 160 | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 185 | 170 | 150 | 150 | 135 | 120 | – | – | – | 275 | 250 | 230 | 260 | 230 | 210 | – | – | – | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 165 | 125 | 100 | 130 | 100 | 80 | – | – | – | 190 | 170 | 145 | 160 | 135 | – | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 205 | 180 | 165 | 170 | 150 | 135 | – | – | – | 225 | 200 | 175 | 205 | 185 | 155 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 185 | 160 | 130 | 155 | 130 | 110 | – | – | – | 205 | 175 | 160 | 185 | 160 | 140 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 140 | 120 | 95 | 115 | 100 | 80 | – | – | – | 160 | 145 | 125 | 145 | 130 | 115 | – | – | – | |
| K | 1 | 190 | 170 | 150 | – | – | – | – | – | – | 295 | 265 | 240 | 270 | 245 | 215 | 230 | 205 | 185 | – | – | – | 420 | 385 | 340 | 360 | 325 | 295 | 295 | 265 | 240 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 230 | 205 | 190 | 210 | 190 | 175 | 180 | 160 | 150 | – | – | – | 335 | 295 | 275 | 285 | 255 | 235 | 235 | 210 | 190 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 195 | 175 | 160 | 175 | 160 | 145 | 150 | 135 | 120 | – | – | – | 280 | 250 | 230 | 240 | 215 | 200 | 195 | 175 | 160 | – | – | – | |
| N | 1–2 | 795 | 695 | 600 | 1215 | 1080 | 995 | 1075 | 945 | 875 | 640 | 570 | 525 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 2755 | 2450 | 2255 |
| 3 | – | – | – | 1080 | 995 | 915 | 945 | 875 | 760 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 2285 | 1670 | 1355 | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 25 | 35 | 30 | 25 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 25 | 35 | 30 | 25 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 25 | 45 | 35 | 25 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 70 | 50 | 35 | 60 | 45 | 30 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | 160 | 130 | 90 | – | – | – | 120 | 90 | 70 | – | – | – | – | – | – | 140 | 115 | 95 | – | – | – | – | – | – |
| Material Group | K313 | KC410M | KC422M | KC510M | KC520M | KC522M | KC725M | KCK15 | KCPM20 | KCPK30 | KD1410 | |||||||||||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1080 | 940 | 880 | 860 | 750 | 700 | – | – | – | 1810 | 1590 | 1470 | 1485 | 1300 | 1210 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 900 | 790 | 660 | 720 | 630 | 530 | – | – | – | 1120 | 1010 | 910 | 920 | 830 | 750 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 830 | 700 | 580 | 660 | 560 | 460 | – | – | – | 1010 | 910 | 830 | 830 | 750 | 680 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 800 | 650 | 550 | – | – | – | 740 | 610 | 490 | 590 | 490 | 390 | – | – | – | 760 | 700 | 630 | 620 | 575 | 520 | – | – | – | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 610 | 550 | 490 | 490 | 440 | 390 | – | – | – | 910 | 820 | 750 | 850 | 760 | 690 | – | – | – | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 540 | 410 | 330 | 430 | 330 | 260 | – | – | – | 630 | 550 | 475 | 520 | 450 | – | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 670 | 590 | 540 | 560 | 490 | 450 | – | – | – | 730 | 655 | 570 | 680 | 600 | 515 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 610 | 520 | 430 | 510 | 430 | 360 | – | – | – | 670 | 580 | 520 | 610 | 530 | 460 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 460 | 400 | 310 | 380 | 330 | 260 | – | – | – | 530 | 475 | 410 | 475 | 430 | 380 | – | – | – | |
| K | 1 | 620 | 550 | 490 | – | – | – | – | – | – | 960 | 870 | 780 | 880 | 800 | 710 | 750 | 680 | 600 | – | – | – | 1380 | 1255 | 1115 | 1180 | 1070 | 960 | 965 | 875 | 780 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 760 | 680 | 630 | 690 | 620 | 580 | 590 | 530 | 490 | – | – | – | 1095 | 975 | 910 | 940 | 840 | 770 | 770 | 690 | 630 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 640 | 570 | 520 | 580 | 520 | 470 | 490 | 440 | 400 | – | – | – | 920 | 815 | 750 | 790 | 700 | 650 | 645 | 575 | 530 | – | – | – | |
| N | 1–2 | 2610 | 2280 | 1960 | 3990 | 3550 | 3270 | 3520 | 3100 | 2870 | 2100 | 1870 | 1720 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 9030 | 8040 | 7400 |
| 3 | – | – | – | 3550 | 3270 | 3000 | 3100 | 2870 | 2500 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 7490 | 5470 | 4440 | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 130 | 120 | 90 | 115 | 100 | 80 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 130 | 120 | 90 | 115 | 100 | 80 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 170 | 130 | 90 | 150 | 115 | 80 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 230 | 170 | 120 | 200 | 150 | 100 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | 525 | 425 | 300 | – | – | – | 390 | 300 | 230 | – | – | – | – | – | – | 460 | 380 | 310 | – | – | – | – | – | – |
| insert style | cutting diameter | max ramp angle to non-cutting corner tangent | max ramp angle to steel body interference | DH min (min hole diameter) | DHI min (min flat-bottomed hole diameter) | max diameter (no flat bottom) |
| Mill-1, 10mm | 12 | not recommended | not recommended | not recommended | not recommended | not recommended |
| Mill-1, 10mm | 16 | 9,7° | 12,3° | 19,50 | 28,73 | 32 |
| Mill-1, 10mm | 18 | 7,6° | 9,6° | 23,29 | 32,68 | 63 |
| Mill-1, 10mm | 20 | 6,2° | 8,6° | 27,25 | 36,63 | 40 |
| Mill-1, 10mm | 22 | 5,2° | 7,0° | 31,25 | 40,63 | 44 |
| Mill-1, 10mm | 25 | 4,2° | 5,3° | 37,26 | 46,62 | 50 |
| Mill-1, 10mm | 28 | 3,5° | 4,3° | 43,26 | 52,62 | 56 |
| Mill-1, 10mm | 32 | 2,8° | 3,3° | 51,27 | 60,62 | 64 |
| Mill-1, 10mm | 40 | 2,0° | 2,3° | 67,30 | 76,61 | 80 |
| Mill-1, 10mm | 42 | 1,9° | 2,1° | 71,32 | 80,60 | 82 |
| Mill-1, 10mm | 50 | 1,5° | 1,6° | 87,53 | 96,86 | 100 |
| Mill-1, 10mm | 63 | 1,2° | 1,2° | 113,54 | 122,86 | 126 |
| Mill-1, 10mm | 80 | 0,9° | 0,9° | 147,54 | 156,85 | 160 |
| Mill-1, 10mm | 100 | 0,7° | 0,7° | 187,54 | 196,85 | 200 |
| insert style | cutting diameter | max ramp angle to non-cutting corner tangent | max ramp angle to steel body interference | DH min (min hole diameter) | DHI min (min flat-bottomed hole diameter) | max diameter (no flat bottom) |
| Mill-1, 10mm | .500 | not recommended | not recommended | not recommended | not recommended | not recommended |
| Mill-1, 10mm | .625 | 9.9° | 12.5° | .758 | 1.121 | 1.250 |
| Mill-1, 10mm | .750 | 6.8° | 9.7° | .998 | 1.367 | 1.500 |
| Mill-1, 10mm | .875 | 5.1° | 6.8° | 1.248 | 1.617 | 1.750 |
| Mill-1, 10mm | 1.000 | 4.1° | 5.1° | 1.498 | 1.867 | 2.000 |
| Mill-1, 10mm | 1.100 | 3.5° | 4.3° | 1.698 | 2.067 | 2.200 |
| Mill-1, 10mm | 1.250 | 2.9° | 3.4° | 1.999 | 2.367 | 2.500 |
| Mill-1, 10mm | 1.500 | 2.2° | 2.4° | 2.499 | 2.867 | 3.000 |
| Mill-1, 10mm | 2.000 | 1.2° | 1.6° | 3.509 | 3.876 | 4.000 |
| Mill-1, 10mm | 2.500 | 1.2° | 1.2° | 4.509 | 4.876 | 5.000 |
| Mill-1, 10mm | 3.000 | 0.9° | 1.0° | 5.509 | 5.876 | 6.000 |
| Mill-1, 10mm | 4.000 | 0.7° | 0.7° | 7.509 | 7.876 | 8.000 |
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
