Negative Inserts • CNMG-FP

Grades

• 
  KC5010

  Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
  Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• KC8050

  composition: A newly developed, advanced cobalt-enriched carbide
  grade with a thick alumina coating.
  application: A versatile performer on a wide range of workpiece
  materials (steels, stainless steels, and cast irons) for roughing through
  finishing operations. This highly wear-resistant grade can operate with
  or without coolant at high speeds, and has exceptional edge strength
  for interrupted cuts. The micro-finished insert edge resists workpiece
  build-up and microchipping, and produces excellent surface finishes.
  For machining steels and cast irons, your first choices are the -RN and
  -MN geometries. For medium machining applications and finishing
  cuts, the -MP and -FP geometries with a positive rake are suggested.
  

• KC9225

  MT-CVD-TiN-TiCN-Al2O3-TiN gradient carbide
  For continuous to slightly interrupted cuts
  For universal use in boring on stainless steels
  Reduced edge build up due to micro-polished surface
  

• 
  KCM15

  Composition: Nanostructured PVD TiAlN coated fine-grain carbide with a golden TiN top layer for better wear identification and superior surface finish.
  Application: A state-of-the-art surface condition enhances low adhesion potential to stainless steel materials and offers superior chip evacuation even in low-pressure coolant applications. Applicable for stainless steel and high-temperature resistant materials.

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• 
  KCM15B

  Composition: A multilayer MTCVD-TiCN-Al2O3 coated carbide grade.

  Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20-25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• 
  KCP10

  Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
  Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

  P Steel

  K Cast Iron
• 
  KCP10B

  Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

  Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

  P Steel

  K Cast Iron
• 
  KCP25

  Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
  Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

  P Steel

  K Cast Iron
• 
  KCP25B

  Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

  Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

  P Steel

  K Cast Iron
• 
  KCS10B

  Composition: PVD-AlTiN coating with a very smooth coating surface and extremely hard, wear-resistant ultra fine-grain carbide substrate.
  Application: The KCS10B™ grade is ideal for medium machining and finishing operations of Nickel-Based, Cobalt-Based, and Iron-Based High-Temperature Alloys. The extremely hard, wear-resistant carbide substrate allows for longer tool life while the ultra fine-grain carbide substrate and smoother coating reduces friction.

  S High-Temp Alloys

  M Stainless Steel
• 
  KCU10

  Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
  
  Application: The KCU10™ grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

  P Steel

  S High-Temp Alloys

  M Stainless Steel
• 
  KT315

  Composition: A multilayer PVD-TiN/TiCN/TiN-coated cermet turning grade.
  Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

  P Steel

  K Cast Iron

  M Stainless Steel
• KU10T