| SAP Material Number | 3577137 |
| ISO Catalog Number | KTMS50S32SD12H |
| ANSI Catalog Number | KTMS50S32SD12H |
| [D1] Effective Cutting Diameter | 50.0000 mm |
| [D1] Effective Cutting Diameter | 1.968 in |
| [D] Adapter / Shank / Bore Diameter | 32.0 mm |
| [D] Adapter / Shank / Bore Diameter | 1.259 in |
| [D3] Neck Diameter | 26.5000 mm |
| [D3] Neck Diameter | 1.043 in |
| [L] Overall Length | 140.0000 mm |
| [L] Overall Length | 5.511 in |
| [L1] Gage Length | 140.0000 mm |
| [L1] Gage Length | 5.511 in |
| [L3] Usable Length | 60.0000 mm |
| [L3] Usable Length | 2.362 in |
| [AP1MAX] 1st Maximum Cutting Depth | 22.0000 mm |
| [AP1MAX] 1st Maximum Cutting Depth | .8661 in |
| Number of Inserts | 4 |
| [Z] Number of Flutes | 2 |
| Gage Insert | SDMT120408EGG |
| Weight Pounds | 1.87 |
Slotting: Side
Slotting: Side with AE/AP dimensions
Slotting: T
Slotting: T with AP dimension
Shank - Cylindrical Weldon| Material Group | Light Machining | General Purpose | Heavy Machining | |||
| – | (Light geometry) | – | (Strong geometry) | |||
| – | wear resistance |  <="" td=""> | toughness | |||
| – | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | ..EGG | KC735M | ..EGG | KC735M | ..EGG | KC735M |
| P3–P4 | ..EGG | KC735M | ..EGG | KC735M | ..EGG | KC735M |
| P5–P6 | ..EGG | KC735M | ..EGG | KC735M | ..EGG | KC735M |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | ..EGG | KC505M | ..EGG | KC505M | ..EGG | KC505M |
| K3 | ..EGG | KC505M | ..EGG | KC505M | ..EGG | KC505M |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | – | – | – | – | – | – |
| H1 | – | – | – | – | – | – |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .06..EGG | 0,20 | 0,46 | 0,70 | 0,14 | 0,33 | 0,50 | 0,11 | 0,25 | 0,38 | 0,09 | 0,22 | 0,33 | 0,08 | 0,20 | 0,30 | .06..EGG |
| .08..EGG | 0,20 | 0,53 | 0,82 | 0,14 | 0,38 | 0,59 | 0,11 | 0,29 | 0,44 | 0,09 | 0,25 | 0,39 | 0,08 | 0,23 | 0,35 | .08..EGG |
| .12..EGG | 0,20 | 0,59 | 0,92 | 0,14 | 0,43 | 0,66 | 0,11 | 0,32 | 0,50 | 0,09 | 0,28 | 0,43 | 0,08 | 0,25 | 0,40 | .12..EGG |
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .06..EGG | 0.20 | 0.46 | 0.70 | 0.14 | 0.33 | 0.50 | 0.11 | 0.25 | 0.38 | 0.09 | 0.22 | 0.33 | 0.08 | 0.20 | 0.30 | .06..EGG |
| .08..EGG | 0.20 | 0.53 | 0.82 | 0.14 | 0.38 | 0.59 | 0.11 | 0.29 | 0.44 | 0.09 | 0.25 | 0.39 | 0.08 | 0.23 | 0.35 | .08..EGG |
| .12..EGG | 0.20 | 0.59 | 0.92 | 0.14 | 0.43 | 0.66 | 0.11 | 0.32 | 0.50 | 0.09 | 0.28 | 0.43 | 0.08 | 0.25 | 0.40 | .12..EGG |
| Light Machining | General Purpose | Heavy Machining |
| material type | catalog number | cutting conditions vc (m/min) | n (RPM) | feed per tooth (mm) | |
| P | carbon steel/ alloy steel | KTMS21S25SD06H | 120 | 1820 | 0,10 |
| KTMS25S25SD06H | 120 | 1530 | 0,10 | ||
| KTMS32S32SD08H | 120 | 1190 | 0,10 | ||
| KTMS40S32SD12H | 120 | 960 | 0,10 | ||
| KTMS50S32SD12H | 120 | 760 | 0,10 | ||
| K | cast iron | KTMS21S25SD06H | 150 | 2270 | 0,12 |
| KTMS25S25SD06H | 150 | 1910 | 0,12 | ||
| KTMS32S32SD08H | 150 | 1490 | 0,12 | ||
| KTMS40S32SD12H | 150 | 1190 | 0,15 | ||
| KTMS50S32SD12H | 150 | 960 | 0,15 |
| material type | catalog number | cutting conditions vc (m/min) | feed per tooth (mm) | Vs* | |
| P | carbon steel/ alloy steel | KTMS21S25SD06H | 120 | 0,10 | Figure 1 |
| KTMS25S25SD06H | 120 | 0,10 | Figure 1 | ||
| KTMS32S32SD08H | 100 | 0,10 | Figure 1 | ||
| KTMS40S32SD12H | 80 | 0,15 | Figure 2 | ||
| KTMS50S32SD12H | not recommended due to frequent chattering | ||||
| K | cast iron | KTMS21S25SD06H | 120 | 0,12 | Figure 1, 2, 3 |
| KTMS25S25SD06H | 120 | 0,12 | Figure 1, 2, 3 | ||
| KTMS32S32SD08H | 120 | 0,12 | Figure 1, 2, 3 | ||
| KTMS40S32SD12H | 120 | 0,15 | Figure 2,3 | ||
| KTMS50S32SD12H | 120 | 0,15 | Figure 3 | ||
| Material Group | KC110M | KC505M | KC730M | KC735M | |||||||||
| P | 1 | – | – | – | – | – | – | 130 | 120 | 100 | 160 | 140 | 130 |
| 2 | – | – | – | – | – | – | 120 | 110 | 105 | 140 | 130 | 120 | |
| 3 | – | – | – | – | – | – | 110 | 100 | 90 | 130 | 120 | 110 | |
| 4 | – | – | – | – | – | – | 100 | 90 | 80 | 120 | 110 | 100 | |
| 5 | – | – | – | – | – | – | 90 | 80 | 75 | 110 | 90 | 80 | |
| 6 | – | – | – | – | – | – | 80 | 75 | 70 | 90 | 80 | 70 | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 130 | 120 | 115 | 150 | 140 | 120 | – | – | – | – | – | – |
| 2 | 115 | 105 | 100 | 140 | 120 | 105 | – | – | – | – | – | – | |
| 3 | 100 | 90 | 80 | 105 | 95 | 80 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| Material Group | KC110M | KC505M | KC730M | KC735M | |||||||||
| P | 1 | – | – | – | – | – | – | 420 | 400 | 330 | 490 | 460 | 430 |
| 2 | – | – | – | – | – | – | 400 | 360 | 340 | 460 | 430 | 390 | |
| 3 | – | – | – | – | – | – | 360 | 330 | 300 | 430 | 390 | 360 | |
| 4 | – | – | – | – | – | – | 330 | 300 | 270 | 390 | 360 | 330 | |
| 5 | – | – | – | – | – | – | 300 | 270 | 250 | 360 | 290 | 260 | |
| 6 | – | – | – | – | – | – | 270 | 250 | 235 | 290 | 260 | 230 | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 425 | 400 | 375 | 490 | 460 | 390 | – | – | – | – | – | – |
| 2 | 375 | 350 | 325 | 460 | 390 | 340 | – | – | – | – | – | – | |
| 3 | 330 | 295 | 260 | 340 | 310 | 260 | – | – | – | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
ISO Catalog Number
ANSI Catalog Number
to find similar products.Please select a file to download
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Catalog Number | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
