Attachment Guidelines

These are general guidelines on how to apply KenCast to your equipment. However, weld applications may vary substantially, depending on the material to which KenCast is applied. Consult a local welding representative or contact your Kennametal Representative for recommendations on your particular application.

Weld Material

  .052" (13,2mm) wire (flux cored)
  • 7100 ESAB or equivalent, shielded with carbon dioxide
  • 22–24 volts and 200–235 amps
  1/8" (3,1mm) weld rod
  • 7018M or equivalent, low hydrogen
  • 21–33 volts/135–185 amps

These specifications are for welding to low- to medium-carbon steels.

When welding to specialty steels, such as stainless and manganese, contact your Kennametal Representative for welding recommendations. 

Welding Instructions

KenCast parts must be welded properly to achieve optimum performance:

  • Always attach castings with the steel side against the surface to be protected.
  • The carbide surface side, painted black to identify the wear side, faces outward.
  • Welding the carbide surface can cause cracking and is detrimental to carbide particles.

Cutting Instructions

Option #1

  • Score the steel side with an angle grinder or chop saw with corundum wheel, then strike with a hammer.

Option #2

  • Plasma or waterjet.
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?