Para los clientes de EE. UU. y Canadá, se agregará un recargo arancelario a su pedido de herramientas de corte.
Ángulo de ataque y selección de apoyo
Calcule el ángulo de ataque y la selección de apoyos para el sistema de roscado LT.
These calculations are based upon theoretical values and are only intended for planning purposes. Actual results will vary. No responsibility from Kennametal is assumed.
Selection of SHIMs |
|
|---|
feed direction towards the chuck (standard helix )
To determine catalog number replace (*) asterisk with the number 3 or 4. (3 = 3/8 I.C. or 4 = 1/2 I.C.)
0° to 1° = SMYI*1N1° to 2° = SMYI*2° to 3° = SMYI*1P3° to 4° = SMYI*2P | 0° to 1° = SMYE*1N1° to 2° = SMYE*2° to 3° = SMYE*1P3° to 4° = SMYE*2P | 0° to 1° = SMYE*1N1° to 2° = SMYE*2° to 3° = SMYE*1P3° to 4° = SMYE*2P | 0° to 1° = SMYI*1N1° to 2° = SMYI*2° to 3° = SMYI*1P3° to 4° = SMYI*2P |
|---|---|---|---|
 |  |  |  |
0° to -1° = SMYI*2N-1° to 2° = SMYI*3N | 0° to -1° = SMYE*2N-1° to 2° = SMYE*3N | 0° to -1° = SMYE*2N-1° to 2° = SMYE*3N | 0° to -1° = SMYI*2N-1° to 2° = SMYI*3N |
|---|---|---|---|
 |  |  |  |