欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

快速订购
项目 已成功添加到购物车
查看购物车

TOP NOTCH™ 仿形

选择筛选器
筛选器
筛选器
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (309)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (309)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (309)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (309)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (309)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (309)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (309)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (309)
  • M 不锈钢 (277)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (277)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (277)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (277)
  • K 铸铁 (266)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (266)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (266)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (266)
  • N 非铁金属材料 (298)
    • N1
      铝型材 (284)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (251)
    • N3
      高硅铝合金 硅 > 12.2% (101)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (298)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (265)
    • N6
      碳、石墨复合材料、CFRP (251)
  • S 高温合金 (303)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (303)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (303)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (303)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (303)
  • H 淬火材料 (207)
    • H1
      淬火材料 44-48 HRC (207)
    • H2
      淬火材料 48-55 HRC (178)
应用
应用
  • Face Grooving Face Grooving (63)
  • Facing Facing (6)
  • ID Facing ID Facing (6)
  • Multiple Direction Cutting Multiple Direction Cutting (100)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (6)
  • Turning Turning (6)
刀具切削刃角度
刀具切削刃角度
  • 62.5 (2)
  • 72.5 (2)
  • 93.0 (1)
  • 95.0 (77)
  • 100.0 (1)
  • 107.5 (9)
  • 117.5 (8)
刀具切削刃角度 Min 到 刀具切削刃角度 Max
连接类型
连接类型
  • Bolt-On Head (2)
  • Boring Bar Shank (42)
  • Toolholder (56)
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 0.75 in (2)
  • 3.15 in (1)
  • 3.5 in (2)
  • 3.938 in (2)
  • 4.0 in (2)
  • 4.5 in (10)
  • 4.921 in (10)
  • 5.0 in (4)
  • 5.906 in (15)
  • 6.0 in (12)
  • 6.694 in (2)
  • 7.087 in (2)
  • 7.263 in (2)
  • 7.875 in (2)
  • 8.0 in (2)
  • 8.055 in (1)
  • 8.132 in (2)
  • 8.15 in (1)
  • 9.843 in (4)
  • 10.0 in (7)
  • 10.063 in (2)
  • 10.095 in (2)
  • 11.811 in (2)
  • 12.0 in (5)
  • 13.781 in (1)
  • 14.0 in (2)
  • 14.07 in (1)
总长 [L] Min 到 总长 [L] Max
总长 [L]
总长 [L]
  • 19.05 mm (2)
  • 80.0 mm (1)
  • 88.9 mm (2)
  • 100.0 mm (2)
  • 101.601 mm (2)
  • 114.301 mm (10)
  • 125.0 mm (10)
  • 127.0 mm (4)
  • 150.0 mm (15)
  • 152.4 mm (12)
  • 170.0 mm (2)
  • 180.0 mm (2)
  • 184.451 mm (2)
  • 200.0 mm (2)
  • 203.201 mm (2)
  • 204.601 mm (1)
  • 206.55 mm (2)
  • 207.0 mm (1)
  • 250.0 mm (4)
  • 254.0 mm (7)
  • 255.601 mm (2)
  • 256.401 mm (2)
  • 300.0 mm (2)
  • 304.8 mm (5)
  • 350.0 mm (1)
  • 355.6 mm (2)
  • 357.375 mm (1)
总长 [L] Min 到 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.005 in (81)
  • 0.008 in (128)
  • 0.016 in (221)
  • 0.02 in (88)
  • 0.031 in (204)
  • 0.039 in (68)
  • 0.047 in (46)
  • 0.063 in (34)
刀尖半径 Min 到 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.125 mm (81)
  • 0.2 mm (128)
  • 0.4 mm (221)
  • 0.5 mm (88)
  • 0.8 mm (204)
  • 1.0 mm (68)
  • 1.201 mm (46)
  • 1.6 mm (34)
刀尖半径 Min 到 刀尖半径 Max
刀尖倒角
刀尖倒角
  • 0.0 mm (337)
刀尖倒角 Min 到 刀尖倒角 Max
刀尖倒角
刀尖倒角
  • 0.0 in (337)
刀尖倒角 Min 到 刀尖倒角 Max
application
切削刀具材质
切削刀具材质
  • K00326 (29)
  • K313 (105)
  • K420 (60)
  • K6 (4)
  • K68 (116)
  • K8735 (29)
  • KB1345 (25)
  • KC250 (82)
  • KC5010 (129)
  • KC5025 (113)
  • KC5410 (91)
  • KC720 (29)
  • KC730 (113)
  • KC7310 (87)
  • KC732 (94)
  • KC8050 (100)
  • KC810 (100)
  • KC850 (119)
  • KC9025 (94)
  • KC910 (89)
  • KC9105 (62)
  • KC9110 (100)
  • KC9120 (34)
  • KC9125 (100)
  • KC9225 (100)
  • KC9315 (89)
  • KC935 (94)
  • KC950 (94)
  • KCD25 (29)
  • KCK05 (37)
  • KCK15B (31)
  • KCM15B (59)
  • KCM25 (100)
  • KCM25B (5)
  • KCP05 (93)
  • KCP10 (106)
  • KCP10B (89)
  • KCP25 (106)
  • KCP25B (95)
  • KCP25C (132)
  • KCS10B (33)
  • KCU10 (134)
  • KCU10B (144)
  • KCU25 (127)
  • KCU25B (95)
  • KD050 (82)
  • KD081 (29)
  • KD100 (94)
  • KD120 (86)
  • KD1425 (101)
  • KS15 (29)
  • KT125 (82)
  • KT150 (87)
  • KT175 (53)
  • KT315 (111)
刀具手式
刀具手式
  • L (41)
  • N (4)
  • R (55)
F 尺寸
F 尺寸
  • 8.875 mm (2)
  • 9.0 mm (2)
  • 9.4 mm (2)
  • 9.525 mm (4)
  • 10.875 mm (1)
  • 11.0 mm (2)
  • 12.5 mm (1)
  • 12.576 mm (4)
  • 12.625 mm (1)
  • 12.701 mm (3)
  • 13.0 mm (2)
  • 14.275 mm (6)
  • 15.875 mm (2)
  • 16.0 mm (3)
  • 17.0 mm (1)
  • 18.925 mm (2)
  • 19.05 mm (7)
  • 19.425 mm (1)
  • 20.0 mm (2)
  • 22.0 mm (4)
  • 25.0 mm (8)
  • 25.401 mm (8)
  • 27.0 mm (1)
  • 28.451 mm (1)
  • 28.576 mm (2)
  • 31.75 mm (9)
  • 32.0 mm (14)
  • 35.0 mm (1)
  • 38.1 mm (2)
  • 50.801 mm (2)
F 尺寸 Min 到 F 尺寸 Max
F 尺寸
F 尺寸
  • 0.35 in (2)
  • 0.354 in (2)
  • 0.37 in (2)
  • 0.375 in (4)
  • 0.428 in (1)
  • 0.433 in (2)
  • 0.492 in (1)
  • 0.495 in (4)
  • 0.497 in (1)
  • 0.5 in (3)
  • 0.512 in (2)
  • 0.562 in (6)
  • 0.625 in (2)
  • 0.63 in (3)
  • 0.669 in (1)
  • 0.745 in (2)
  • 0.75 in (7)
  • 0.765 in (1)
  • 0.787 in (2)
  • 0.866 in (4)
  • 0.984 in (8)
  • 1.0 in (8)
  • 1.063 in (1)
  • 1.12 in (1)
  • 1.125 in (2)
  • 1.25 in (9)
  • 1.26 in (14)
  • 1.379 in (1)
  • 1.5 in (2)
  • 2.0 in (2)
F 尺寸 Min 到 F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 16.0 mm (4)
  • 16.776 mm (2)
  • 17.026 mm (2)
  • 19.05 mm (1)
  • 20.0 mm (3)
  • 22.85 mm (4)
  • 24.901 mm (6)
  • 25.0 mm (2)
  • 26.925 mm (1)
  • 32.0 mm (3)
  • 33.025 mm (5)
  • 40.0 mm (4)
  • 45.051 mm (1)
  • 46.475 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (2)
  • 53.85 mm (1)
  • 63.0 mm (1)
最小轴向凹槽直径 Min 到 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.63 in (4)
  • 0.66 in (2)
  • 0.67 in (2)
  • 0.75 in (1)
  • 0.787 in (3)
  • 0.9 in (4)
  • 0.98 in (6)
  • 0.984 in (2)
  • 1.06 in (1)
  • 1.26 in (3)
  • 1.3 in (5)
  • 1.575 in (4)
  • 1.774 in (1)
  • 1.83 in (1)
  • 1.969 in (1)
  • 2.0 in (2)
  • 2.12 in (1)
  • 2.48 in (1)
最小轴向凹槽直径 Min 到 最小轴向凹槽直径 Max
切削方向
切削方向
  • B (73)
  • E (17)
  • P (4)
  • S (6)
前角样式
前角样式
  • DOUBLE NEGATIVE (7)
  • DOUBLE POSITIVE (5)
  • NEGATIVE-ZERO (42)
  • NEUTRAL (ZERO) (46)
最大镗孔深度
最大镗孔深度
  • 1.891 in (2)
  • 2.0 in (2)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.835 in (2)
  • 3.0 in (8)
  • 3.15 in (2)
  • 3.75 in (2)
  • 3.781 in (1)
  • 3.938 in (3)
  • 4.0 in (5)
  • 4.5 in (2)
  • 4.992 in (1)
  • 5.0 in (1)
  • 5.039 in (4)
  • 6.0 in (3)
  • 6.299 in (1)
  • 7.875 in (1)
最大镗孔深度 Min 到 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 48.0 mm (2)
  • 50.801 mm (2)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 72.0 mm (2)
  • 76.2 mm (8)
  • 80.0 mm (2)
  • 95.25 mm (2)
  • 96.0 mm (1)
  • 100.0 mm (3)
  • 101.601 mm (5)
  • 114.301 mm (2)
  • 126.801 mm (1)
  • 127.0 mm (1)
  • 128.0 mm (4)
  • 152.4 mm (3)
  • 160.0 mm (1)
  • 200.0 mm (1)
最大镗孔深度 Min 到 最大镗孔深度 Max
镗杆材料
镗杆材料
  • C (10)
  • S (34)
frontEnd
夹具样式
夹具样式
  • N (100)
刀片形状
刀片形状
  • D-DIAMOND/RHOMBIC 55 (27)
  • K-PARALLELOGRAM 55 (12)
  • N/K-PARALLELOGRAM 55 (248)
  • V-DIAMOND/RHOMBIC 35 (150)
最大切削深度
最大切削深度
  • 0.116 in (2)
  • 0.121 in (1)
  • 0.185 in (1)
  • 0.244 in (1)
最大切削深度 Min 到 最大切削深度 Max
最大切削深度
最大切削深度
  • 2.95 mm (2)
  • 3.075 mm (1)
  • 4.7 mm (1)
  • 6.2 mm (1)
最大切削深度 Min 到 最大切削深度 Max
insertGeometry
形状
形状
  • D-DIAMOND/RHOMBIC 55 (22)
  • K-PARALLELOGRAM 55 (8)
  • N/K-PARALLELOGRAM 55 (192)
  • V-DIAMOND/RHOMBIC 35 (115)
刀片 IC 尺寸
刀片 IC 尺寸
  • 4.75 mm (2)
  • 6.351 mm (11)
  • 9.525 mm (104)
  • 12.701 mm (22)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
刀片 IC 尺寸
刀片 IC 尺寸
  • 0.187 in (2)
  • 0.25 in (11)
  • 0.375 in (104)
  • 0.5 in (22)
刀片 IC 尺寸 Min 到 刀片 IC 尺寸 Max
切削刃长度
切削刃长度
  • 11.05 mm (1)
  • 11.076 mm (10)
  • 11.601 mm (120)
  • 11.625 mm (6)
  • 15.451 mm (44)
  • 15.5 mm (22)
  • 16.6 mm (104)
  • 17.5 mm (8)
  • 22.725 mm (5)
切削刃长度 Min 到 切削刃长度 Max
切削刃长度
切削刃长度
  • 0.435 in (1)
  • 0.436 in (10)
  • 0.457 in (120)
  • 0.458 in (6)
  • 0.608 in (44)
  • 0.61 in (22)
  • 0.654 in (104)
  • 0.69 in (8)
  • 0.895 in (5)
切削刃长度 Min 到 切削刃长度 Max
断屑槽 CBMD
断屑槽 CBMD
  • 08 (36)
  • 1 (6)
  • 15 (96)
  • 2 (2)
  • 20 (31)
  • 25 (12)
  • 32 (2)
  • FP (63)
  • HP (2)
切削刀具材料
切削刀具材料
  • B H (86)
  • B L (82)
  • D P (108)
  • H T (111)
  • H W (412)
公差等级
公差等级
  • G (254)
  • M (40)
  • U (43)
backEnd
连接类型
连接类型
  • BORING BAR (42)
  • BORING BAR HEAD (2)
  • SQUARE SHANK (56)
后端直径
后端直径
  • 12.0 mm (4)
  • 12.701 mm (5)
  • 15.875 mm (4)
  • 16.0 mm (3)
  • 19.05 mm (7)
  • 20.0 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (5)
  • 31.701 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (4)
  • 38.1 mm (3)
  • 40.0 mm (1)
  • 50.0 mm (1)
后端直径 Min 到 后端直径 Max
后端直径
后端直径
  • 0.473 in (4)
  • 0.5 in (5)
  • 0.625 in (4)
  • 0.63 in (3)
  • 0.75 in (7)
  • 0.787 in (2)
  • 0.984 in (3)
  • 1.0 in (5)
  • 1.248 in (1)
  • 1.25 in (1)
  • 1.26 in (4)
  • 1.5 in (3)
  • 1.575 in (1)
  • 1.969 in (1)
后端直径 Min 到 后端直径 Max
刀柄高度
刀柄高度
  • 0.449 in (2)
  • 0.473 in (1)
  • 0.5 in (4)
  • 0.606 in (1)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (9)
  • 0.787 in (10)
  • 0.939 in (3)
  • 0.984 in (11)
  • 1.0 in (10)
  • 1.214 in (4)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.53 in (1)
  • 1.848 in (1)
刀柄高度 Min 到 刀柄高度 Max
刀柄高度
刀柄高度
  • 11.4 mm (2)
  • 12.0 mm (1)
  • 12.701 mm (4)
  • 15.4 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (9)
  • 20.0 mm (10)
  • 23.826 mm (3)
  • 25.0 mm (11)
  • 25.401 mm (10)
  • 30.826 mm (4)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 38.825 mm (1)
  • 46.95 mm (1)
刀柄高度 Min 到 刀柄高度 Max
刀柄宽度
刀柄宽度
  • 0.473 in (1)
  • 0.5 in (4)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (9)
  • 0.787 in (10)
  • 0.864 in (3)
  • 0.984 in (13)
  • 1.0 in (10)
  • 1.141 in (4)
  • 1.25 in (2)
  • 1.455 in (1)
  • 1.5 in (2)
  • 1.848 in (1)
刀柄宽度 Min 到 刀柄宽度 Max
刀柄宽度
刀柄宽度
  • 12.0 mm (1)
  • 12.701 mm (4)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (9)
  • 20.0 mm (10)
  • 21.951 mm (3)
  • 25.0 mm (13)
  • 25.401 mm (10)
  • 28.951 mm (4)
  • 31.75 mm (2)
  • 36.95 mm (1)
  • 38.1 mm (2)
  • 46.95 mm (1)
刀柄宽度 Min 到 刀柄宽度 Max
No filters matching ""

刀片

(337) 刀片

刀柄

(56) 刀柄

镗杆

(42) 镗杆

镗头

(2) 镗头
您即将把 添加至“我的解决方案”页面. 是否要继续？
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

您已注册成功，现在就可以登录并使用网站了。

You are about to leave the Solution building process.

Are you sure you want to leave?