Benvenuto
Conferma le tue preferenze
Aggiorna preferenze

Suggerimenti sui prodotti

Product Family suggestions

Kennametal al tuo servizio

Servizio clienti

Trova i contatti dei centri assistenza clienti in tutto il mondo

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Articolo/i aggiunto correttamente al carrello
Visualizza carrello
Articolo/i are being added to the cart
Visualizza carrello
Non ti perdere queste offerte speciali prima che sia troppo tardi! Acquista ora

Kennametal al tuo servizio

Servizio clienti

Trova i contatti dei centri assistenza clienti in tutto il mondo

Articolo/i aggiunto correttamente al carrello
Visualizza carrello
Articolo/i are being added to the cart
Visualizza carrello
Exit Search Torna alla soluzione

Modifica della soluzione

Soluzione aggiunta

Nome della soluzione:{{SolutionName}}

    Prodotto simile a :

    Torna a | Modifcia simile a

    DFR codolo (WD) Whistle Notch • 3 x D

    Corpi punta Drill Fix™ DFR™

    Material Number100002273

    DFR codolo (WD) Whistle Notch • 3 x D
    DFR codolo (WD) Whistle Notch • 3 x D
    DFR codolo (WD) Whistle Notch • 3 x D
    Open expanded view
    DFR codolo (WD) Whistle Notch • 3 x D
    DFR codolo (WD) Whistle Notch • 3 x D
    Rappresentazione generica
    Contatta il nostro team di vendita per scoprire tutti i prezzi a voi riservati

    Features and benefits

    • Drill Fix DFR with rectangular-shaped inserts offer high stability and feed rates at smaller sizes
    • X-offset design allows for diameter size adjustment on turning machines and optimizes tolerances on machining centers
    • Drill shipped with insert screws and Torx wrench
    • ForaturaForatura
    • Foratura: Ingresso inclinatoForatura: Ingresso inclinato
    • Foratura: Uscita inclinataForatura: Uscita inclinata
    • Foratura: Offset sull'asse xForatura: Offset sull'asse x
    • Foratura: ConvessaForatura: Convessa
    • Codolo — Cilindrico Whistle Notch con invito e flangiaCodolo — Cilindrico Whistle Notch con invito e flangia
    • Adduzione interna di refrigerante: Radiale: Foratura intercambiabileAdduzione interna di refrigerante: Radiale: Foratura intercambiabile
    • Foratura: Foro ciecoForatura: Foro cieco
    • Chain DrillingChain Drilling
    • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
    • Drilling: Half-Cylindrical DrillingDrilling: Half-Cylindrical Drilling
    • Drilling: Corner Drilling 45°Drilling: Corner Drilling 45°

    ATTENZIONE • Drill Fix DFR

    ATTENZIONE: Durante le operazioni di foratura passante, viene prodotto un dischetto quando l'utensile oltrepassa il pezzo. Quando la punta è ferma e il pezzo è in rotazione, un dischetto può essere espulso dal mandrino per effetto della forza centrifuga. Adottare le adeguate misure di sicurezza.

    Dimensions • Codolo (WD) DFR Whistle Notch

    DLS
    2045
    2545
    3258
    Metrico
    Gruppo materialiCondizioneSedeGeometriaQualitàVelocità di taglio vcVelocità di avanzamento consigliata (f) rispetto al diametro
    Intervallo m/min
    MinValore inizialeMaxØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360mm/giro0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230mm/giro0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150mm/giro0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    2SOMDKC7140150180210mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC714080110140mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    Metrico
    Velocità di taglio vc
    Intervallo m/minVelocità di avanzamento consigliata (f) rispetto al diametro
    Gruppo materialiCondizioneSedeGeometriaQualitàMinValore inizialeMaxØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    P1SOMDKCU25310325360mm/r0,09–0,150,11–0,180,15–0,25
    1SIMDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    1UOMDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    1UIMDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    1IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    1IIMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2SOGDKCPK10310325360mm/r0,09–0,150,11–0,180,15–0,25
    2SILDKC7140310325360mm/r0,09–0,150,11–0,180,15–0,25
    2UOGDKCU40200215230mm/r0,09–0,150,11–0,180,15–0,25
    2UILDKC7140200215230mm/r0,09–0,150,11–0,180,15–0,25
    2IOMDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    2IILDKC7140130135150mm/r0,09–0,150,11–0,180,15–0,25
    3SOGDKCPK10260285320mm/r0,09–0,150,11–0,180,15–0,25
    3SILDKC7140260285320mm/r0,09–0,150,11–0,180,15–0,25
    3UOGDKCU40180195220mm/r0,09–0,150,11–0,180,15–0,25
    3UILDKC7140180195220mm/r0,09–0,150,11–0,180,15–0,25
    3IOGDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    3IILDKC7140110120140mm/r0,09–0,150,11–0,180,15–0,25
    4SOGDKCU25220250300mm/r0,09–0,150,11–0,180,15–0,25
    4SILDKC7140220250300mm/r0,09–0,150,11–0,180,15–0,25
    4UOGDKCU40150180220mm/r0,09–0,150,11–0,180,15–0,25
    4UILDKC7140150180220mm/r0,09–0,150,11–0,180,15–0,25
    4IOGDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    4IILDKC714090110140mm/r0,09–0,150,11–0,180,15–0,25
    5SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    5SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    5UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    5UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    5IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    5IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6SOGDKCU25180200220mm/r0,07–0,130,09–0,150,11–0,18
    6SILDKC7140180200220mm/r0,07–0,130,09–0,150,11–0,18
    6UOGDKCU40120135150mm/r0,07–0,130,09–0,150,11–0,18
    6UILDKC7140120135150mm/r0,07–0,130,09–0,150,11–0,18
    6IOGDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    6IILDKC71407085100mm/r0,07–0,130,09–0,150,11–0,18
    Metrico
    Gruppo materialiCondizioneSedeGeometriaQualitàVelocità di taglio vcVelocità di avanzamento consigliata (f) rispetto al diametro
    Intervallo m/min
    MinValore inizialeMaxØDFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    P1SOMDKCU25310325360mm/giro0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    UOMDKCU40200215230mm/giro0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    IOMDKC7140130135150mm/giro0,09–0,150,11–0,180,15–0,25
    IMDKC7140
    2SOGDKCPK10310325360mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40200215230mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOMDKC7140130135150mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    3SOGDKCPK10260285320mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40180195220mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC7140110120140mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    4SOGDKCU25220250300mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    UOGDKCU40150180220mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    IOGDKC714090110140mm/giro0,09–0,150,11–0,180,15–0,25
    ILDKC7140
    5SOGDKCU25180200220mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    6SOGDKCU25180200220mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    UOGDKCU40120135150mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    IOGDKC71407085100mm/giro0,07–0,130,09–0,150,11–0,18
    ILDKC7140
    M1SOMDKC7140150190230mm/giro0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC7140100130160mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC71406080100mm/giro0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    2SOMDKC7140150180210mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    UOMDKC7140100130160mm/giro0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    IOMDKC71406080100mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    3SOMDKC7140100130160mm/giro0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    UOMDKC714080110140mm/giro0,07–0,130,08–0,160,10–0,18
    IMDKC7140
    IOMDKC7140507090mm/giro0,07-0,130,08-0,160,10-0,18
    IMDKC7140
    Metrico
    Velocità di taglio vc
    Intervallo m/minVelocità di avanzamento consigliata (f) rispetto al diametro
    Gruppo materialiCondizioneSedeGeometriaQualitàMinValore inizialeMax Ø DFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    M1SOMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1SIMDKC7140150190230mm/r0,07–0,130,08–0,160,10–0,18
    1UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    1IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    1IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2SOMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2SIMDKC7140150180210mm/r0,07–0,130,08–0,160,10–0,18
    2UOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2UIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    2IOMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    2IIMDKC71406080100mm/r0,07–0,130,08–0,160,10–0,18
    3SOMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3SIMDKC7140100130160mm/r0,07–0,130,08–0,160,10–0,18
    3UOMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3UIMDKC714080110140mm/r0,07–0,130,08–0,160,10–0,18
    3IOMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    3IIMDKC7140507090mm/r0,07–0,130,08–0,160,10–0,18
    Metrico
    Gruppo materialiCondizioneSedeGeometriaQualitàVelocità di taglio vcVelocità di avanzamento consigliata (f) rispetto al diametro
    Intervallo m/min
    MinValore inizialeMaxØDFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/giro0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40300400500mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    2SOSTKD1425375550775mm/giro0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40175250325mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/giro0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    4SOSTKD1425400600800mm/giro0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    5SOSTKD1425400600800mm/giro0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/giro0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOGDKCU40250350450mm/giro0,07–0,090,10–0,140,12–0,16
    IGDKCU40
    IOGDKMF200300400mm/giro0,07–0,090,10–0,140,12–0,16
    IGDKMF
    Metrico
    Velocità di taglio vc
    Intervallo m/minVelocità di avanzamento consigliata (f) rispetto al diametro
    Gruppo materialiCondizioneSedeGeometriaQualitàMinValore inizialeMax Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    K1SOGDKCPK10200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1SILDKCU40200240300mm/tr0,10–0,180,12–0,200,14–0,24
    1UOGDKCU25120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1UILDKC7140120155200mm/tr0,10–0,180,12–0,200,14–0,24
    1IOGDKCU4080100125mm/tr0,10–0,180,12–0,200,14–0,24
    1IILDKC714080100125mm/tr0,10–0,180,12–0,200,14–0,24
    2SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    2UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    2IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    2IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3SOGDKCPK10180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3SILDKCU40180220260mm/tr0,10–0,180,12–0,200,14–0,24
    3UOGDKCU25110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3UILDKC7140110140170mm/tr0,10–0,180,12–0,200,14–0,24
    3IOGDKCU4080100120mm/tr0,10–0,180,12–0,200,14–0,24
    3IILDKC714080100120mm/tr0,10–0,180,12–0,200,14–0,24
    Metrico
    Gruppo materialiCondizioneSedeGeometriaQualitàVelocità di taglio vcVelocità di avanzamento consigliata (f) rispetto al diametro
    Intervallo m/min
    MinValore inizialeMaxØDFR02... 12,50–16,00DFR03... 16,50–20,00DFR04... 20,50–24,00
    K1SOGDKCPK10200240300mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25120155200mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100125mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    2SOGDKCPK10180220260mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    3SOGDKCPK10180220260mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKCU40
    UOGDKCU25110140170mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    IOGDKCU4080100120mm/giro0,10–0,180,12–0,200,14–0,24
    ILDKC7140
    N1SOSTKD1425400600800mm/giro0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40300400500mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40200300400mm/giro0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    2SOSTKD1425375550775mm/giro0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/giro0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40175250325mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    3SOSTKD1425350500650mm/giro0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOLDKCU40250350450mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    IOLDKCU40150250350mm/giro0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    4SOSTKD1425400600800mm/giro0,07–0,090,10–0,140,12–0,16
    ISTKD1425
    UOLDKCU40250350450mm/giro0,07-0,090,10-0,140,12-0,16
    ILDKCU40
    IOLDKCU40200300400mm/giro0,07–0,090,10–0,140,12–0,16
    ILDKCU40
    6SOSTKD1425400600800mm/giro0,07-0,090,10-0,140,12-0,16
    ISTKD1425
    UOHPKCU40250350450mm/giro0,07–0,090,10–0,140,12–0,16
    IHPKCU40
    IOHPKMF200300400mm/giro0,07-0,090,10-0,140,12-0,16
    IHPKMF
    Metrico
    Velocità di taglio vc
    Intervallo m/minVelocità di avanzamento consigliata (f) rispetto al diametro
    Gruppo materialiCondizioneSedeGeometriaQualitàMinValore inizialeMax Ø DFR02... 12,50–16,00mmDFR03... 16,50–20,00mmDFR04... 20,50–24,00mm
    N1SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    1UOLDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1UILDKCU40300400500mm/r0,07–0,090,10–0,140,12–0,16
    1IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    1IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    2SOSTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2SISTKD1425375550775mm/r0,07–0,090,10–0,140,12–0,16
    2UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    2IOLDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    2IILDKCU40175250325mm/r0,07–0,090,10–0,140,12–0,16
    3SOSTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3SISTKD1425350500650mm/r0,07–0,090,10–0,140,12–0,16
    3UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    3IOLDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    3IILDKCU40150250350mm/r0,07–0,090,10–0,140,12–0,16
    4SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    4UOLDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4UILDKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    4IOLDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    4IILDKCU40200300400mm/r0,07–0,090,10–0,140,12–0,16
    6SOSTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6SISTKD1425400600800mm/r0,07–0,090,10–0,140,12–0,16
    6UOHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6UIHPKCU40250350450mm/r0,07–0,090,10–0,140,12–0,16
    6IOHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    6IIHPKMF200300400mm/r0,07–0,090,10–0,140,12–0,16
    Metrico
    Gruppo materialiCondizioneSedeGeometriaQualitàVelocità di taglio vcVelocità di avanzamento consigliata (f) rispetto al diametro
    Intervallo m/min
    MinValore inizialeMaxØDFR02... 12,50 16,00mmDFR03... 16,50 20,00mmDFR04... 20,50 24,00mm
    S1SOGDKCU40607075mm/giro0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40405060mm/giro0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040mm/giro0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    2SOGDKCU40506070mm/giro0,04–0,060,05–0,080,06–0,10
    ILDKCU40
    UOGDKCU40304050mm/giro0,04–0,060,05–0,080,06–0,10
    ILDKC7140
    IOMDKC7140253040mm/giro0,04–0,060,05–0,080,06–0,10
    IMDKC7140
    3SOGDKCU40708090mm/giro0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070mm/giro0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050mm/giro0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    4SOGDKCU40708090mm/giro0,05–0,080,06–0,100,06–0,10
    ILDKCU40
    UOGDKCU40506070mm/giro0,05–0,080,06–0,100,06–0,10
    ILDKC7140
    IOMDKC7140304050mm/giro0,05–0,080,06–0,100,06–0,10
    IMDKC7140
    Metrico
    Velocità di taglio vc
    Intervallo m/minVelocità di avanzamento consigliata (f) rispetto al diametro
    Gruppo materialiCondizioneSedeGeometriaQualitàMinValore inizialeMax Ø DFR02... 12,50-16,00 mmDFR03... 16,50-20,00 mmDFR04... 20,50-24,00 mm
    S1SOGDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1SILDKCU40607075mm/r0,04–0,060,05–0,080,06–0,10
    1UOGDKCU40405060mm/r0,04–0,060,05–0,080,06–0,10
    1UILDKC7140405060mm/r0,04–0,060,05–0,080,06–0,10
    1IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    1IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2SOGDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2SILDKCU40506070mm/r0,04–0,060,05–0,080,06–0,10
    2UOGDKCU40304050mm/r0,04–0,060,05–0,080,06–0,10
    2UILDKC7140304050mm/r0,04–0,060,05–0,080,06–0,10
    2IOMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    2IIMDKC7140253040mm/r0,04–0,060,05–0,080,06–0,10
    3SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    3UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    3UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    3IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    3IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4SOGDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4SILDKCU40708090mm/r0,05–0,080,06–0,100,06–0,10
    4UOGDKCU40506070mm/r0,05–0,080,06–0,100,06–0,10
    4UILDKC7140506070mm/r0,05–0,080,06–0,100,06–0,10
    4IOMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10
    4IIMDKC7140304050mm/r0,05–0,080,06–0,100,06–0,10

    DFR™ • PCD • Sistema metrico

    Metrico
    Gruppo materialiCondizioneSedeGeometriaQualitàVelocità di taglio vcVelocità di avanzamento consigliata (f) rispetto al diametro
    Intervallo m/min
    MinValore inizialeMaxØDFR04 20,50–24,00mm
    N1SOSTKD1425396720841mm/giro0,06–0,08
    ISTKD1425
    2SOSTKD1425369670782mm/giro0,12–0,18
    ISTKD1425
    3SOSTKD1425341619723mm/giro0,12–0,18
    ISTKD1425
    4SOSTKD1425475720841mm/giro0,12–0,18
    ISTKD1425
    5SOSTKD1425480720864mm/giro0,06–0,08
    ISTKD1425
    Pollici
    Gruppo materialiCondizioneSedeGeometriaQualitàVelocità di taglio vcVelocità di avanzamento consigliata (f) rispetto al diametro
    Intervallo SFM
    MinValore inizialeMaxØDFR04 .813"–1.00"
    N1SOSTKD1425130023622760IPR.002–.003
    ISTKD1425
    2SOSTKD1425120921972567IPR.005–.007
    ISTKD1425
    3SOSTKD1425111820322374IPR.005–.007
    ISTKD1425
    4SOSTKD1425156023622760IPR.005–.007
    ISTKD1425
    5SOSTKD1425157523622834IPR.002–.003
    ISTKD1425
    Metrico
    Velocità di taglio vc
    Intervallo m/minVelocità di avanzamento consigliata (f) rispetto al diametro
    Gruppo materialiCondizioneSedeGeometriaQualitàMinValore inizialeMaxØDFR04 20,50–24,00 mm
    N1SOSTKD1425396720841mm/r0,06–0,08
    1SISTKD1425396720841mm/r0,06–0,08
    2SOSTKD1425369670782mm/r0,12–0,18
    2SISTKD1425369670782mm/r0,12–0,18
    3SOSTKD1425341619723mm/r0,12–0,18
    3SISTKD1425341619723mm/r0,12–0,18
    4SOSTKD1425475720841mm/r0,12–0,18
    4SISTKD1425475720841mm/r0,12–0,18
    5SOSTKD1425480720864mm/r0,06–0,08
    5SISTKD1425480720864mm/r0,06–0,08
    Si sta per aggiungere alla pagina Le mie soluzioni. Continuare?
    Select the destination where you want to move a.
    Novità Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Inserire un nome valido
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO Catalogo

    ANSI Catalogo

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Per visualizzare le informazioni sul dashboard è necessario eseguire l’accesso
    Session expired due to inactivity, please login again
    Il prodotto/prodotti () che si sta/stanno tentando di aggiungere al carrello non è/sono disponibile/i contattare il Servizio clienti.
    articolo/i aggiunto/i correttamente al carrello
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalogo Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          AnnullaOk