Surfaçage
Fraisage de côté/avec épaulement : Léger chanfrein
Fraisage — 3 taillesDownloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 4102923 |
| Ref. ISO Catalogue | MEGA45D200C07LN24 |
| Ref. ANSI Catalogue | MEGA45D200C07LN24 |
| [D1] Diamètre effectif de coupe | 200 mm |
| [D1] Diamètre effectif de coupe | 7.874 in |
| [D1MAX] Diamètre de coupe maximal | 235.35 mm |
| [D1MAX] Diamètre de coupe maximal | 9.266 in |
| [D] Adaptateur / Queue / Diamètre d’alésage | 60 mm |
| [D] Adaptateur / Queue / Diamètre d’alésage | 2.3622 in |
| [D2] Diamètre maximal du corps | 239 mm |
| [D2] Diamètre maximal du corps | 9.409 in |
| [D4] Cercle de perçage 4 | 101.6 mm |
| [D4] Cercle de perçage 3 | 4 in |
| [D6] Diamètre du moyeu | 160 mm |
| [D6] Diamètre du moyeu | 6.299 in |
| [L] Longueur totale | 63 mm |
| [L] Longueur totale | 2.48 in |
| [AP1MAX] 1re profondeur de coupe maximale | 17.15 mm |
| [AP1MAX] 1re profondeur de coupe maximale | 0.675 in |
| Nombre de plaquettes | 7 |
| Poids en kilogrammes | 8.41 |
| T/Min max | 9970 |
SurfaçageFraisage de côté/avec épaulement : Léger chanfreinFraisage — 3 taillesCréez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .S..HD | 0,33 | 0,83 | 1,34 | 0,24 | 0,60 | 0,96 | 0,18 | 0,45 | 0,71 | 0,16 | 0,39 | 0,62 | 0,14 | 0,36 | 0,57 | .S..HD |
| .S..HD2 | 0,33 | 0,91 | 1,53 | 0,24 | 0,66 | 1,09 | 0,18 | 0,49 | 0,81 | 0,16 | 0,43 | 0,71 | 0,14 | 0,39 | 0,65 | .S..HD2 |
| Travaux légers | Applications générales | Travaux lourds |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 | ||||||||||||
| .S..HD | .013 | .033 | .053 | .009 | .023 | .038 | .007 | .018 | .028 | .006 | .015 | .024 | .006 | .014 | .022 | .S..HD |
| .S..HD2 | .013 | .036 | .060 | .009 | .026 | .043 | .007 | .019 | .032 | .006 | .017 | .028 | .006 | .015 | .025 | .S..HD2 |
| Travaux légers | Applications générales | Travaux lourds |
| Groupe Matières | KC520M | KC725M | KCK15 | KCPK30 | KCPK30 | |||||||||||
| P | 1 | – | – | – | 315 | 275 | 255 | – | – | – | 545 | 475 | 440 | – | – | – |
| 2 | – | – | – | 260 | 230 | 195 | – | – | – | 335 | 305 | 275 | – | – | – | |
| 3 | – | – | – | 240 | 205 | 170 | – | – | – | 305 | 275 | 250 | – | – | – | |
| 4 | – | – | – | 215 | 180 | 145 | – | – | – | 225 | 210 | 190 | – | – | – | |
| 5 | – | – | – | 180 | 160 | 145 | – | – | – | 310 | 275 | 255 | – | – | – | |
| 6 | – | – | – | 160 | 120 | 95 | – | – | – | 190 | 165 | – | – | – | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 325 | 295 | 260 | – | – | – | 505 | 460 | 410 | 355 | 320 | 285 | – | – | – |
| 2 | 255 | 225 | 215 | – | – | – | 400 | 355 | 330 | 280 | 255 | 230 | – | – | – | |
| 3 | 215 | 190 | 170 | – | – | – | 335 | 300 | 275 | 235 | 210 | 195 | – | – | – | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Groupe Matières | KC520M | KC725M | KCK15 | KCPK30 | |||||||||
| P | 1 | – | – | – | 1030 | 900 | 840 | – | – | – | 1780 | 1560 | 1450 |
| 2 | – | – | – | 860 | 760 | 640 | – | – | – | 1100 | 1000 | 900 | |
| 3 | – | – | – | 790 | 670 | 550 | – | – | – | 1000 | 900 | 820 | |
| 4 | – | – | – | 710 | 590 | 470 | – | – | – | 740 | 690 | 620 | |
| 5 | – | – | – | 590 | 530 | 470 | – | – | – | 1020 | 910 | 830 | |
| 6 | – | – | – | 520 | 400 | 310 | – | – | – | 620 | 540 | – | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| K | 1 | 1060 | 960 | 850 | – | – | – | 1660 | 1510 | 1340 | 1160 | 1050 | 940 |
| 2 | 830 | 740 | 700 | – | – | – | 1310 | 1170 | 1090 | 920 | 830 | 760 | |
| 3 | 700 | 620 | 560 | – | – | – | 1100 | 980 | 900 | 770 | 690 | 640 | |
| N | 1–2 | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | |
| Groupe Matières | Travaux légers | Applications générales | Travaux lourds | |||
| (géomètrie légère) | – | (géomètrie solide) | ||||
| résistance à l’usure |  | ténacité | ||||
| Géométrie | Nuance | Géométrie | Nuance | Géométrie | Nuance | |
| P1–P2 | .S..HD | KC725M | .S..HD | KCPK30 | .S..HD2 | KCPM40 |
| P3–P4 | .S..HD | KCPK30 | .S..HD2 | KCPK30 | .S..HD2 | KCPM40 |
| P5–P6 | .S..HD | KC725M | .S..HD2 | KCPK30 | .S..HD2 | KCPM40 |
| M1–M2 | .S..HD | KC725M | .S..HD2 | KCSM40 | .S..HD2 | KCPM40 |
| M3 | .S..HD | KCPK30 | .S..HD2 | KCSM40 | .S..HD2 | KCPM40 |
| K1–K2 | .S..HD | KC520M | .S..HD | KCK15 | .S..HD2 | KC520M |
| K3 | .S..HD | KC520M | .S..HD | KCK15 | .S..HD2 | KC520M |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | .S..HD | KC725M | .S..HD2 | KCSM40 | .S..HD2 | KCSM40 |
| S3 | .S..HD | KC725M | .S..HD2 | KCPM40 | .S..HD2 | KCSM40 |
| S4 | .S..HD | KC725M | .S..HD2 | KCSM40 | .S..HD2 | KCSM40 |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?