Downloaded file will be available after import in the {{cadTool}} tool library.
| Numéro de matériel | 5172840 |
| Ref. ISO Catalogue | RPPT43EGE |
| Ref. ANSI Catalogue | RPPT43EGE |
| Nuance | KCPK30 |
| [D] Taille de plaquette CI | 12.7 mm |
| [D] Taille de plaquette CI | 0.5 in |
| [S] Épaisseur de la plaquette | 4.76 mm |
| [S] Épaisseur de la plaquette | 0.188 in |
| Épaisseur moyenne du copeau [HM] | 0.064 mm |
| Épaisseur moyenne du copeau [HM] | 0.0025 in |
| Insérer le nombre d’index | 6 |
Grades
KCPK30
Substrat carbure avec revêtement multicouche CVD (TiN/TiCN/Al2O3) et traitement après revêtement Beyond™. Le substrat est très tenace. Le KCPK30 peut être utilisé dans toute une gamme d'applications pour le fraisage général et l'ébauche de l'acier et de la fonte. Les résultats optimum sont obtenus à sec, mais l'arrosage est également possible.
Créez une Solution pour calculer les avances et vitesses
Après avoir créé une Solution, choisissez simplement l'icône "Avances et Vitesses" et notre système vous fournira ses recommandations. Vous pouvez les personnaliser en ajoutant votre machine et vos spécifications techniques, ou en ajustant votre demande à l'aide des curseurs.
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | .E..LEJ |
| .E..GE | .006 | .010 | .015 | .004 | .008 | .011 | .004 | .007 | .010 | .004 | .006 | .009 | .004 | .006 | .009 | .E..GE |
| .S..GEJ | .007 | .017 | .023 | .005 | .013 | .017 | .004 | .011 | .015 | .004 | .010 | .014 | .004 | .010 | .014 | .S..GEJ |
| .S..GE | .007 | .017 | .023 | .005 | .013 | .017 | .004 | .011 | .015 | .004 | .010 | .014 | .004 | .010 | .014 | .S..GE |
| Travaux légers | Applications générales | Travaux lourds |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .004 | .006 | .008 | .003 | .004 | .006 | .003 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .005 | .E..LEJ |
| .E..GE | .007 | .012 | .017 | .005 | .009 | .013 | .004 | .008 | .011 | .004 | .007 | .010 | .004 | .007 | .010 | .E..GE |
| .S..GEJ | .008 | .020 | .027 | .006 | .015 | .020 | .005 | .013 | .017 | .005 | .012 | .016 | .005 | .012 | .016 | .S..GEJ |
| .S..GE | .008 | .020 | .027 | .006 | .015 | .020 | .005 | .013 | .017 | .005 | .012 | .016 | .005 | .012 | .016 | .S..GE |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .007 | .010 | .015 | .005 | .007 | .011 | .005 | .006 | .009 | .004 | .006 | .009 | .004 | .006 | .009 | .E..LEJ |
| .E..GE | .012 | .021 | .031 | .009 | .016 | .023 | .008 | .014 | .020 | .007 | .013 | .018 | .007 | .012 | .018 | .E..GE |
| .S..GEJ | .014 | .036 | .049 | .010 | .026 | .035 | .009 | .023 | .031 | .008 | .021 | .028 | .008 | .021 | .028 | .S..GEJ |
| .S..GE | .014 | .036 | .049 | .010 | .026 | .035 | .009 | .023 | .031 | .008 | .021 | .028 | .008 | .021 | .028 | .S..GE |
| Géométrie de plaquette | Avance par dent de départ recommandée (Fz) en relation avec le % de l'Engagement Radial (ae) | Géométrie de plaquette | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .005 | .007 | .011 | .004 | .005 | .008 | .003 | .005 | .007 | .003 | .004 | .006 | .003 | .004 | .006 | .E..LEJ |
| .E..GE | .009 | .015 | .023 | .007 | .011 | .017 | .006 | .010 | .014 | .005 | .009 | .014 | .005 | .009 | .013 | .E..GE |
| .S..GEJ | .010 | .026 | .035 | .008 | .019 | .026 | .007 | .017 | .022 | .006 | .015 | .021 | .006 | .015 | .020 | .S..GEJ |
| .S..GE | .010 | .026 | .035 | .008 | .019 | .026 | .007 | .017 | .022 | .006 | .015 | .021 | .006 | .015 | .020 | .S..GE |
| Groupe Matières | KC422M | KC522M | KC725M | KCPK30 | |||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | – | – | – | 900 | 820 | 720 | – | – | – | 1160 | 1050 | 940 |
| 2 | – | – | – | 710 | 640 | 590 | – | – | – | 920 | 830 | 760 | |
| 3 | – | – | – | 590 | 530 | 480 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | 4220 | 3720 | 3440 | – | – | – | – | – | – | – | – | – |
| 3 | 3720 | 3440 | 3000 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | |
| H | 1 | – | – | – | 470 | 360 | 280 | – | – | – | – | – | – |
| Réf. catalogue | Maximum Ramp Angle (ra) when hx = .01" and ae | Maximum Ramp Depth (ap) per pass when ae | Maximum Ramp Depth (ap) per pass when hx = .01" and ae ae1 | ae1 | Maximum Plunge Depth (ap) when hx = .01" and ae | ae2 | diamètre mini d'alésage (DH mini) | diamètre d'alésage maxi fond plat (DH1 maxi) | Maximum Hole Diameter (No Flat Bottom) |
| KSRM125R4303C125L600 | 5.30° | 0.055 | 0.250 | 0.406 | 0.250 | 0.500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302C125L600 | 5.95° | 0.061 | 0.250 | 0.413 | 0.250 | 0.500 | 1.674 | 2.001 | 2.500 |
| KSRM125R4303C125L1000 | 5.30° | 0.055 | 0.250 | 0.406 | 0.250 | 0.500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302C125L1000 | 5.95° | 0.061 | 0.250 | 0.413 | 0.250 | 0.500 | 1.674 | 2.001 | 2.500 |
| KSRM150R4304C125L600 | 4.74° | 0.069 | 0.250 | 0.421 | 0.250 | 0.500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303C125L600 | 5.31° | 0.077 | 0.250 | 0.429 | 0.250 | 0.500 | 2.142 | 2.502 | 3.000 |
| KSRM150R4304C125L1000 | 4.74° | 0.069 | 0.250 | 0.421 | 0.250 | 0.500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303C125L1000 | 5.31° | 0.077 | 0.250 | 0.429 | 0.250 | 0.500 | 2.142 | 2.502 | 3.000 |
| KSRM125R4303M16L150 | 5.30° | 0.055 | 0.250 | 0.406 | 0.250 | 0.500 | 1.688 | 2.001 | 2.500 |
| KSRM125R4302M16L150 | 6.43° | 0.065 | 0.250 | 0.418 | 0.250 | 0.500 | 1.665 | 2.001 | 2.500 |
| KSRM150R4304M16L150 | 4.74° | 0.069 | 0.250 | 0.421 | 0.250 | 0.500 | 2.157 | 2.502 | 3.000 |
| KSRM150R4303M16L150 | 5.31° | 0.077 | 0.250 | 0.429 | 0.250 | 0.500 | 2.142 | 2.502 | 3.000 |
| KSRM200R4305S075L197 | 11.43° | 0.250 | 0.250 | 0.499 | 0.250 | 0.500 | 3.001 | 3.501 | 4.000 |
| KSRM200R4303S075L197 | 11.45° | 0.250 | 0.250 | 0.499 | 0.250 | 0.500 | 3.001 | 3.501 | 4.000 |
| KSRM250R4306S075L197 | 8.16° | 0.250 | 0.250 | 0.500 | 0.250 | 0.500 | 4.001 | 4.500 | 5.000 |
| KSRM250R4304S075L197 | 8.16° | 0.250 | 0.250 | 0.500 | 0.250 | 0.500 | 4.001 | 4.500 | 5.000 |
| KSRM300R4307S100L197 | 6.35° | 0.250 | 0.250 | 0.500 | 0.250 | 0.500 | 5.001 | 5.500 | 6.000 |
| KSRM300R4305S100L197 | 6.35° | 0.250 | 0.250 | 0.500 | 0.250 | 0.500 | 5.001 | 5.500 | 6.000 |
| Groupe Matières | Travaux légers | Applications générales | Travaux lourds | |||
| – | (géomètrie légère) | – | (géomètrie solide) | |||
| – | résistance à l’usure |  | ténacité | |||
| – | Géométrie | Nuance | Géométrie | Nuance | Géométrie | Nuance |
| P1–P2 | .E..LEJ | KC725M | .E..GE | KC725M | .S..GE | KCPK30 |
| P3–P4 | .E..LEJ | KC725M | .S..GE | KCPK30 | – | – |
| P5–P6 | .E..GE | KCPK30 | .S..GE | KCPK30 | – | – |
| M1–M2 | .E..LEJ | KC725M | .E..LEJ | KC725M | .S..GE | KC725M |
| M3 | .S..GEJ | KC725M | .E..GE | KC725M | .S..GE | KCPK30 |
| K1–K2 | – | – | .S..GE | KCPK30 | – | – |
| K3 | – | – | .S..GE | KCPK30 | – | – |
| N1–N2 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| N3 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| S1–S2 | .E..LEJ | KC725M | .S..GEJ | KC725M | .S..GE | KC725M |
| S3 | .E..LEJ | KC725M | .S..GEJ | KC725M | .S..GE | KC725M |
| S4 | .E..LEJ | KC725M | .E..GE | KC725M | .S..GE | KC725M |
| H1 | – | – | .S..GE | KC522M | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
catalogue ISO
catalogue ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | catalogue ISO | Grade |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?