Benzer Ürün:
Mill 4-11™ • Carbide Insert • LNGU11-SGE • Medium Machining
Shoulder milling insert with four cutting edges per insert, precision ground
Ürün Numarası6132024
ISO Katalog NoLNGU110408SRGEANSI Catalog NoLNGU432SRGE
- P Steel
- M Stainless Steel
- S High-Temp Alloys
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Ürün Numarası | 6132024 |
ISO Katalog No | LNGU110408SRGE |
ANSI Catalog No | LNGU432SRGE |
Grade | KC725M |
[LI] Insert Length | 12.164 mm |
[LI] Insert Length | 0.479 in |
[S] Insert Thickness | 4.83 mm |
[S] Insert Thickness | 0.19 in |
[W] Insert Width | 6.6 mm |
[W] Insert Width | 0.2598 in |
[BS] Corner Facet Length | 1 mm |
[BS] Corner Facet Length | 0.039 in |
[Rε] Corner Radius | 0.8 mm |
[Rε] Corner Radius | 0.031 in |
Average Chip Thickness [HM] | 0.1 mm |
Average Chip Thickness [HM] | 0.0039 in |
Cutting Edges per Insert | 4 |
İş Parçası Malzemeleri
- Steel
- Stainless Steel
- High-Temp Alloys
Kaliteler
KC725M
Coated carbide grade with an advanced PVD TiAlN coating. KC725M is a high-performance grade for milling steel, stainless steel, and high-temperature alloys. The good thermal shock resistance of the substrate makes this grade ideal for both wet and dry machining. Primarily for use in general and heavy machining.
Özellikler ve avantajlar
- Precision ground insert for superior wall and surface finishes
İlerleme ve Devir hesaplamak için Çözüm Oluşturun
Bir çözüm oluşturduktan sonra, sadece İlerleme ve Devir simgesini seçin ve sistemimiz öneriler sunacaktır. Makinenizi ve teknik özelliklerinizi ekleyerek bilgileri özelleştirebilir veya kaydırıcıları kullanarak ayarlamalar yapabilirsiniz.
Uç Seçimi
Kesici uç seçme rehberi
Mill 4-11™ • Insert Selection Guide | ||||||
Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
– | (Hafif geometri) | – | (Sert geometri) | |||
– | Aşınma direnci | Tokluk | ||||
– | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
P1–P2 | .E..GD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
P3–P4 | .E..GD | KCPK30 | .S..GD | KCPK30 | .E..HD | KCPK30 |
P5–P6 | .E..GD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
M1–M2 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
M3 | .E..GD | KCPM40 | .S..GD | KCPM40 | .E..HD | KCPM40 |
K1–K2 | .E..GD | KCK20B | .E..GD | KCK20B | .S..GD | KCK15 |
K3 | .E..GD | KCK20B | .S..GD | KCK15 | .E..HD | KCPK30 |
N1–N2 | .F..LDJ | KC410M | .E..LDJ | KC422M | .E..LDJ | KC422M |
N3 | .F..LDJ | KC410M | .F..LDJ | KC410M | .F..LDJ | KC410M |
S1–S2 | .E..GD | KC725M | .S..GD | KC725M | .E..HD | KC725M |
S3 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
S4 | .E..GD | KCSM40 | .S..GD | KCSM40 | .E..HD | KCSM40 |
H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data