Indexable Inserts
Indexable inserts from Kennametal come in a range of shapes and geometries for several holemaking applications. Choose from specially designed high-precision inserts for better chip control while machining difficult materials to combination tool inserts that are perfect for chamfering and spot-facing in one operation. Kennametal's indexable inserts offer a wide range of options for machining at optimal performance.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (420)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(417)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(417)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(418)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(418)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(417)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(392)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(380)
- M Stainless Steel (418)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(418)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(418)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(394)
- K Cast Iron (382)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(382)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(382)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(382)
- N Non-Ferrous Materials (320)
- N1Wrought Aluminum (319)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(319)
- N3High-Silicon Aluminum Alloys Si >12.2%(303)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (293)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (308)
- N6Carbon, Graphite Composites, CFRP (281)
- N7MMC's (250)
- S High-Temp Alloys (383)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(371)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(371)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(383)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(383)
- H Hardened Materials (41)
- H1Hardened Materials 44-48 HRC(41)
- H2Hardened Materials 48-55 HRC(36)
- H3Hardened Materials 56-60 HRC(36)
- H4Hardened Materials >60 HRC(36)
- C CFRP Materials (2)
- C2CFRP / Aluminium CFRP / Non-Ferrous (2)
Select First Choice
- BR (50)
- CN (193)
- DE (193)
- GB (132)
- IN (75)
- SG (132)
- US (196)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (6)
- Interrupted (234)
- Lightly Interrupted Cut (6)
- Smooth Cut (23)
- Stable (343)
- Unstable (270)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (12)
- 1.0 (26)
- 2.0 (161)
- 3.0 (172)
- 4.0 (116)
to
Corner Radius
Corner Radius
- 0.008 in(20)
- 0.016 in(146)
- 0.024 in(6)
- 0.031 in(186)
- 0.033 in(9)
- 0.039 in(24)
- 0.047 in(42)
- 0.063 in(12)
- 0.079 in(10)
to
Corner Radius
Corner Radius
- 0.2 mm(20)
- 0.4 mm(146)
- 0.6 mm(6)
- 0.8 mm(186)
- 0.85 mm(9)
- 1.0 mm(24)
- 1.2 mm(42)
- 1.6 mm(12)
- 2.0 mm(10)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (11)
- K313 (2)
- KC5010 (8)
- KC5025 (6)
- KC7015 (6)
- KC7140 (66)
- KC720 (8)
- KC7215 (38)
- KC7225 (1)
- KC7315 (14)
- KCMS35 (18)
- KCMS40 (15)
- KCP10B (1)
- KCPK10 (40)
- KCU25 (104)
- KCU40 (119)
- KD1425 (6)
- KM1 (7)
- KMF (11)
- KT315 (6)
Countersunk Angle
Countersunk Angle
- 30.0 (4)
- 41.0 (4)
- 45.0 (18)
to
Front-End
Cutting Width
Cutting Width
- 0.2283 in(1)
- 0.2402 in(1)
- 0.3858 in(2)
to
Cutting Width
Cutting Width
- 5.8 mm(1)
- 6.1 mm(1)
- 9.8 mm(2)
to
Insert Shape
Insert Shape
- B-PARALLELOGRAM 82 (34)
- C-DIAMOND/RHOMBIC 80 (23)
- COUNTERBORE/COUNTERSINK MISC (32)
- D-DIAMOND/RHOMBIC 90 (30)
- S-SQUARE 90 (185)
- T-TRIANGLE 60 (12)
- X-TRIGON 84 (156)
Insert Geometry
Shape
Shape
- B-PARALLELOGRAM 82 (34)
- C-DIAMOND/RHOMBIC 80 (23)
- COUNTERBORE/COUNTERSINK MISC (32)
- D-DIAMOND/RHOMBIC 90 (30)
- S-SQUARE 90 (185)
- T-TRIANGLE 60 (12)
- X-TRIGON 84 (156)
Insert IC Size
Insert IC Size
- 5.0 mm(7)
- 5.425 mm(2)
- 5.55 mm(13)
- 6.0 mm(47)
- 6.35 mm(38)
- 7.8 mm(2)
- 7.925 mm(16)
- 7.95 mm(24)
- 8.0 mm(44)
- 9.525 mm(54)
- 10.0 mm(36)
- 12.0 mm(29)
- 12.7 mm(40)
- 15.0 mm(27)
- 15.725 mm(22)
- 15.875 mm(9)
- 17.6 mm(9)
to
Insert IC Size
Insert IC Size
- 0.197 in(7)
- 0.214 in(2)
- 0.219 in(13)
- 0.236 in(47)
- 0.25 in(38)
- 0.307 in(2)
- 0.312 in(16)
- 0.313 in(24)
- 0.315 in(44)
- 0.375 in(54)
- 0.394 in(36)
- 0.472 in(29)
- 0.5 in(40)
- 0.591 in(27)
- 0.619 in(22)
- 0.625 in(9)
- 0.693 in(9)
to
Cutting Edge Length
Cutting Edge Length
- 3.31 mm(7)
- 3.97 mm(28)
- 5.19 mm(1)
- 5.29 mm(28)
- 5.417 mm(6)
- 5.42 mm(2)
- 5.646 mm(4)
- 6.207 mm(10)
- 6.21 mm(2)
- 6.35 mm(13)
- 6.448 mm(6)
- 6.45 mm(4)
- 6.52 mm(1)
- 6.62 mm(35)
- 7.797 mm(15)
- 7.8 mm(2)
- 7.84 mm(1)
- 7.937 mm(22)
- 7.94 mm(28)
- 9.38 mm(2)
- 9.382 mm(20)
- 9.525 mm(20)
- 9.63 mm(3)
- 9.672 mm(9)
- 9.83 mm(1)
- 9.92 mm(26)
- 11.0 mm(3)
- 11.53 mm(1)
- 11.63 mm(4)
- 11.64 mm(4)
- 12.557 mm(14)
- 12.56 mm(2)
- 12.7 mm(33)
- 13.75 mm(3)
- 15.73 mm(2)
- 15.732 mm(20)
- 16.5 mm(3)
to
Cutting Edge Length
Cutting Edge Length
- 0.13 in(1)
- 0.1302 in(6)
- 0.156 in(28)
- 0.205 in(1)
- 0.208 in(28)
- 0.213 in(8)
- 0.2223 in(4)
- 0.244 in(12)
- 0.25 in(13)
- 0.2539 in(10)
- 0.257 in(1)
- 0.26 in(30)
- 0.2605 in(5)
- 0.307 in(17)
- 0.309 in(1)
- 0.3125 in(22)
- 0.313 in(28)
- 0.369 in(2)
- 0.3694 in(20)
- 0.375 in(20)
- 0.3791 in(3)
- 0.3808 in(9)
- 0.387 in(1)
- 0.391 in(26)
- 0.4331 in(3)
- 0.454 in(1)
- 0.458 in(4)
- 0.4582 in(4)
- 0.494 in(2)
- 0.4944 in(14)
- 0.5 in(33)
- 0.5413 in(3)
- 0.619 in(22)
- 0.65 in(3)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 20 (33)
- 21 (30)
- 22 (4)
- DS (34)
- FN (1)
- FP (27)
- GD (49)
- HD (4)
- HP (102)
- HPF (5)
- LD (13)
- LF (22)
- LP (12)
- MD (104)
Cutting Tool Material
Cutting Tool Material
- D P (6)
- H T (6)
- H W (475)
Tolerance Class
Tolerance Class
- G (53)
- H (12)
- M (23)
- P (68)
No filters matching ""
For any technical inquiries, please reach out to us via our Customer Support center