Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Zajistěte si tyto akce, než bude pozdě! Nakupujte nyní.

Řada 7792VX je určena pro frézování vysokým posuvem a s vynikající kvalitou povrchu

  • Model 7792VX nabízí několik použití: čelní frézování, kapsování, sestupné frézování, spirálovou interpolaci a zapichování.
  • Dokonalé řešení, když požadujete vysokou rychlost odebírání kovu a kratší dobu cyklu.
  • Při použití dlouhých (prodloužených) držáků nástrojů snižuje model 7792VX ohyb přesměrováním řezných sil na vřeteno.
  • Frézy s hrubou a jemnou roztečí jsou k dostání s vnitřním chlazením.
  • Břitové destičky s integrovanou fazetou Wiper vytvářejí vynikající povrch až do 16Ra (1,6 μm).
Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (251)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(225)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(225)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(225)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(225)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(231)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(241)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(241)
    • M Stainless Steel (241)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(241)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(241)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(241)
    • K Cast Iron (189)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(189)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(189)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(187)
    • N Non-Ferrous Materials (124)
      • N1
        Wrought Aluminum (124)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(124)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(124)
    • S High-Temp Alloys (239)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(231)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(231)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(231)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(239)
    • H Hardened Materials (177)
      • H1
        Hardened Materials 44-48 HRC(177)
      • H2
        Hardened Materials 48-55 HRC(151)
    Vybrat první volbu
    • BR (8)
    • DE (101)
    • GB (69)
    • IN (16)
    • SG (5)
    • US (75)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (14)
    • Face MillingFace Milling (147)
    • PocketPocket (146)
    • Pocket HelicalPocket Helical (146)
    • Pocket MillingPocket Milling (146)
    • Pocket Plunge MillingPocket Plunge Milling (134)
    • Profile MillingProfile Milling (146)
    • RampingRamping (146)
    • Slot MillingSlot Milling (62)
    • Slot SideSlot Side (62)
    Cutting Diameter
    Cutting Diameter
    • 6.846 mm(1)
    • 7.159 mm(1)
    • 7.161 mm(1)
    • 7.6 mm(1)
    • 9.652 mm(2)
    • 9.905 mm(1)
    • 10.6 mm(2)
    • 10.85 mm(2)
    • 11.6 mm(1)
    • 11.75 mm(2)
    • 11.98 mm(3)
    • 12.379 mm(3)
    • 13.21 mm(1)
    • 13.616 mm(2)
    • 13.864 mm(2)
    • 15.926 mm(1)
    • 15.979 mm(1)
    • 16.002 mm(3)
    • 16.239 mm(1)
    • 16.6 mm(1)
    • 16.843 mm(1)
    • 17.206 mm(1)
    • 18.714 mm(1)
    • 18.728 mm(1)
    • 18.75 mm(1)
    • 18.754 mm(1)
    • 18.756 mm(1)
    • 18.964 mm(4)
    • 19.558 mm(1)
    • 19.939 mm(2)
    • 21.835 mm(1)
    • 21.96 mm(2)
    • 22.352 mm(2)
    • 23.6 mm(2)
    • 23.83 mm(1)
    • 24.892 mm(1)
    • 25.11 mm(1)
    • 25.83 mm(1)
    • 26.074 mm(1)
    • 26.076 mm(1)
    • 26.67 mm(1)
    • 26.75 mm(3)
    • 26.873 mm(1)
    • 27.069 mm(1)
    • 27.101 mm(1)
    • 28.085 mm(1)
    • 28.954 mm(1)
    • 31.574 mm(1)
    • 31.818 mm(1)
    • 32.41 mm(3)
    • 32.617 mm(1)
    • 33.6 mm(3)
    • 33.617 mm(1)
    • 36.75 mm(1)
    • 36.95 mm(1)
    • 36.951 mm(1)
    • 37.541 mm(1)
    • 37.75 mm(2)
    • 38.95 mm(2)
    • 38.965 mm(1)
    • 39.16 mm(2)
    • 39.655 mm(2)
    • 42.045 mm(1)
    • 44.6 mm(2)
    • 44.809 mm(1)
    • 45.305 mm(1)
    • 45.308 mm(1)
    • 45.314 mm(1)
    • 47.6 mm(1)
    • 47.806 mm(1)
    • 47.807 mm(1)
    • 49.947 mm(3)
    • 52.254 mm(2)
    • 52.947 mm(3)
    • 56.034 mm(1)
    • 56.035 mm(1)
    • 57.81 mm(2)
    • 58.001 mm(1)
    • 61.6 mm(2)
    • 61.801 mm(1)
    • 75.968 mm(1)
    • 75.969 mm(1)
    • 77.365 mm(2)
    • 77.565 mm(2)
    • 81.6 mm(2)
    • 81.705 mm(1)
    • 83.305 mm(3)
    • 100.58 mm(1)
    • 100.928 mm(2)
    • 102.925 mm(1)
    • 106.6 mm(2)
    • 106.705 mm(1)
    • 108.458 mm(1)
    • 108.7 mm(1)
    • 108.704 mm(1)
    • 128.28 mm(1)
    • 128.286 mm(2)
    • 133.858 mm(1)
    • 134.087 mm(1)
    • 134.5 mm(1)
    • 135.883 mm(1)
    • 141.6 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 15.875 mm(2)
    • 16.0 mm(2)
    • 19.05 mm(3)
    • 20.0 mm(3)
    • 25.0 mm(7)
    • 25.015 mm(1)
    • 25.2 mm(1)
    • 25.4 mm(6)
    • 31.55 mm(1)
    • 31.75 mm(7)
    • 31.764 mm(1)
    • 32.0 mm(11)
    • 35.0 mm(4)
    • 37.9 mm(1)
    • 38.1 mm(5)
    • 40.0 mm(5)
    • 42.0 mm(2)
    • 50.0 mm(8)
    • 50.6 mm(2)
    • 50.8 mm(7)
    • 51.8 mm(4)
    • 52.0 mm(4)
    • 63.0 mm(8)
    • 63.3 mm(1)
    • 63.5 mm(4)
    • 66.0 mm(7)
    • 76.2 mm(4)
    • 76.201 mm(1)
    • 79.8 mm(1)
    • 80.0 mm(4)
    • 100.0 mm(5)
    • 101.3 mm(2)
    • 101.6 mm(5)
    • 125.0 mm(5)
    • 127.0 mm(5)
    • 152.4 mm(5)
    • 160.0 mm(3)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.875 mm(1)
    • 0.9 mm(20)
    • 1.5 mm(41)
    • 1.93 mm(1)
    • 2.5 mm(53)
    • 3.5 mm(30)
    • 3.501 mm(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 25.0 mm(3)
    • 25.4 mm(1)
    • 32.0 mm(7)
    • 35.0 mm(11)
    • 39.8 mm(1)
    • 39.98 mm(1)
    • 40.0 mm(39)
    • 40.01 mm(1)
    • 43.0 mm(14)
    • 44.45 mm(1)
    • 45.0 mm(7)
    • 50.0 mm(27)
    • 50.8 mm(1)
    • 63.0 mm(20)
    • 69.98 mm(1)
    • 70.0 mm(6)
    • 76.2 mm(3)
    • 102.0 mm(3)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 10.0 (15)
    • 11.0 (1)
    • 12.0 (52)
    • 12.5 (3)
    • 13.0 (29)
    • 15.0 (18)
    • 16.0 (29)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (77)
    • KL Screw (6)
    • SHCS or RetScrw Or BoltCircle (7)
    • Screw-On Connection (28)
    • Straight-Cylindrical (25)
    • Weldon (4)
    Number of Flutes
    Number of Flutes
    • 10 (3)
    • 11 (6)
    • 12 (4)
    • 13 (4)
    • 15 (1)
    • 2 (17)
    • 3 (28)
    • 4 (23)
    • 5 (21)
    • 6 (16)
    • 7 (10)
    • 8 (6)
    • 9 (8)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 32.0 mm(5)
    • 40.0 mm(34)
    • 43.0 mm(1)
    • 43.4 mm(1)
    • 45.0 mm(7)
    • 50.0 mm(24)
    • 54.0 mm(3)
    • 55.0 mm(1)
    • 57.0 mm(7)
    • 63.0 mm(20)
    • 66.0 mm(11)
    • 67.5 mm(3)
    • 68.95 mm(1)
    • 96.01 mm(1)
    • 97.892 mm(1)
    • 97.912 mm(1)
    • 100.0 mm(1)
    • 170.25 mm(1)
    • 172.0 mm(2)
    • 188.0 mm(2)
    • 200.0 mm(4)
    • 203.2 mm(1)
    • 205.587 mm(1)
    • 210.0 mm(1)
    • 211.94 mm(1)
    • 247.94 mm(1)
    • 250.0 mm(8)
    • 254.0 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    availability
    gsaApproval
    gsaApproval
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.8 mm(166)
    • 1.0 mm(26)
    • 1.2 mm(163)
    • 1.5 mm(64)
    • 1.6 mm(34)
    • 2.0 mm(90)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • GH2 (97)
    • KC510M (77)
    • KC522M (167)
    • KC725M (97)
    • KCK15 (97)
    • KCK20B (97)
    • KCKP10 (120)
    • KCPK30 (155)
    • KCPM40 (167)
    • KCSM40 (167)
    • SC6525 (43)
    • SP6519 (155)
    • X400 (151)
    • X500 (161)
    Hand Of Tool
    Hand Of Tool
    • R (147)
    Wiper Insert
    Wiper Insert
    • N (110)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.19 (2)
    • 0.2 (1)
    • 0.23 (3)
    • 0.24 (6)
    • 0.27 (1)
    • 0.3 (1)
    • 0.31 (3)
    • 0.32 (7)
    • 0.42 (6)
    • 0.45 (9)
    • 0.5 (6)
    • 0.58 (4)
    • 0.6 (5)
    • 0.7 (5)
    • 0.71 (3)
    • 0.8 (7)
    • 0.86 (4)
    • 0.9 (4)
    • 0.93 (2)
    • 0.95 (4)
    • 1.0 (1)
    • 1.1 (1)
    • 1.27 (1)
    • 1.29 (1)
    • 1.3 (1)
    • 1.33 (3)
    • 1.36 (4)
    • 1.39 (1)
    • 1.4 (1)
    • 1.43 (2)
    • 1.44 (1)
    • 1.5 (9)
    • 1.8 (8)
    • 2.11 (4)
    • 2.23 (2)
    • 2.28 (1)
    • 2.55 (1)
    • 2.7 (5)
    • 2.8 (4)
    • 2.84 (1)
    • 2.85 (1)
    • 3.42 (3)
    • 3.86 (3)
    • 5.94 (2)
    • 6.06 (1)
    • 6.09 (1)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 13.78 mm(1)
    • 13.8 mm(1)
    • 17.2 mm(2)
    • 21.0 mm(1)
    • 22.27 mm(1)
    • 22.4 mm(1)
    • 22.5 mm(1)
    • 22.6 mm(1)
    • 23.0 mm(1)
    • 23.3 mm(1)
    • 23.38 mm(1)
    • 26.87 mm(1)
    • 28.8 mm(1)
    • 28.95 mm(1)
    • 29.0 mm(3)
    • 29.34 mm(1)
    • 29.65 mm(1)
    • 29.74 mm(1)
    • 29.9 mm(1)
    • 29.98 mm(1)
    • 29.99 mm(2)
    • 33.9 mm(1)
    • 36.08 mm(1)
    • 38.0 mm(2)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (110)
    Insert IC Size
    Insert IC Size
    • 6.825 mm(3)
    • 7.0 mm(9)
    • 9.225 mm(11)
    • 9.275 mm(8)
    • 9.525 mm(21)
    • 12.15 mm(5)
    • 12.175 mm(17)
    • 12.7 mm(23)
    • 16.3 mm(3)
    • 16.8 mm(10)
    Insert IC Size MinkomuInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • D (23)
    • D41 (23)
    • D411 (7)
    • D721 (2)
    • GP (8)
    • M (10)
    • M41 (37)
    Cutting Tool Material
    Cutting Tool Material
    • H W (110)
    Tolerance Class
    Tolerance Class
    • E (22)
    • L (25)
    • P (63)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (29)
    • SCREW-ON (28)
    • SHELL MILL (90)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(2)
    • 13.0 mm(2)
    • 15.875 mm(1)
    • 16.0 mm(4)
    • 18.0 mm(4)
    • 19.05 mm(10)
    • 20.0 mm(1)
    • 21.0 mm(7)
    • 22.0 mm(22)
    • 22.01 mm(2)
    • 25.0 mm(4)
    • 25.4 mm(14)
    • 27.0 mm(11)
    • 27.012 mm(1)
    • 29.0 mm(15)
    • 31.75 mm(11)
    • 31.76 mm(1)
    • 32.0 mm(11)
    • 38.1 mm(13)
    • 38.11 mm(1)
    • 40.0 mm(8)
    • 40.012 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    7792 High-Feed • Stellram
    7792 High-Feed • IC 12 • Stellram
    (99)

    7792 High-Feed • IC 12 • Stellram

    7792 High-Feed • IC 09 • Stellram
    (81)

    7792 High-Feed • IC 09 • Stellram

    7792 High-Feed • IC 16 • Stellram
    (44)

    7792 High-Feed • IC 16 • Stellram

    7792 High-Feed • IC 06 • Stellram
    (33)

    7792 High-Feed • IC 06 • Stellram

    Máte na nás otázky?

    Náš kvalifikovaný personál je připraven pomoci.

    Kontaktujte Prodejce

    V případě technických dotazů prosím kontaktujte centrum Technické podpory

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Select the project where you want to add product(s) komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    Product(s) successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk