Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Zajistěte si tyto akce, než bude pozdě! Nakupujte nyní.

Závitování LT

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (375)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(375)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(375)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(375)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(375)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(375)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(375)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(375)
    • M Stainless Steel (477)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(477)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(477)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(477)
    • K Cast Iron (349)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(349)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(349)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(349)
    • S High-Temp Alloys (477)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(477)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(477)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(477)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(477)
    Vybrat první volbu
    • DE (63)
    • GB (41)
    • SG (36)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (211)
    • OD Thread TurningOD Thread Turning (263)
    • ThreadingThreading (67)
    Type of Thread
    Type of Thread
    • 55 (101)
    • 60 (154)
    • ACME (75)
    • API (33)
    • API BUTTRESS (28)
    • API RD (68)
    • BSPT (56)
    • BSW (144)
    • M (212)
    • NPT (90)
    • NPTF (56)
    • RD DIN 405 (78)
    • STUB ACME (87)
    • TR DIN 103 (104)
    • UN (170)
    • UNJ (89)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (120)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (1)
    • Boring Bar Shank (52)
    • Toolholder (67)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.625 in(1)
    • 2.3622 in(1)
    • 3.25 in(2)
    • 3.3465 in(2)
    • 3.937 in(4)
    • 3.94 in(2)
    • 4.9213 in(5)
    • 5.0 in(10)
    • 5.9055 in(13)
    • 6.0 in(18)
    • 6.06 in(1)
    • 6.1 in(2)
    • 6.11 in(2)
    • 6.6929 in(5)
    • 6.89 in(4)
    • 7.0 in(11)
    • 7.0866 in(10)
    • 7.087 in(1)
    • 7.874 in(5)
    • 8.0 in(1)
    • 9.8425 in(6)
    • 10.0 in(10)
    • 11.811 in(2)
    • 12.0 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 41.275 mm(1)
    • 60.0 mm(1)
    • 82.55 mm(2)
    • 85.0 mm(2)
    • 100.0 mm(6)
    • 125.0 mm(5)
    • 127.0 mm(10)
    • 150.0 mm(13)
    • 152.0 mm(2)
    • 152.4 mm(15)
    • 153.0 mm(1)
    • 154.0 mm(2)
    • 155.0 mm(3)
    • 170.0 mm(5)
    • 175.0 mm(4)
    • 177.8 mm(9)
    • 178.0 mm(2)
    • 180.0 mm(11)
    • 200.0 mm(5)
    • 203.2 mm(1)
    • 250.0 mm(6)
    • 254.0 mm(10)
    • 300.0 mm(2)
    • 304.8 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(18)
    • 0.002 in(107)
    • 0.003 in(74)
    • 0.004 in(30)
    • 0.006 in(31)
    • 0.008 in(46)
    • 0.009 in(8)
    • 0.011 in(50)
    • 0.012 in(15)
    • 0.017 in(22)
    • 0.021 in(22)
    • 0.026 in(3)
    • 0.028 in(17)
    • 0.03 in(29)
    • 0.036 in(9)
    • 0.038 in(1)
    • 0.039 in(15)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(18)
    • 0.05 mm(107)
    • 0.075 mm(74)
    • 0.1 mm(30)
    • 0.15 mm(31)
    • 0.2 mm(46)
    • 0.225 mm(8)
    • 0.275 mm(50)
    • 0.3 mm(15)
    • 0.425 mm(22)
    • 0.525 mm(22)
    • 0.65 mm(3)
    • 0.7 mm(17)
    • 0.75 mm(29)
    • 0.925 mm(9)
    • 0.975 mm(1)
    • 1.0 mm(15)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(366)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(366)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC5010 (150)
    • KC5025 (417)
    • KC720 (36)
    • KC730 (28)
    Hand Of Tool
    Hand Of Tool
    • L (48)
    • R (72)
    F Dimension
    F Dimension
    • 7.112 mm(4)
    • 7.3 mm(4)
    • 8.89 mm(3)
    • 8.9 mm(2)
    • 10.3 mm(1)
    • 11.3 mm(2)
    • 11.5 mm(2)
    • 11.684 mm(4)
    • 11.7 mm(1)
    • 12.0 mm(1)
    • 12.7 mm(2)
    • 12.954 mm(4)
    • 13.4 mm(3)
    • 15.6 mm(2)
    • 15.8 mm(1)
    • 15.875 mm(1)
    • 16.0 mm(5)
    • 16.002 mm(2)
    • 16.1 mm(2)
    • 16.3 mm(2)
    • 16.51 mm(3)
    • 17.2 mm(2)
    • 17.4 mm(1)
    • 18.034 mm(3)
    • 19.05 mm(4)
    • 19.558 mm(1)
    • 20.0 mm(4)
    • 21.5 mm(2)
    • 21.59 mm(1)
    • 25.0 mm(11)
    • 25.4 mm(11)
    • 25.8 mm(2)
    • 31.75 mm(8)
    • 32.0 mm(13)
    • 38.1 mm(2)
    • 38.887 mm(1)
    • 40.0 mm(3)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.28 in(4)
    • 0.2874 in(4)
    • 0.35 in(3)
    • 0.3504 in(2)
    • 0.4055 in(1)
    • 0.4449 in(2)
    • 0.4528 in(2)
    • 0.46 in(4)
    • 0.463 in(1)
    • 0.4724 in(1)
    • 0.5 in(2)
    • 0.51 in(4)
    • 0.5276 in(3)
    • 0.6142 in(2)
    • 0.622 in(1)
    • 0.625 in(1)
    • 0.6299 in(5)
    • 0.63 in(2)
    • 0.6339 in(2)
    • 0.6417 in(2)
    • 0.65 in(3)
    • 0.6772 in(2)
    • 0.685 in(1)
    • 0.71 in(3)
    • 0.75 in(4)
    • 0.77 in(1)
    • 0.7874 in(4)
    • 0.8465 in(2)
    • 0.85 in(1)
    • 0.9843 in(11)
    • 1.0 in(11)
    • 1.0157 in(2)
    • 1.25 in(8)
    • 1.2598 in(13)
    • 1.5 in(2)
    • 1.531 in(1)
    • 1.5748 in(3)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 12.7 mm(4)
    • 13.0 mm(4)
    • 16.0 mm(2)
    • 16.51 mm(3)
    • 17.0 mm(1)
    • 20.0 mm(5)
    • 20.32 mm(4)
    • 22.86 mm(4)
    • 24.0 mm(3)
    • 27.0 mm(2)
    • 29.0 mm(5)
    • 30.48 mm(3)
    • 31.75 mm(3)
    • 32.0 mm(3)
    • 36.83 mm(1)
    • 38.1 mm(1)
    • 39.0 mm(2)
    • 47.0 mm(2)
    • 76.962 mm(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.5 in(4)
    • 0.5118 in(4)
    • 0.6299 in(2)
    • 0.65 in(3)
    • 0.6693 in(1)
    • 0.787 in(1)
    • 0.7874 in(4)
    • 0.8 in(4)
    • 0.9 in(4)
    • 0.9449 in(3)
    • 1.063 in(2)
    • 1.1417 in(5)
    • 1.2 in(3)
    • 1.25 in(3)
    • 1.2598 in(3)
    • 1.45 in(1)
    • 1.5 in(1)
    • 1.5354 in(2)
    • 1.8504 in(2)
    • 3.03 in(1)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 10.0 (3)
    • 14.5 (24)
    • 15.0 (12)
    • 27.5 (53)
    • 30.0 (274)
    Countersunk Angle MinkomuCountersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (67)
    • S (53)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (99)
    • NEGATIVE-ZERO (21)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.9843 in(2)
    • 1.0 in(2)
    • 1.25 in(2)
    • 1.2598 in(3)
    • 1.415 in(1)
    • 1.5 in(2)
    • 1.57 in(1)
    • 1.5748 in(3)
    • 2.25 in(2)
    • 2.3622 in(2)
    • 2.5 in(4)
    • 2.5196 in(2)
    • 3.0 in(2)
    • 3.1496 in(4)
    • 3.75 in(2)
    • 3.7794 in(1)
    • 3.9372 in(4)
    • 4.5 in(2)
    • 4.7244 in(1)
    • 5.0 in(2)
    • 5.0392 in(3)
    • 5.9058 in(1)
    • 6.0 in(2)
    • 6.2992 in(2)
    • 10.0 in(1)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.0 mm(2)
    • 25.4 mm(2)
    • 31.75 mm(2)
    • 32.0 mm(3)
    • 35.94 mm(1)
    • 38.1 mm(2)
    • 39.878 mm(1)
    • 40.0 mm(3)
    • 57.15 mm(2)
    • 60.0 mm(2)
    • 63.5 mm(4)
    • 64.0 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(4)
    • 95.25 mm(2)
    • 96.0 mm(1)
    • 100.0 mm(4)
    • 114.3 mm(2)
    • 120.0 mm(1)
    • 127.0 mm(2)
    • 128.0 mm(3)
    • 150.0 mm(1)
    • 152.4 mm(2)
    • 160.0 mm(2)
    • 254.0 mm(1)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (12)
    • S (41)
    frontEnd
    Clamp Style
    Clamp Style
    • C (58)
    • M (24)
    • S (17)
    • Y (21)
    Thread TPI
    Thread TPI
    • 4.0 (10)
    • 5.0 (8)
    • 6.0 (8)
    • 7.0 (8)
    • 8.0 (19)
    • 9.0 (1)
    • 10.0 (13)
    • 11.0 (10)
    • 11.5 (7)
    • 12.0 (18)
    • 14.0 (42)
    • 16.0 (21)
    • 18.0 (17)
    • 19.0 (5)
    • 20.0 (14)
    • 24.0 (10)
    • 27.0 (1)
    • 28.0 (9)
    • 32.0 (9)
    • 36.0 (1)
    • 40.0 (2)
    • 48.0 (29)
    Thread TPI MinkomuThread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.35 mm(1)
    • 0.4 mm(1)
    • 0.5 mm(7)
    • 0.75 mm(7)
    • 0.8 mm(1)
    • 1.0 mm(13)
    • 1.25 mm(9)
    • 1.5 mm(30)
    • 1.75 mm(7)
    • 2.0 mm(12)
    • 2.5 mm(8)
    • 3.0 mm(32)
    • 3.5 mm(3)
    • 4.0 mm(4)
    • 4.5 mm(2)
    • 5.0 mm(10)
    Thread Pitch MinkomuThread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.35 in(1)
    • 0.4 in(1)
    • 0.5 in(7)
    • 0.75 in(7)
    • 0.8 in(1)
    • 1.0 in(13)
    • 1.25 in(9)
    • 1.5 in(30)
    • 1.75 in(7)
    • 2.0 in(12)
    • 2.5 in(8)
    • 3.0 in(32)
    • 3.5 in(3)
    • 4.0 in(4)
    • 4.5 in(2)
    • 5.0 in(10)
    Thread Pitch MinkomuThread Pitch Max
    insertGeometry
    Shape
    Shape
    • LT-TRIANGLE LAY DOWN THREAD 60 (366)
    Insert IC Size
    Insert IC Size
    • 4.0 mm(1)
    • 5.0 mm(7)
    • 6.35 mm(44)
    • 9.525 mm(269)
    • 12.7 mm(41)
    • 15.875 mm(4)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.1575 in(1)
    • 0.1696 in(1)
    • 0.1969 in(6)
    • 0.25 in(44)
    • 0.375 in(269)
    • 0.5 in(41)
    • 0.625 in(4)
    Insert IC Size MinkomuInsert IC Size Max
    Insert Seat Size
    Insert Seat Size
    • 11 (1)
    • 16 (3)
    • 6 (1)
    • 8 (7)
    Cutting Edge Length
    Cutting Edge Length
    • 6.928 mm(1)
    • 8.66 mm(7)
    • 11.0 mm(1)
    • 16.498 mm(3)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.2728 in(1)
    • 0.341 in(7)
    • 0.433 in(1)
    • 0.6495 in(3)
    Cutting Edge Length MinkomuCutting Edge Length Max
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (52)
    • BORING BAR HEAD (1)
    • SQUARE SHANK (67)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(2)
    • 10.0 mm(2)
    • 12.7 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(3)
    • 19.05 mm(10)
    • 20.0 mm(12)
    • 25.0 mm(5)
    • 25.4 mm(2)
    • 31.75 mm(6)
    • 32.0 mm(5)
    • 40.0 mm(2)
    • 63.5 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Shank Height
    Shank Height
    • 0.4724 in(2)
    • 0.5 in(2)
    • 0.5835 in(2)
    • 0.6067 in(1)
    • 0.625 in(3)
    • 0.6299 in(4)
    • 0.7409 in(11)
    • 0.75 in(7)
    • 0.7642 in(1)
    • 0.7874 in(7)
    • 0.9378 in(4)
    • 0.961 in(1)
    • 0.9843 in(15)
    • 1.0 in(13)
    • 1.2134 in(5)
    • 1.25 in(5)
    • 1.2598 in(9)
    • 1.5283 in(2)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 12.0 mm(2)
    • 12.7 mm(2)
    • 14.82 mm(2)
    • 15.41 mm(1)
    • 15.875 mm(2)
    • 15.88 mm(1)
    • 16.0 mm(4)
    • 18.82 mm(11)
    • 19.05 mm(7)
    • 19.41 mm(1)
    • 20.0 mm(7)
    • 23.82 mm(4)
    • 24.41 mm(1)
    • 25.0 mm(15)
    • 25.4 mm(13)
    • 30.82 mm(5)
    • 31.75 mm(5)
    • 32.0 mm(9)
    • 38.82 mm(2)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.4724 in(2)
    • 0.5 in(2)
    • 0.625 in(3)
    • 0.6299 in(4)
    • 0.75 in(7)
    • 0.7874 in(8)
    • 0.8646 in(4)
    • 0.9843 in(14)
    • 1.0 in(13)
    • 1.1402 in(5)
    • 1.25 in(5)
    • 1.2598 in(9)
    • 1.4551 in(2)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 12.0 mm(2)
    • 12.7 mm(2)
    • 15.875 mm(2)
    • 15.88 mm(1)
    • 16.0 mm(4)
    • 19.05 mm(7)
    • 20.0 mm(8)
    • 21.96 mm(4)
    • 25.0 mm(14)
    • 25.4 mm(13)
    • 28.96 mm(5)
    • 31.75 mm(5)
    • 32.0 mm(9)
    • 36.96 mm(2)
    Shank Width MinkomuShank Width Max
    No filters matching ""
    Závitování LT
    Břitové destičky
    (366)

    Břitové destičky

    Závitování LT – držáky nástrojů
    (67)

    Závitování LT – držáky nástrojů

    Závitování LT – vyvrtávací tyče
    (52)

    Závitování LT – vyvrtávací tyče

    Závitování LT – vyvrtávací hlavy
    (1)

    Závitování LT – vyvrtávací hlavy

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk