Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5528979 |
| ISO katalogové ID | SECX1404AEENGN |
| ANSI katalogové ID | SECX443AEEN7GN |
| Grade | KCSM30 |
| [D] Insert IC Size | 14 mm |
| [D] Insert IC Size | 0.551 in |
| [BS] Corner Facet Length | 1.85 mm |
| [BS] Corner Facet Length | 0.073 in |
| [L10] Insert Cutting Edge Length | 14 mm |
| [L10] Insert Cutting Edge Length | 0.5512 in |
| [Rε] Corner Radius | 1 mm |
| [Rε] Corner Radius | 0.039 in |
| [S] Insert Thickness | 4.763 mm |
| [S] Insert Thickness | 0.1875 in |
| Average Chip Thickness [HM] | 0.064 mm |
| Average Chip Thickness [HM] | 0.0025 in |
| Cutting Edges per Insert | 4 |
Karbidy
KCSM30
Submicron substrate coated with high-performance TiAlN-PVD coating is an excellent choice for titanium, but also high-temperature alloys and stainless with higher speeds for light to medium cuts. First choice for application with thin to medium chip thickness, dry and wet.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..NGD2 | 0,88 | 1,70 | 2,85 | 0,65 | 1,26 | 2,09 | 0,57 | 1,10 | 1,82 | 0,53 | 1,02 | 1,69 | 0,52 | 1,00 | 1,66 | .E..NGD2 |
| .E..NGN | 0,88 | 1,70 | 2,85 | 0,65 | 1,26 | 2,09 | 0,57 | 1,10 | 1,82 | 0,53 | 1,02 | 1,69 | 0,52 | 1,00 | 1,66 | .E..NGN |
| .S..NGN | 1,04 | 2,03 | 3,41 | 0,78 | 1,50 | 2,49 | 0,68 | 1,30 | 2,16 | 0,63 | 1,22 | 2,01 | 0,62 | 1,19 | 1,97 | .S..NGN |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..NGD2 | .035 | .071 | .129 | .026 | .050 | .085 | .022 | .043 | .072 | .021 | .040 | .066 | .020 | .039 | .065 | .E..NGD2 |
| .E..NGN | .035 | .071 | .129 | .026 | .050 | .085 | .022 | .043 | .072 | .021 | .040 | .066 | .020 | .039 | .065 | .E..NGN |
| .S..NGN | .043 | .087 | .165 | .031 | .061 | .103 | .027 | .052 | .086 | .025 | .048 | .080 | .024 | .047 | .078 | .S..NGN |
| Materiálová skupina | KC725M | |||
| P | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | – | – | – | |
| 5 | – | – | – | |
| 6 | – | – | – | |
| M | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| K | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| N | 1 | – | – | – |
| 2 | – | – | – | |
| S | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | 75 | 55 | 35 | |
| H | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| Materiálová skupina | KC725M | |||
| P | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | – | – | – | |
| 5 | – | – | – | |
| 6 | – | – | – | |
| M | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| K | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| N | 1 | – | – | – |
| 2 | – | – | – | |
| S | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| 4 | 240 | 180 | 120 | |
| H | 1 | – | – | – |
| 2 | – | – | – | |
| 3 | – | – | – | |
| Průměr nástroje | Maximální zavrtávání | Ap1 max | Minimální průměr otvoru (DH) | Minimální průměr otvoru pro ploché (DH1) | Max. průměr otvoru (není ploché dno) |
| 50mm | 2,11° | 1,65 | 96,34 | 78,02 | 100 |
| 52mm | 1,97° | 1,65 | 100,34 | 82,02 | 104 |
| 63mm | 1,46° | 1,65 | 122,34 | 104,02 | 126 |
| 66mm | 1,37° | 1,65 | 128,34 | 110,02 | 132 |
| 80mm | 1,04° | 1,65 | 156,34 | 138,02 | 160 |
| 100mm | 0,78° | 1,65 | 196,34 | 178,02 | 200 |
| 125mm | 0,59° | 1,65 | 246,34 | 228,02 | 250 |
| Rt | Wt | t |
| 4,1 | 11,0 | 1,3 |
| cutter diameter | max ramping | Ap1 max | min hole diameter (DH) | min flat-bottom hole diameter (DH1) | max hole diameter no flat bottom |
| 2.0" | 2.05° | .065" | 3.856" | 3.134" | 4.0" |
| 2.5" | 1.45° | .065" | 4.856" | 4.134" | 5.0" |
| 3.0" | 1.11° | .065" | 5.856" | 5.134" | 6.0" |
| 4.0" | 0.76° | .065" | 7.856" | 7.134" | 8.0" |
| 5.0" | 0.58° | .065" | 9.856" | 9.134" | 10.0" |
| Rt | Wt | t |
| .161 | .433 | .051 |
| Materiálová skupina | Lehké obrábění | Všeobecné použití | Těžké obrábění | |||
| – | (Lehká geometrie) | – | (Silná geometrie) | |||
| – | Odolnost proti opotřebení |  | Houževnatost | |||
| – | Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta |
| P1–P2 | – | – | – | – | – | – |
| P3–P4 | – | – | – | – | – | – |
| P5–P6 | – | – | – | – | – | – |
| M1–M2 | – | – | – | – | – | – |
| M3 | – | – | – | – | – | – |
| K1–K2 | – | – | – | – | – | – |
| K3 | – | – | – | – | – | – |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | – | – | – | – | – | – |
| S3 | – | – | – | – | – | – |
| S4 | .E..NGD2 | KC725M | .E..NGN | KC725M | .S..NGN | KC725M |
| H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?