KM4X™

Selecionar filtros
Filtros
    Exibir filtros em
    Métrico
    Polegada
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (169)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(169)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(169)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(169)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(169)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(169)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(169)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(169)
    • M Stainless Steel (167)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(167)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(167)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(167)
    • K Cast Iron (169)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(169)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(169)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(169)
    • N Non-Ferrous Materials (157)
      • N1
        Wrought Aluminum (157)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(155)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(103)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (157)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (155)
      • N6
        Carbon, Graphite Composites, CFRP (155)
      • N7
        MMC's (147)
    • S High-Temp Alloys (163)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(163)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(163)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(163)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(163)
    • H Hardened Materials (129)
      • H1
        Hardened Materials 44-48 HRC(129)
      • H2
        Hardened Materials 48-55 HRC(129)
      • H3
        Hardened Materials 56-60 HRC(127)
      • H4
        Hardened Materials >60 HRC(111)
    • C CFRP Materials (130)
      • C1
        CFRP, CFRP / CFRP (130)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (126)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (17)
    • Cut-OffCut-Off (4)
    • Deep GroovingDeep Grooving (20)
    • Face GroovingFace Grooving (6)
    • FacingFacing (133)
    • GroovingGrooving (20)
    • ID FacingID Facing (80)
    • ID GroovingID Grooving (16)
    • ID Thread TurningID Thread Turning (22)
    • Multiple Direction CuttingMultiple Direction Cutting (99)
    • OD Thread TurningOD Thread Turning (26)
    • Plunge TurningPlunge Turning (16)
    • ProfilingProfiling (81)
    • TRN BoringTRN Boring (122)
    • ThreadingThreading (24)
    • TurningTurning (141)
    Type of Thread
    Type of Thread
    • 55 (8)
    • 60 (22)
    • ACME (24)
    • API (20)
    • API BUTTRESS (4)
    • API RD (14)
    • BSPT (4)
    • BSW (16)
    • BUTTRESS (14)
    • M (16)
    • NPT (12)
    • NPTF (4)
    • RD DIN 405 (8)
    • STUB ACME (16)
    • TR DIN 103 (8)
    • UN (18)
    • UNJ (12)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (154)
    • Lightly Interrupted Cut (158)
    • Smooth Cut (160)
    • Varying Depth of Cut (160)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 0.0 (2)
    • 45.0 (5)
    • 48.0 (5)
    • 49.683 (2)
    • 50.0 (2)
    • 72.5 (1)
    • 75.0 (17)
    • 90.0 (54)
    • 93.0 (35)
    • 95.0 (42)
    • 107.5 (10)
    Tool Cutting Edge Angle MinaTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • KM (94)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (6)
    • 1.0 (100)
    • 2.0 (116)
    • 3.0 (34)
    • 4.0 (88)
    • 6.0 (18)
    • 8.0 (54)
    Cutting Edges Per Insert MinaCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.757 in(77)
    • 3.938 in(51)
    • 4.331 in(1)
    • 4.529 in(12)
    • 4.921 in(6)
    • 5.513 in(22)
    • 6.694 in(6)
    Over All Length [L] MinaOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 70.0 mm(77)
    • 100.0 mm(51)
    • 110.0 mm(1)
    • 115.0 mm(12)
    • 125.0 mm(6)
    • 140.0 mm(22)
    • 170.0 mm(6)
    Over All Length [L] MinaOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(3)
    • 0.002 in(26)
    • 0.003 in(18)
    • 0.004 in(88)
    • 0.005 in(9)
    • 0.006 in(17)
    • 0.007 in(15)
    • 0.008 in(85)
    • 0.01 in(15)
    • 0.011 in(10)
    • 0.012 in(11)
    • 0.014 in(38)
    • 0.015 in(1)
    • 0.016 in(117)
    • 0.017 in(4)
    • 0.019 in(14)
    • 0.02 in(9)
    • 0.021 in(3)
    • 0.023 in(18)
    • 0.024 in(10)
    • 0.027 in(2)
    • 0.028 in(1)
    • 0.03 in(1)
    • 0.031 in(129)
    • 0.033 in(6)
    • 0.035 in(14)
    • 0.037 in(2)
    • 0.038 in(1)
    • 0.039 in(10)
    • -0.039 in(6)
    • 0.047 in(129)
    • 0.049 in(8)
    • 0.055 in(1)
    • 0.06 in(9)
    • 0.062 in(26)
    • 0.063 in(119)
    • 0.069 in(8)
    • 0.078 in(8)
    • 0.079 in(14)
    • 0.089 in(14)
    • 0.094 in(23)
    • 0.095 in(56)
    • 0.098 in(6)
    • 0.125 in(12)
    • 0.126 in(23)
    • 0.157 in(4)
    • 0.237 in(1)
    • 0.25 in(2)
    • 0.315 in(3)
    • 0.375 in(2)
    • 0.394 in(1)
    • 0.492 in(1)
    • 0.5 in(2)
    • 0.63 in(1)
    Corner Radius MinaCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(3)
    • 0.05 mm(26)
    • 0.076 mm(18)
    • 0.1 mm(88)
    • 0.125 mm(9)
    • 0.151 mm(17)
    • 0.176 mm(15)
    • 0.2 mm(85)
    • 0.225 mm(9)
    • 0.25 mm(15)
    • 0.275 mm(10)
    • 0.301 mm(11)
    • 0.325 mm(19)
    • 0.351 mm(33)
    • 0.375 mm(1)
    • 0.4 mm(117)
    • 0.426 mm(4)
    • 0.45 mm(14)
    • 0.476 mm(4)
    • 0.5 mm(9)
    • 0.525 mm(3)
    • 0.576 mm(18)
    • 0.601 mm(10)
    • 0.65 mm(2)
    • 0.701 mm(1)
    • 0.75 mm(1)
    • 0.775 mm(8)
    • 0.8 mm(121)
    • 0.826 mm(6)
    • 0.9 mm(14)
    • 0.925 mm(2)
    • 0.976 mm(1)
    • 1.0 mm(10)
    • -1.0 mm(6)
    • 1.201 mm(129)
    • 1.25 mm(8)
    • 1.401 mm(1)
    • 1.5 mm(8)
    • 1.526 mm(1)
    • 1.576 mm(26)
    • 1.6 mm(119)
    • 1.75 mm(8)
    • 1.975 mm(8)
    • 2.0 mm(14)
    • 2.25 mm(14)
    • 2.375 mm(23)
    • 2.401 mm(56)
    • 2.5 mm(6)
    • 3.176 mm(12)
    • 3.2 mm(23)
    • 4.0 mm(4)
    • 6.0 mm(1)
    • 6.351 mm(2)
    • 8.0 mm(3)
    • 9.525 mm(2)
    • 10.0 mm(1)
    • 12.5 mm(1)
    • 12.701 mm(2)
    • 16.0 mm(1)
    Corner Radius MinaCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • 13E (77)
    • 241 (18)
    • AC5 (1)
    • CG4 (1)
    • CL4 (57)
    • CM2 (72)
    • CM3 (64)
    • CM4 (33)
    • CM5 (2)
    • CPX (80)
    • CW2 (37)
    • CW2015 (76)
    • CW5025 (80)
    • GH1 (2)
    • GX (44)
    • HCK10 (7)
    • HCK20 (1)
    • HK1500 (76)
    • HK35 (7)
    • HT2 (58)
    • HTX (37)
    • HWK15 (7)
    • K00326 (8)
    • K00331 (2)
    • K060 (33)
    • K090 (86)
    • K1 (39)
    • K1010P (2)
    • K10M (109)
    • K10P (99)
    • K10U (84)
    • K15 (3)
    • K15U (84)
    • K20K (105)
    • K21 (43)
    • K25M (86)
    • K25P (90)
    • K2885 (8)
    • K313 (142)
    • K35P (62)
    • K420 (90)
    • K45 (41)
    • K4H (8)
    • K68 (139)
    • K8735 (8)
    • KB1340 (27)
    • KB1345 (47)
    • KB1610 (53)
    • KB1625 (49)
    • KB1630 (47)
    • KB5610 (52)
    • KB5625 (57)
    • KB5630 (36)
    • KB9610 (78)
    • KB9640 (39)
    • KBH10 (72)
    • KBH10B (47)
    • KBH20 (87)
    • KBH20B (47)
    • KBK35 (18)
    • KC210 (70)
    • KC250 (77)
    • KC5010 (157)
    • KC5020P (8)
    • KC5025 (152)
    • KC5410 (134)
    • KC5510 (94)
    • KC5525 (65)
    • KC710 (38)
    • KC720 (110)
    • KC722 (34)
    • KC730 (130)
    • KC7310 (100)
    • KC732 (95)
    • KC8050 (139)
    • KC810 (143)
    • KC850 (159)
    • KC9010 (95)
    • KC9025 (132)
    • KC910 (132)
    • KC9105 (117)
    • KC9110 (151)
    • KC9120 (129)
    • KC9125 (137)
    • KC9125RR (11)
    • KC9140 (107)
    • KC9145 (103)
    • KC9210 (19)
    • KC9215 (92)
    • KC9225 (121)
    • KC9240 (126)
    • KC9240NEW (122)
    • KC9245 (94)
    • KC9315 (132)
    • KC9320 (128)
    • KC9325 (113)
    • KC935 (143)
    • KC950 (135)
    • KC990 (109)
    • KCD25 (35)
    • KCK05 (121)
    • KCK05B (106)
    • KCK15 (116)
    • KCK15B (125)
    • KCK20 (134)
    • KCK20B (138)
    • KCM15 (113)
    • KCM15B (111)
    • KCM25 (129)
    • KCM25B (117)
    • KCM25S (2)
    • KCM35 (111)
    • KCM35B (82)
    • KCP05 (107)
    • KCP05B (81)
    • KCP10 (137)
    • KCP10B (142)
    • KCP15 (6)
    • KCP20S (2)
    • KCP25 (140)
    • KCP25B (149)
    • KCP25C (139)
    • KCP30 (128)
    • KCP30B (103)
    • KCP40 (101)
    • KCP40B (109)
    • KCPK05 (94)
    • KCS10 (39)
    • KCS10B (116)
    • KCS25S (2)
    • KCU10 (153)
    • KCU10B (146)
    • KCU25 (141)
    • KCU25B (136)
    • KD050 (59)
    • KD081 (63)
    • KD100 (53)
    • KD120 (63)
    • KD1400 (52)
    • KD1405 (34)
    • KD1425 (68)
    • KM1 (36)
    • KMF (18)
    • KN10S (2)
    • KS15 (26)
    • KT1120 (16)
    • KT125 (70)
    • KT150 (43)
    • KT175 (76)
    • KT315 (113)
    • KT325 (58)
    • KT5020 (2)
    • KTP10 (80)
    • KTP25S (71)
    • KU10 (8)
    • KU10T (105)
    • KU25T (16)
    • KU30T (129)
    • KY1310 (51)
    • KY1320 (86)
    • KY1540 (47)
    • KY1615 (82)
    • KY2000 (49)
    • KY2100 (33)
    • KY3000 (96)
    • KY3400 (69)
    • KY3500 (90)
    • KY4000 (35)
    • KY4300 (42)
    • KY4400 (88)
    • KYHK15B (88)
    • KYK10 (43)
    • KYK25 (65)
    • KYK35 (90)
    • KYS25 (41)
    • KYS30 (51)
    • MC2 (2)
    • NL200 (37)
    • NL250 (94)
    • NL300 (85)
    • NL400 (47)
    • NL920 (76)
    • P25 (34)
    • PB100 (26)
    • PB170 (29)
    • PB250 (31)
    • PB300 (18)
    • PD100 (7)
    • PD50 (7)
    • PN120 (1)
    • PS5 (39)
    • SP0819 (73)
    • SP0A00 (7)
    • SP0PW3 (5)
    • SP3019 (61)
    • SP4019 (70)
    • SP4036 (2)
    • SP4066 (1)
    • SP4093 (2)
    • SP61EJ (7)
    • SPADAP (19)
    • SPN4W2 (4)
    • THM (69)
    • THM-X (51)
    • THMF-X (25)
    • TN10P (120)
    • TN10U (89)
    • TN15M (109)
    • TN15U (84)
    • TN2000 (85)
    • TN20K (113)
    • TN20P (117)
    • TN30M (111)
    • TN30P (94)
    • TN4000 (78)
    • TN5015 (100)
    • TN5020 (102)
    • TN5105 (83)
    • TN5120 (110)
    • TN6010 (72)
    • TN6025 (86)
    • TN7005 (71)
    • TN7010 (110)
    • TN7015 (119)
    • TN7025 (119)
    • TN7035 (102)
    • TN7105 (69)
    • TN7110 (118)
    • TN7115 (117)
    • TN7125 (111)
    • TN7135 (102)
    • TN8025 (110)
    • TTI15 (48)
    • TTM (6)
    • TTM09 (24)
    • TTR (44)
    • TTR-X (4)
    • TTS (57)
    • TTX (51)
    • W00342 (13)
    • WBH10C (72)
    • WBH10P (36)
    • WBH10U (53)
    • WBH20P (77)
    • WBH25P (43)
    • WBH25U (66)
    • WBH30P (36)
    • WBK40U (27)
    • WBK45U (58)
    • WDN00U (26)
    • WDN25U (52)
    • WK05CT (107)
    • WK15CT (73)
    • WK20CT (118)
    • WM15CT (113)
    • WM25CT (116)
    • WM35CT (94)
    • WP05CT (28)
    • WP15CT (125)
    • WP20TT (4)
    • WP25CT (125)
    • WP35CT (119)
    • WS10PT (105)
    • WS25PT (102)
    • WU05PT (13)
    • WU10HT (113)
    • WU10PT (83)
    • WU25PT (80)
    • X00511 (18)
    • X00580 (18)
    • X00581 (18)
    • X00582 (18)
    • X00583 (18)
    • X00584 (18)
    • X00585 (18)
    • X00586 (18)
    • X00591 (18)
    • X00592 (18)
    • X00593 (18)
    • X00594 (18)
    • X00596 (18)
    • X00597 (18)
    • X00599 (18)
    Hand Of Tool
    Hand Of Tool
    • L (44)
    • N (7)
    • R (43)
    Wiper Insert
    Wiper Insert
    • N (171)
    • Y (59)
    F Dimension
    F Dimension
    • 0.0 mm(3)
    • 8.0 mm(1)
    • 10.0 mm(1)
    • 12.5 mm(1)
    • 16.0 mm(1)
    • 17.0 mm(6)
    • 22.0 mm(12)
    • 27.0 mm(10)
    • 35.0 mm(6)
    • 38.0 mm(4)
    • 43.0 mm(35)
    • 58.0 mm(8)
    • 63.0 mm(6)
    F Dimension MinaF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(3)
    • 0.315 in(1)
    • 0.394 in(1)
    • 0.492 in(1)
    • 0.63 in(1)
    • 0.669 in(6)
    • 0.866 in(12)
    • 1.063 in(10)
    • 1.379 in(6)
    • 1.496 in(4)
    • 1.693 in(35)
    • 2.283 in(8)
    • 2.48 in(6)
    F Dimension MinaF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(4)
    • -1.0 mm(4)
    • 32.0 mm(6)
    • 40.0 mm(12)
    • 41.301 mm(2)
    • 47.6 mm(2)
    • 50.0 mm(10)
    • 57.2 mm(2)
    • 63.0 mm(6)
    • 80.0 mm(4)
    • 86.0 mm(38)
    • 88.9 mm(2)
    • 100.0 mm(12)
    • 120.0 mm(33)
    • 139.701 mm(2)
    • 174.601 mm(2)
    • 209.601 mm(2)
    • 222.3 mm(2)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(4)
    • -0.039 in(4)
    • 1.26 in(6)
    • 1.575 in(12)
    • 1.627 in(2)
    • 1.874 in(2)
    • 1.969 in(10)
    • 2.253 in(2)
    • 2.48 in(6)
    • 3.15 in(4)
    • 3.386 in(38)
    • 3.5 in(2)
    • 3.938 in(12)
    • 4.724 in(33)
    • 5.5 in(2)
    • 6.875 in(2)
    • 8.252 in(2)
    • 8.752 in(2)
    Minimum Axial Groove Diameter MinaMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -0.039 in(6)
    • 393.661 in(19)
    Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -1.0 mm(6)
    • 9999.0 mm(19)
    Maximum Axial Groove Diameter MinaMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (22)
    • E (24)
    • S (48)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (61)
    • NEGATIVE-ZERO (13)
    • NEUTRAL (ZERO) (15)
    Maximum Bore Depth
    Maximum Bore Depth
    • 2.757 in(42)
    • 3.477 in(6)
    • 3.938 in(33)
    • 4.42 in(12)
    • 4.485 in(3)
    • 4.49 in(7)
    • 4.529 in(12)
    • 5.671 in(6)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 70.0 mm(42)
    • 88.325 mm(6)
    • 100.0 mm(33)
    • 112.275 mm(12)
    • 113.926 mm(3)
    • 114.051 mm(7)
    • 115.0 mm(12)
    • 144.05 mm(6)
    Maximum Bore Depth MinaMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (40)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • BOEING TAPER FLANGE (1)
    • BORING BAR ADAPTER (2)
    • CARTRIDGE MOUNT (12)
    • COMBI SHELL ADAPTER (5)
    • CUTOFF SUPPORT BLADE (6)
    • END MILL ADAPTER (44)
    • ER COLLET CHUCK (16)
    • FM ADAPTER (1)
    • HTS MODULAR ADAPTER (2)
    • HYDRAULIC CHUCK (59)
    • HYDRAULIC CHUCK-HIGH TORQUE (9)
    • HYDRAULIC CHUCK-SLIM LINE (7)
    • KM MODULAR ADAPTER (25)
    • REDUCER (4)
    • SCREW-ON ADAPTER (19)
    • SHELL MILL ADAPTER (64)
    • SHRINK FIT ADAPTER (93)
    • SQUARE SHANK ADAPTER (17)
    • TUNABLE SHELL MILL ADAPTER (6)
    • WHISTLE DRIVE ADAPTER (1)
    • WHISTLE NOTCH ADAPTER (20)
    Clamp Style
    Clamp Style
    • D (41)
    • M (33)
    • N (28)
    • P (35)
    • S (35)
    • X (3)
    Cutting Width
    Cutting Width
    • 0.039 in(8)
    • 0.047 in(8)
    • 0.06 in(8)
    • 0.062 in(8)
    • 0.069 in(8)
    • 0.073 in(8)
    • 0.078 in(8)
    • 0.079 in(8)
    • 0.088 in(8)
    • 0.089 in(4)
    • 0.094 in(4)
    • 0.095 in(8)
    • 0.097 in(8)
    • 0.098 in(8)
    • 0.105 in(8)
    • 0.108 in(8)
    • 0.11 in(8)
    • 0.119 in(14)
    • 0.122 in(8)
    • 0.125 in(14)
    • 0.126 in(14)
    • 0.128 in(8)
    • 0.131 in(4)
    • 0.138 in(14)
    • 0.143 in(8)
    • 0.156 in(8)
    • 0.157 in(14)
    • 0.167 in(14)
    • 0.169 in(8)
    • 0.177 in(14)
    • 0.178 in(8)
    • 0.185 in(11)
    • 0.188 in(14)
    • 0.189 in(14)
    • 0.192 in(4)
    • 0.193 in(4)
    • 0.195 in(8)
    • 0.196 in(8)
    • 0.197 in(10)
    • 0.202 in(6)
    • 0.213 in(6)
    • 0.217 in(6)
    • 0.218 in(2)
    • 0.219 in(6)
    • 0.237 in(10)
    • 0.25 in(12)
    • 0.256 in(6)
    • 0.276 in(4)
    • 0.281 in(6)
    • 0.312 in(6)
    • 0.315 in(2)
    • 0.345 in(4)
    • 0.354 in(4)
    • 0.375 in(6)
    • 0.381 in(4)
    • 0.384 in(2)
    Cutting Width MinaCutting Width Max
    Cutting Width
    Cutting Width
    • 1.0 mm(8)
    • 1.201 mm(8)
    • 1.5 mm(8)
    • 1.576 mm(8)
    • 1.75 mm(8)
    • 1.826 mm(8)
    • 1.975 mm(8)
    • 2.0 mm(8)
    • 2.2 mm(8)
    • 2.225 mm(8)
    • 2.25 mm(4)
    • 2.375 mm(4)
    • 2.401 mm(8)
    • 2.475 mm(8)
    • 2.5 mm(8)
    • 2.676 mm(8)
    • 2.75 mm(8)
    • 2.801 mm(8)
    • 3.0 mm(14)
    • 3.1 mm(8)
    • 3.176 mm(14)
    • 3.2 mm(14)
    • 3.25 mm(8)
    • 3.325 mm(4)
    • 3.5 mm(14)
    • 3.6 mm(8)
    • 3.95 mm(8)
    • 3.975 mm(4)
    • 4.0 mm(14)
    • 4.25 mm(14)
    • 4.3 mm(8)
    • 4.5 mm(14)
    • 4.525 mm(8)
    • 4.7 mm(11)
    • 4.775 mm(14)
    • 4.801 mm(14)
    • 4.875 mm(4)
    • 4.9 mm(4)
    • 4.95 mm(8)
    • 4.976 mm(8)
    • 5.0 mm(10)
    • 5.125 mm(6)
    • 5.4 mm(6)
    • 5.5 mm(6)
    • 5.525 mm(2)
    • 5.575 mm(6)
    • 6.0 mm(10)
    • 6.351 mm(12)
    • 6.5 mm(6)
    • 7.0 mm(4)
    • 7.125 mm(6)
    • 7.926 mm(6)
    • 8.0 mm(2)
    • 8.75 mm(4)
    • 9.0 mm(4)
    • 9.525 mm(6)
    • 9.675 mm(4)
    • 9.75 mm(2)
    Cutting Width MinaCutting Width Max
    Front End Type
    Front End Type
    • BTF - BTF (1)
    • FDA - Milling Cutter Arbor (69)
    • FLK - Flange Adapter Kenna (1)
    • HTS - Deep Hole Index Drill (2)
    • KMS - KM TBD System (2)
    • KMT - KM Adapter (27)
    • MCS - Modular Cartridge System (12)
    • PMK - Prismatic Adapter Kenna (6)
    • SPK-Holding Arbor-Spindle Head (6)
    • SZK - Collet Taper (16)
    • VKT - Square Shank (17)
    • ZYL - Cylindrical Adapter (254)
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (44)
    • D-DIAMOND/RHOMBIC 55 (30)
    • LT-TRIANGLE LAY DOWN THREAD 60 (12)
    • R-ROUND (13)
    • S-SQUARE 90 (14)
    • T-TRIANGLE 60 (16)
    • TN-TOP NOTCH (20)
    • V-DIAMOND/RHOMBIC 35 (16)
    • W-TRIGON 80 (10)
    Front End Style
    Front End Style
    • BTF01 Standard BTF (1)
    • FDA03 Longit &Transver Drive (5)
    • FDA22 Transv Drive & SHCS (64)
    • FLK32FlngMt 3&6Bolt 67&97DBC (1)
    • HTS01 Standard HTS Shank (2)
    • KMS-02 Englarged Flange OnCntr (2)
    • KMT00 All KM, except 02,05,09 (23)
    • KMT09 KM4X 4 ball connection (4)
    • MCS01 Modular Deep Grooving (12)
    • PMK02 Cutoff Sup Bld A1-A3 (6)
    • SPK02 Bolt Circ Dia 101.6 mm (6)
    • SZK02 Collets 8 Degree Taper (16)
    • VKT01 Std Design (17)
    • ZYL01 Straight Shank (168)
    • ZYL03 Attachment Thread (19)
    • ZYL10 Weldon Shank (44)
    • ZYL13 2Deg-Whistle Notch (20)
    • ZYL22 Boring Bar Shank (2)
    • ZYL63 2Deg Surf w/Cyl.w/drive (1)
    Insert Size
    Insert Size
    • 3 (8)
    • 4 (6)
    • 5 (3)
    • 6 (3)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.209 in(1)
    • 0.21 in(5)
    • 0.294 in(4)
    • 0.416 in(2)
    • 1.299 in(1)
    • 1.581 in(1)
    • 1.974 in(1)
    • 2.368 in(1)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 5.301 mm(1)
    • 5.325 mm(5)
    • 7.476 mm(4)
    • 10.55 mm(2)
    • 33.0 mm(1)
    • 40.151 mm(1)
    • 50.151 mm(1)
    • 60.151 mm(1)
    Maximum Cutting Depth MinaMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 4 in(10)